JOURNAL PAPERS

Internal cooling passages

  1. S.V. Prabhu and R.P. Vedula, Pressure drop characteristics in a Rotating Smooth Square Channel with a sharp 180 bend, Experimental Thermal and Fluid Sciences, Vol. 21, pp. 198-205, 2000.

  2. S.V. Prabhu and R.P. Vedula, Pressure drop characteristics in a rib roughened rotating square duct with a sharp 180 bend, Journal of Enhanced Heat Transfer, Vol. 10, Issue 4, pp. 363-377, 2003.

  3. D.V. RatnaRao and S.V. Prabhu, Pressure drop distribution in smooth and rib roughened square channel with sharp 180 bend in the presence of guide vanes, International Journal of Rotating Machinery, Vol. 10, Issue 2, pp. 99-114, 2004.

  4. D.V. RatnaRao, Chakka Sarat Babu and S.V. Prabhu, Effect of turn region treatment on the pressure loss distribution in a smooth square channel with sharp 180 bends, International Journal of Rotating Machinery, Vol. 10, Issue 6, pp. 459-468, 2004.

  5. S.V. Prabhu, Neelab Arora and R.P. Vedula, Effect of channel orientation and rib pitch to height ratio on pressure drop in a rotating square channel with ribs on two opposite surfaces, International Journal of Rotating machinery, vol. 1, pp. 67-76, 2005.

  6. K. Arun and S.V. Prabhu, Effect of aspect ratio, channel orientation, rib pitch to height ratio and number of ribbed walls on pressure drop characteristics in a rotating channel with detached ribs, International Journal of Rotating Machinery, Volume 2007, Article ID 72190, 11 pages, doi: 10.1155/2007/72190, 2007.

  7. K. Arun and S.V. Prabhu, Effect of rotation, aspect ratio, channel orientation and rib height to pitch ratio on pressure drop and heat transfer characteristics in a rotating channel with ribs on one principal wall, Journal of Enhanced Heat Transfer, Vol. 14, Issue, 1, pp. 27-51, 2007.

  8. Abhishek Gupta, SriHarsha V, S.V. Prabhu and R.P. Vedula, Local heat transfer distribution in a square channel with 90 saw tooth profiled and 60 broken ribs, Experimental Thermal and Fluid Science, Vol. 32, Issue 4, pp. 997-1010, 2008.

  9. Sri Harsha.V, S.V.Prabhu and R.P.Vedula, Influence of rib height on the local heat transfer distribution and pressure drop in a Square Channel with 90 continuous and 60 V-broken ribs, Applied Thermal Engineering, Vol. 29, Issues 11-12, pp. 2444-2459, 2009.

  10. Amaey Indi, S.V.Prabhu and R.P.Vedula, Local heat transfer distribution in a rectangular pin channel with and without vortex generators, Experimental Heat Transfer, 2011, Vol. 58, pp. 24-34.

  11. Rambir Bhadouriya, Amit Agrawal, S.V. Prabhu, Experimental and numerical study of fluid flow and heat transfer in a twisted square duct, International Journal of Heat and Mass Transfer, 2015, 82, 143-158.

  12. Rambir Bhadouriya, Amit Agrawal, S.V. Prabhu, Laminar flow heat transfer studies in a twisted square duct for constant wall heat flux boundary condition, Sadhana, Indian Academy of Sciences 2015, 10.1007/s12046-015-0345-y.

  13. Rambir Bhadouriya, Amit Agrawal, S.V. Prabhu, Experimental and numerical study of fluid flow and heat transfer in an annulus of inner twisted square duct and outer circular pipe, International Journal of Thermal Sciences, 2015, 94, 96-109.

  14. P.W. Deshmukh, S.V. Prabhu, R.P. Vedula, Heat transfer enhancement for laminar flow in tubes using curved delta wing vortex generator inserts, Applied Thermal Engineering, 2016, 106, 1415-1426



Flowmetering

  1. S.V. Prabhu, Mascomani, Balakrishnan and Konnur, Effects of upstream pipe fittings on the performance of orifice and conical flowmeters, Flow Measurement and Instrumentation, Vol. 7, No. 1, pp. 49-56, 1996.

  2. Pradeep Gupta, K. Srinivasan and S.V. Prabhu, Tests on various configurations of Coriolis mass flowmeters, Measurement, Vol. 39, Issue 4, pp. 296-307, 2006.

  3. Venugopal, Amit Agrawal, and S.V. Prabhu, Influence of blockage and upstream Disturbances on the Performance of a Vortex Flowmeter with a Trapezoidal Bluff Body, Measurement, Vol. 43, pp. 603-616, 2010.

  4. Venugopal, Amit Agrawal, S.V. Prabhu, Influence of blockage and shape of a bluff body on the performance of vortex flowmeter with wall pressure measurement, Measurement, 2011, Vol. 44, pp. 954–964.

  5. Venugopal, Amit Agrawal, S.V. Prabhu, Frequency detection in vortex flowmeter for low Reynolds number using piezoelectric sensor and installation effects, Sensors and Actuators A 184 (2012) 78– 85.

  6. Venugopal, Amit Agrawal, S.V. Prabhu, Review on vortex flowmeter—Designer perspective, Sensors and Actuators A, 2011, Sensors and Actuators A 170 (2011) 8– 23.

  7. Kishor Borkar, A. Venugopal, S.V. Prabhu, Pressure Measurement Technique and Installation Effects on the Performance of Wafer Cone Design, Flow Measurement and Instrumentation, 2013, Vol. 30, pp – 52-59.

  8. Kishor Borkar, A. Venugopal, S.V. Prabhu, Study on the Design and Performance of a Bi-directional Cone Flowmeter, Flow Measurement and Instrumentation, Vol. 34, 2013, pp. 151-159.

  9. Lavish Ordia, Venugopal, Amit Agrawal, S.V. Prabhu, Influence of after body shape on the performance of blunt shaped bodies as vortex shedders, International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering Vol:7 No:10, 2013

  10. Venugopal, Amit Agrawal, S.V. Prabhu, Performance evaluation of piezoelectric and differential pressure sensor for vortex flowmeters, Measurement, Vol. 50, April 2014, pp. 10-18.

  11. Venugopal, Amit Agrawal, S.V. Prabhu, A Vortex Cross-Correlation Flowmeter with Enhanced Turndown Ratio, Review of Scientific Instruments, 85, 066109 (2014).

  12. Venugopal, Amit Agrawal, S.V. Prabhu, Spanwise Correlations in the Wake of a Circular Cylinder and a Trapezoid Placed inside a Circular Pipe, Journal of Fluids and Structures, 2015, 54, 536-547.



Rarified flows

  1. Amit Agrawal and S.V. Prabhu, Deduction of slip coefficient in slip and transition regimes from existing cylindrical Couette flow data, Experimental Thermal and Fluid Science, Vol. 32, Issue 4, pp. 991-996, 2008.

  2. Amit Agrawal and S.V.Prabhu, A survey on measurement of tangential momentum accommodation coefficient, Journal of Vacuum Science and Technology, A, Vol. 26, No. 4, pp. 634-645, 2008.

  3. Bhaskar Verma, Anwar Demsis, Amit Agrawal and S.V.Prabhu, Semi-empirical correlation for friction factor with gas flow through smooth microtube, Journal of Vacuum Science and Technology, A, Vol. 27, Issue 3, pp. 584-590, 2009.

  4. Anwar Demsis, Bhaskar Verma, S.V.Prabhu and Amit Agrawal, Experimental determination of heat transfer coefficient in the slip regime and its anomalously low value, Phys. Rev. E, Vol. 80, Issue. 1, 016311, pp. 1-8, 2009.

  5. Anwar Demsis, S.V. Prabhu and Amit Agrawal, Influence of wall conditions on friction factor for flow of gases under slip condition, Experimental Thermal and Fluid Science, Vol. 34, Issue 8, pp. 1448-1455, 2010.

  6. Anwar Demsis, Bhaskar Verma, S.V. Prabhu and Amit Agrawal, Heat transfer coefficient of gas flowing in a circular tube under rarefied condition, International Journal of Thermal Sciences, Vol. 49, pp. 1994-1999, 2010.

  7. Vijay Varade, Amit Agrawal, SV Prabhu, AM Pradeep, Velocity measurement in low Reynolds and low Mach number slip flow through a tube, Experimental Thermal and Fluid Sciences, Volume 60, January 2015, Pages 284–289.

  8. Vijay Varade, Amit Agrawal, SV Prabhu, AM Pradeep, Early onset of flow separation with rarefied gas flowing in a 90° bend tube, Experimental Thermal and Fluid Sciences, Volume 66, January 2015, Pages 221-234.



Wind Turbines and Hydrokinetic turbines

  1. M.A. Kamoji, S.B. Kedare and S.V. Prabhu, Experimental investigations on single stage, two stage and three stage convectional Savonius rotor, International Journal of Energy Research, Vol. 32, pp. 877 – 895, 2008.

  2. M. A. Kamoji, S. B. Kedare and S. V. Prabhu, Experimental Investigations on the effect of overlap ratio and blade edge conditions on the performance of conventional savonius rotor, Wind Engineering, Vol. 32, No. 2, pp. 163-178, 2008.

  3. M. A. Kamoji, S. B. Kedare and S. V. Prabhu, Performance tests on helical Savonius rotors, Renewable Energy, Volume 34, Issue 3, pp. 521-529, 2009.

  4. M. A. Kamoji, S. B. Kedare and S. V. Prabhu, Experimental investigations on single stage modified Savonius rotor, Applied Energy, Vol. 86, Issue 7-8, pp.1064-1073, 2009.

  5. Ghosh P., Kamoji M.A., Kedare S. B., and Prabhu S. V., Model testing of single and three stage modified Savonius rotors and viability study of modified Savonius pump rotor systems, International Journal of Green Energy, Vol. 6, pp. 22-41, 2009.

  6. P. Ghosh, M.A. Kamoji, A.W. Date and S.V. Prabhu, Experimental investigations on sail type wind-turbines, Wind Engineering, Vol. 33, No.4, pp.349-360, 2009.

  7. Kailash Golecha, T.I. Eldho, S.V. Prabhu, Influence of the deflector plate on the performance of modified Savonius water turbine, Applied Energy, 2011, Vol. 88, pp. 3207-3217, 2011.

  8. Kamoji M.A., Kedare S. B., and Prabhu S. V., Experimental investigations on two and three stage modified Savonius rotor, Wind Engineering, Vol. 35, No. 4, 2011, 483-510.

  9. Golecha Kailash, T. I. Eldho, and S. V. Prabhu, Performance Study of Modified Savonius Water Turbine with Two Deflector Plates, International Journal of Rotating Machinery, (2012), Article ID 679247, 12 pages, doi:10.1155/2012/679247.

  10. Golecha Kailash, T. I. Eldho and S. V. Prabhu, Study on the Interaction between Two Hydrokinetic Savonius Turbines, (2012), Article ID 581658, 10 pages, doi:10.1155/2012/581658.

  11. K. Golecha, M. A. Kamoji, S. B. Kedare and S. V. Prabhu, Review on Savonius rotor for harnessing wind energy, Wind Engineering, Vol. 36, No. 6, 2012, 605-645.

  12. C.R.Patel, V.K.Patel, S.V.Prabhu, T.I.Eldho, Investigation of Overlap Ratio for Savonius Type Vertical Axis Hydro Turbine, International Journal of Soft Computing and Engineering (IJSCE), Vol. 3, Issue 2, 2012

  13. S.V. Prabhu, Vimal Patel, Himanshu Chaudhari, Performance Prediction of H-Type Darrieus Turbine by Single Stream Tube Model for Hydro Dynamic Application, International Journal of Engineering, Vol. 2, Issue 3, 2013.


Jet Impingement

  1. P.M. Nakod, S.V. Prabhu and R.P. Vedula, Heat transfer augmentation between impinging circular air jet and flat plate using finned surfaces and vortex generators, Experimental Thermal and Fluid Science, Volume 32, Issue 4, pp. 1168-1187, 2008.

  2. Vadiraj Katti and S.V.Prabhu, Experimental study and theoretical analysis of local heat transfer distribution between smooth flat surface and an impinging air jet from a circular straight pipe nozzle, International Journal of Heat and Mass Transfer, Vol. 51, Issue 17-18, pp. 4480-4495, 2008.

  3. Puneet Gulati, Vadiraj Katti and S.V.Prabhu, Influence of the shape of the nozzle on local heat transfer distribution between smooth flat surface and impinging air jet, International Journal of Thermal Sciences, Volume 48, Issue 3, pp. 602-617, 2009.

  4. Vadiraj Katti and S.V.Prabhu, Influence of the spanwise pitch on local heat transfer for multiple jets with cross flow, AIAA, Journal of Thermophysics and Heat Transfer, Vol. 22, No.4, pp. 654-668, 2008.

  5. Vadiraj Katti and S.V.Prabhu, Heat transfer enhancement on a flat surface with axisymmetric detached ribs by normal impingement of circular air jet, International Journal of Heat and Fluid Flow, Vol. 29, Issue 5, 2008, pp. 1279-1294, 2008.

  6. Vadiraj Katti and S.V. Prabhu, Influence of spanwise pitch on local heat transfer distribution for in-line arrays of circular jets with spent air flow in two opposite directions, Experimental Thermal and Fluid Science, Vol. 33, Issue 1, pp. 84-95, 2008.

  7. Vadiraj Katti and S.V.Prabhu, Influence of streamwise pitch on the local heat transfer characteristics for in-line arrays of circular jets with crossflow of spent air in one direction” Heat and Mass Transfer, Vol. 45, pp. 1167-1184, 2009.

  8. Vadiraj Katti and S.V.Prabhu, Influence of streamwise pitch on local heat transfer distribution for in-line arrays of circular jets with spent air flow in two opposite directions, Experimental Heat Transfer, Vol. 22, pp. 228-256, 2009.

  9. S. Nagesh Yasaswy, Vadiraj Katti and S. V. Prabhu, Heat Transfer Distribution of Semicylindrical Concave Surface Impinged by Circular Jet Rows, AIAA, Journal of Thermophysics and Heat Transfer, Vol. 24, No. 4, pp. 765-776, 2010.

  10. M.D. Limaye, R.P.Vedula and S.V.Prabhu, Local heat transfer distribution on a flat plate impinged by a compressible round air jet, International Journal of Thermal Sciences, Vol. 49, Issue 11, pp. 2157-2168, 2010.

  11. M. Nirmalkumar, Vadiraj Katti, S.V. Prabhu, Local heat transfer distribution on a smooth flat plate impinged by a slot jet, International Journal of Heat and Mass Transfer, Vol. 54, pp. 727-738, 2011.

  12. Vadiraj V. Katti, S. Nagesh Yasaswy and S. V. Prabhu, Local heat transfer distribution between smooth flat surface and impinging air jet from a circular nozzle at low Reynolds numbers, Heat and Mass Transfer, Volume 47, Issue 3, pp.237-244, 2011.

  13. Vadiraj Katti and S.V.Prabhu, Influence of pitch on local heat transfer distribution for confined impingement of multiple jet arrays, Journal of Enhanced Heat Transfer, 2011, Vol. 18, Issue 1, pp. 41-53.

  14. M. D. Limaye, R. P. Vedula and S.V.Prabhu, Comparison of heat transfer distributions on a flat plate impinged by under-expanded jets from a convergent nozzle and a circular orifice, Heat and Mass Transfer, Oct 2012, DOI 10.1007/s00231-012-1089-4.

  15. M. D. Limaye, R. P. Vedula and S.V.Prabhu, Effect of the profile of a convergent nozzle on heat transfer distribution of a flat plate impinged by an under-expanded jet, (2012), Experimental Thermal and Fluids Sciences, http://dx.doi.org/10.1016/j.expthermflusci.2012.10.009.

  16. Vadiraj Katti, S. Sudheer and S.V. Prabhu, Pressure Distribution on a Semi-Circular Concave Surface Impinged by a Single Row of Circular Jets, Experimental and Thermal Fluid Sciences, Volume 46, April 2013, Pages 162–174.

  17. M. D. Limaye, R. P. Vedula and S.V.Prabhu, Influence of the shape of the orifice on the local heat transfer distribution of a flat plate impinged by under-expanded sonic jets, Experimental Heat Transfer, Vol. 27, 2014, pp. 403–427.

  18. Nagesh S. Yasaswy, Suresh kumar Saroj, Vijaykumar Hindasageri and S.V. Prabhu, Local Heat Transfer Distribution of an Impinging air Jet through a Crossflow, International Journal of Thermal Sciences, Vol. 79, May 2014, pp. 250-259.

  19. Ravish Vinze, S. Chandel, M. D. Limaye, and S.V.Prabhu, Influence of Jet Temperature and Nozzle Shape on the Heat Transfer Distribution between a Smooth Plate and Impinging Air Jets,
    International Journal of Thermal Sciences, Volume 99, January 2016, Pages 136–151.

  20. Hukam Chand Meena, S.A. Reodikar, Ravish Vinze and S.V.Prabhu, Ravish Vinze, S. Chandel, M. D. Limaye, and S.V.Prabhu, Influence of the Shape of the Orifice on the Local Heat Transfer Distribution between Smooth Flat Surface and Impinging Incompressible Air Jet,
    Experimental Thermal and Fluid Sciences, Volume 70, January 2016, Pages 292–306.

  21. S.A.Reodikar, Hukam Chand Meena, Ravish vinze and S.V.Prabhu, Influence of the orifice shape on the local heat transfer distribution and axis switching by compressible jets impinging on flat surface, International Journal of Thermal Sciences, Volume 104, June 2016, Pages 208–224.

  22. R. Vinze, S. Chandel, M.D. Limaye, S.V. Prabhu, , Local heat transfer distribution between smooth flat surface and impinging incompressible air jet from a chevron nozzle, Experimental Thermal and Fluid Science, 2016, 78, 124-136

  23. S.A. Reodikar, H.C. Meena, S.V. Prabhu, Influence of the orifice shape on the local heat transfer distribution and axis switching by compressible jets impinging on flat surface, International Journal of Thermal Sciences, 2016, 104, 208-224

  24. R. Vinze, A. Chollackal, M.D. Limaye, SV Prabhu , Heat transfer characteristics of the jet deflector impinged by underexpanded jets, Experimental Thermal and Fluid Science, Volume 78, November 2016, Pages 167–181

  25. R. Vinze, S. Chandel, M.D. Limaye, S.V. Prabhu, Effect of compressibility and nozzle configuration on heat transfer by impinging air jet over a smooth plate, Applied Thermal Engineering, Volume 101, 25 May 2016, Pages 293–307.

  26. H.C. Meena, S.A. Reodikar, R. Vinze, S.V. Prabhu, Influence of the shape of the orifice on the local heat transfer distribution between smooth flat surface and impinging incompressible air jet, Experimental Thermal and Fluid Science, 2016,70, 292-306.

  27. R Vinze, S Chandel, MD Limaye, SV Prabhu, Influence of jet temperature and nozzle shape on the heat transfer distribution between a smooth plate and impinging air jets, International Journal of Thermal Sciences, 2016, 99, 136-151.

  28. R. Vinze, M.D. Limaye, S.V. Prabhu, , Influence of the elliptical and circular orifices on the local heat transfer distribution of a flat plate impinged by under-expanded jets, Heat and Mass Transfer, 2017, 1-17



Nanofluids

  1. S. P. Pendalwar, U. V. Bhandarkar and S. V. Prabhu, Experimental and numerical investigations on convective heat transfer coefficient for the turbulent flow through pipe using nanofluid,” International Journal of Micro and Nano Systems, Vol. 1, Issue. 1, pp. 9-14, 2009.


Two phase flow and heat transfer

  1. K.Prabhul, P.K.Baburajan, S.K.Gupta and S.V.Prabhu, Experimental investigation on critical heat flux in horizontal channel for low pressure low flow (LPLF) condition, Annals of Nuclear Energy, Vol. 37, pp. 1467-1475, 2010.

  2. P.K. Baburajan, G.S. Bisht, S.K. Gupta, S.V. Prabhu, Measurement of subcooled boiling pressure drop and local heat transfer coefficient in horizontal tube under LPLF conditions, Nuclear Engineering and Design, Volume 255, February 2013, Pages 169–179.

  3. P.K.Baburajan, Govind Singh Bisht, Avinash Gaikwad, S.K.Gupta and S.V.Prabhu, Measurement of steady state CHF in horizontal channels for low pressure low flow conditions, Heat Transfer Engineering, 2015, 36 (4), 418-428.

  4. P.K.Baburajan, Govind Singh Bisht, Avinash Gaikwad, S.K.Gupta and S.V.Prabhu, Influence of stiffness on CHF for horizontal tubes under LPLF conditions, Nuclear Engineering and Design, Vol. 277, Oct 2014, Pages 15-27.

  5. Hardik Kothadia, P.K.Baburajan and S.V.Prabhu, Local Heat Transfer Coefficient in Helical Coils with Single Phase Flow, International Journal of heat and mass transfer, Vol. 89, 2015, 522–538.

  6. Subodh D. Deodhar, Hardik B. Kothadia, K.N. Iyer and S.V. Prabhu, Experimental and Numerical Studies of Choked Flow Through Adiabatic and Diabatic Capillary Tubes, Applied Thermal Engineering, Vol. 90, 2015, 879 – 894.

  7. B.K. Hardik, S.V. Prabhu, Boiling pressure drop and local heat transfer distribution of water in horizontal straight tubes at low pressure, International Journal of Thermal Sciences, 2016, 110, 65-82




Fire Dynamics

  1. S. Sudheer and S.V. Prabhu, Measurement of flame emissivity of gasoline pool fires, Nuclear Engineering and Design, Vol. 240, Issue 10, pp. 3474-3480, 2010.

  2. S. Sudheer and S.V. Prabhu, Measurement of Flame Emissivity of Hydrocarbon Pool Fires, Fire Technology, 2010, DOI: 10.1007/s10694-010-0206-5.

  3. Sudheer S., Prabhu S.V., Characterization of Hexane Pool Fires using Infrared Thermography, Journal of Fire Sciences, 2012, doi: 10.1177/0734904112459260

  4. Sudheer S., S. Desai and S.V. Prabhu, Physical Experiments and Fire Dynamic Simulations on Gasoline Pool Fires, Fire Safety Technology, 2013, Vol. 13, Issue 2, pp. 140-162.

  5. Sudheer S., Prabhu S.V., Heat Transfer in Vertical Casks Engulfed in Open Pool Fires, Journal of Fire Sciences, DOI: 10.1177/0734904113486324, 1-22.

  6. V. Mahendra Reddy, S. Sudheer, S.V. Prabhu, Sudarshan Kumar, Design and calibration of a new compactradiative heat-flux gauge (RHFG) for combustion applications, Sensors and Actuators A, Vol. 203, Issue 1, 2013, pp. 62-68.

  7. S. Sudheer, Lokendra Kumar, B.S. Manjunath, Amit Pasi, G. Meenakshi, S.V. Prabhu Fire Safety Distances for Open Pool Fires, Infrared physics and Technology, Vol. 61, 2013, pp. 265–273

  8. Vinay C Raj and S.V.Prabhu, Measurement of Surface Temperature and Emissivity of different materials by Two-Colour Pyrometry, Review of Scientific Instruments, Vol. 84, 124903, 2013.

  9. Sudheer S., Prabhu S.V., Partitioning of Convective and Radiative Heat Fluxes Absorbed by a Lumped Body Engulfed in a Diffusion Flame, Fire Technology, DOI: 10.1007/s10694-014-0412-7, 2014.

  10. S. Siddapureddy, K.D. Wehrstedt, S.V. Prabhu,Heat transfer to bodies engulfed in di-tert-butyl peroxide pool fires-Numerical simulations, Journal of Loss Prevention in the Process Industries, 2016, Volume 44, November 2016, Pages 204–211.



Melting and Solidification

  1. Lokendra Kumar, B.S. Manjunath, R.J. Patel, S.G. Markandeya, R.G. Agrawal, Ashish Agrawal, Y. Kashyap, P.S. Sarkar, Amar Sinha, K.N. Iyer, S.V. Prabhu, Experimental investigations on melting of lead in a cuboid with constant heat flux boundary condition using thermal neutron radiography, International Journal of Thermal Sciences 61 (2012), 15-27

  2. Partha S Sarkar, Ashish Agrawal, Yogesh Kashyap, Mayank Shukla, Amar Sinha, Lokendra Kumar, B. S.Manjunath, S. V. Prabhu and S.G. Markandeya, Visualization of Lead melting and solidification using Neutron radiography, International Journal of Nuclear Energy Science and Engineering, 2013, Vol. 3, Issue. 1, 7-14.

  3. Lokendra Kumar, Manjunath B.S., Patel R.J and Prabhu S.V., Experimental investigations on melting of lead in a cuboid with constant heat flux boundary condition at two vertical walls using Infra-red thermography, International Journal of Heat and Mass Transfer, Vol. 68, 2014, pp. 133-140.


Impinging flame jets

  1. Vijaykumar Hindasageri, R.P. Vedula, and S.V. Prabhu, Thermocouple Error Correction for measuring the flame temperature with determination of emissivity and heat transfer coefficient, Review of Scientific Instruments, 2013, Vol. 84, pp - 84, 024902, pp. 1-11.

  2. Vijaykumar Hindasageri, R.P. Vedula, and S.V. Prabhu, Blowoff Stability of Methane-Air Premixed Flame on Tube Burners, International Journal of Emerging Multidisciplinary Fluid Sciences, 2013, Vol. 3, No. 4, pp. 209-225.

  3. Vijaykumar Hindasageri, R.P. Vedula, and S.V. Prabhu, A Novel method of estimation of adiabatic wall temperature for impinging premixed flame jets, International Journal of Heat and Mass Transfer, 2014, Vol. 77, pp. 185–193.

  4. Vijaykumar Hindasageri, R.P. Vedula, and S.V. Prabhu, Heat transfer distribution for impinging methane–air premixed flame jets, Applied Thermal Engineering, 2014 Volume 73, Issue 1, Pages. 459-471

  5. Vijaykumar Hindasageri, R.P. Vedula, and S.V. Prabhu, A novel concept to estimate the steady state heat flux from impinging premixed flame jets in an enclosure by numerical IHCP technique, International Journal of Heat and Mass Transfer, 2014, 79, Pages. 342-352.

  6. Vijaykumar Hindasageri, P Kuntikana, RP Vedula, SV Prabhu, An experimental and numerical investigation of heat transfer distribution of perforated plate burner flames impinging on a flat plate, International Journal of Thermal Sciences 94, 156-169.

  7. Abdul Raouf Tajik, Pramod Kuntikana, Siddini V. Prabhu, Vijaykumar Hindasageri, Effect of preheated mixture on heat transfer characteristics of impinging methane-air premixed flame jet, International Journal of Heat and Mass Transfer, 2015, 86, 550-562.

  8. Vijaykumar Hindasageri, R.P. Vedula, and S.V. Prabhu, Heat transfer distribution for three interacting methane –air premixed impinging flame jets, International Journal of Heat and Mass Transfer, Volume 88, September 2015, Pages 914–925.

  9. Vijaykumar Hindasageri, R.P. Vedula, and S.V. Prabhu, Heat transfer distribution of swirling flame jet impinging on a flat plate using twisted tapes, International Journal of Heat and Mass Transfer, Volume 91, December 2015, Pages 1128–1139.

  10. Pramod Kuntikana and S.V. Prabhu, Isothermal air jet and premixed flame jet impingement: Heat transfer characterisation and comparison, International Journal of Thermal Sciences, Volume 100, February 2016, Pages 401–415.

  11. Pramod Kuntikana and S.V. Prabhu, Air jet impingement technique for thermal characterisation of premixed methane-air impinging flame jets, Applied Thermal Engineering, Volume 99, 25 April 2016, Pages 905–918.

  12. P.Kuntikana, S.V. Prabhu, Heat transfer characteristics of premixed methane–air flame jet impinging obliquely onto a flat surface, International Journal of Heat and Mass Transfer, 2016, 101, 133-146.

  13. V. Hindasageri, P. Kuntikana, A.R. Tajik, R.P. Vedula, S.V. Prabhu, Axis switching in impinging premixed methane-air flame jets, Applied Thermal Engineering, 2016 107, 144-153

  14. P. Kuntikana, S.V. Prabhu Isothermal air jet and premixed flame jet impingement: Heat transfer characterisation and comparison, International Journal of Thermal Sciences, 2016, 100, 401-415.

  15. P. Kuntikana, S.V. Prabhu, Air jet impingement technique for thermal characterisation of premixed methane–air impinging flame jets, Applied Thermal Engineering, 2016, 99, 905-918



Spray dynamics

  1. Manish Jain, Benny John, K.N.Iyer and S.V. Prabhu, Characterization of the full cone pressure swirl spray nozzles for the nuclear reactor containment spray system, Nuclear Engineering and Design, 2014, Vol. 273. pp. 131–142.

Packed Beds

  1. Surfarazhussain S Halkarni, Arunkumar Sirdharan, S.V. Prabhu, (2015), Influence of inserts on the pressure drop distribution in randomly packed beds with uniform sized spheres in the endshield model of AHWR, Experimental Thermal and Fluid Science Journal, Vol. 74, pp. 181-194.

  2. Surfarazhussain S Halkarni, Arunkumar Sirdharan, S.V. Prabhu, Estimation of volumetric heat transfer coefficient in randomly packed beds of uniform sized spheres with water as working medium, International Journal of Thermal Sciences, 2016, 110, 340-355.










REFEREED INTERNATIONAL CONFERENCES


REFEREED INTERNATIONAL CONFERENCES

CONFERENCE PROCEEDINGS


  1. S.V.Prabhu and R.P.Vedula, Local Heat Transfer in Far Upstream and Downstream Region of a Rotating Square Channel with a Sharp 1800 Bend – Proceeding of the Second ASME/ISHMT Heat and Mass Transfer Conference, Surathkal, India, 1995.

  2. S.V.Prabhu and R.P.Vedula, Pressure Drop Characteristics in a Rib Roughened Rotating square Duct with a Sharp 1800 Bend – Proceedings of the Fourth World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Brussels, Belgium, 1997.

  3. S.V.Prabhu and R.P.Vedula, Effect of Orientation angle on Pressure Drop in a Rotating Square Channel with Ribs on Two opposite Walls – Proceedings of the ASME Fluids Engg. Division Summer Meeting, Vancouver, USA, 1997.

  4. S.V.Prabhu and R.P.Vedula, Pressure Drop Distribution in a Rotating Rectangular Channel with One Ribbed Surface – Paper No. 97-A4-118, Proceedings of the ASME/ASIA 97 Congress, Singapore, 1997.

  5. S.V.Prabhu and R.P.Vedula, Local Heat Transfer Distribution within the bend region in a Rotating Square Channel with a Sharp 1800 Bend – Proceedings of the Third ISHMT-ASME Heat and Mass Transfer Conference, Kanpur, India, 1997, pp. 347-352.

  6. S.V.Prabhu and R.P.Vedula, Local Heat Transfer Distribution in a Rib Roughened Rotating Square Duct with Ribs on Two Opposite Surfaces – AIAA paper 2000-1037, Proceedings of the 38th Aerospace Sciences Meeting and Exhibit, Nevada, USA, 2000.

  7. Chakka Sarat Babu, Prasanta Das and S.V.Prabhu, Design, development and testing of a non-intrusive thermal sensor for local heat transfer coefficient - AIAA-2002-3108, Proceedings of the 8th Joint AIAA/ASME Thermophysics and Heat Transfer con ference, St. Louis, Missouri, USA, 2002.

  8. Chakka Sarat Babu, Prasanta Das and S.V.Prabhu, Local Heat Transfer Distribution in a Square Channel with Single Walled and Double Walled Ribs – AIAA- 2002-3088, Proceedings of the 8th Joint AIAA/ASME Thermophysics and Heat Transfer conference, St. Louis, Missouri, USA, 2002.

  9. Chakka Sarat Babu, Venkata Ratna Rao and S.V.Prabhu, Effect of turn treatments on the pressure drop distribution in a smooth square channel with sharp 1800 bends – Second International Conference on Fluid Mechanics and Fluid Power, I.I.T., Roorkee, India, 2002, pp. 489-501.

  10. D.Sarkar, S.Mondal, S.Kundu, D.J.Bordoloi and S.V.Prabhu, Installation Effects on the Cone Flow Meter - Second International Conference on Fluid Mechanics and Fluid Power, I.I.T., Roorkee, India, 2002, pp. 615-624.

  11. Venkata Ratna Rao, Chakka Sarat Babu, and S.V.Prabhu, Effects Of Turn Region Treatments On Pressure Loss Through Sharp 1800 Bends - AIAA-2003-1145, Proceedings of the 41st Aerospace Sceinces Meeting and Exhibit, Nevada, USA, 2003.

  12. Pradeep Gupta, K.Srinivasan and S.V.Prabhu, Experimental investigations on Various Configurations Of Coriolis Mass Flowmeters – Paper No. 77, Second International Conference on Vibration Engineering Technology of Machinery, Mumbai, India 2002.

  13. Bhupesh Chandra, Keshav Kant, Vijaya Vittala and S.V.Prabhu, Numerical investigation on the two phase refrigerant R134a flow through adiabatic capillary tubes - AIAA-2003-4191, Proceedings of the 36th AIAA Thermophysics Conference, Florida, 2003.

  14. Ventaka Ratna Rao and S.V.Prabhu, Effect of Multiple guide vanes on Pressure Loss Through Sharp 1800 Bends – Proceedings of the 16th International Symposium on Air Breathing Engines, Ohio, USA,2003.

  15. Venkata Ratna Rao and S.V.Prabhu, Effect of Single and Multiple Guide Vanes on Pressure Drop in a smooth Square Channel with Round Ended Sharp 1800 Bend – AIAA-2003-5961, Proceedings of the 1st International Energy Conversion Engineering Conference , Virginia, USA, 2003.

  16. Venkata Ratna Rao and S.V.Prabhu, Effect of Guide Vanes on Pressure Drop in a Rib Roughened Square Channel with a Sharp Cornered 1800 Bend - AIAA-2004-0692, Proceedings of 42nd AIAA Aerospace Sciences Meeting and Exhibit, Nevada, USA, 2004.

  17. Bhupesh Chandra and S.V.Prabhu, Two Phase Refrigerant Flow Through Adiabatic Capillary Tubes: Evaluation Of Two Phase Viscosity Correlations And Friction Factor Correlations On Homogenous Model Prediction For R22 And R134a - AIAA-2004-0168, Proceedings of 42nd AIAA Aerospace Sciences Meeting and Exhibit, Nevada, USA, 2004.

  18. Bhupesh Chandra and S.V.Prabhu, Assessment of Two Phase Viscosity and Friction Factor Correlations in Homogenous Model for Two Phase Refrigerant Flow (R12 And R600a) through Adiabatic Capillary Tubes – Proceedings of 2nd BSME-ASME International Conference on Thermal Engineering, Dhaka, Bangladesh, Jan 2004.

  19. Sardeshpande V. R., Srinivasan, V., Arun, K, Prabhu, S.V., and Vedula, R. P. Influence Of Orientation Angle On The Pressure Distribution Downstream Of A High Aspect Ratio Backward Facing Step In The Presence Of Rotation – AIAA-2004-2387, Proceedings of 37th AIAA Thermophysics Conference, Portland, Jul 2004.

  20. Arun, K., Prabhu, S.V. and Vedula, R.P., Effect of Channel Orientation, Rib Pitch to Height Ratio And Arrangement of Ribs on the Heat Transfer Augmentation in a Rotating Square Channel with Ribs on Two Opposite Surfaces- Proceedings of 2nd International Energy Conversion Engineering Conference, Rhode Island, Aug 2004.

  21. K.Arun, S.V.Prabhu and R.P.Vedula, Effect of Channel Aspect Ratio, Orientation angle, Rib pitch to height ratio and arrangement of Ribs on Friction Factor and Heat Transfer in a Rib Roughened Rotating Square Channel with Ribs on Two Opposite walls. – AIAA-2005-578, Proceedings of 43rd AIAA Aerospace Sciences Meeting and Exhibit Reno, Nevada, Jan 2005.

  22. Vishal D.Sardeshpande, K.Arun, S.V.Prabhu and R.P.Vedula, Effect of Aspect Ratio, Channel Orientation and Rib Pitch to Height Ratio on pressure drop characteristics in a in a Rotating Channel with Ribs on one wall – AIAA-2005-577, Proceedings of 43rd AIAA Aerospace Sciences Meeting and Exhibit Reno, Nevada, Jan 2005

  23. K. Arun, S.V.Prabhu and R.P.Vedula, Effect of Channel Orientation, Rib Pitch to Height Ratio and number of detached ribbed walls on pressure drop characteristics in a Rotating Square Channel – Proceedings of XVII ISABE 17th International Symposium on Air Breathing Engines, Munich, Germany, 2005.

  24. Nakod, P.M, S.V.Prabhu and R.P.Vedula, Heat Transfer Augmentation Between Impinging Circular Air Jet and Flat Plate using Finned Surfaces – Proceedings of ASME-ISHMT Conference, 2006, I.I.T., Guwahati.

  25. Arun, K., S.V.Prabhu and R.P.Vedula, Numerical analyis of effect of rotation, channlel orientation and rib spacing on the heat transfer in rotating single wall ribbed square channel, – Proceedings of ASME-ISHMT Conference, 2006, I.I.T., Guwahati.

  26. Subodh. D. Deodhar, S.V.Prabhu and Kannan N. Iyer, Experimental and numerical investigations on two phase flow through straight (adiabatic and heated) and helically coiled (adiabatic) capillary tubes – Proceedings of ASME-ISHMT Conference, 2006, I.I.T., Guwahati.

  27. Sri Harsha. V and S.V.Prabhu, “Local Heat Transfer Distribution in a square channel with profiled and continuous ribs using thin metal foil technique,” AIAA-2007-4035, Proceedings of 39th AIAA Thermophysics conference, Miami, 2007.

  28. Vadiraj Katti and S.V.Prabhu, “Correlations for local heat transfer distribution between smooth flat surface and impinging air jet from a circular straight pipe nozzle for different aspect ratios,” AIAA-2007-4390, Proceedings of 39th AIAA Thermophysics conference, Miami, 2007.

  29. Vadiraj Katti and S.V.Prabhu, “Heat transfer enhancements between flat surface with detached rib turbulators and impinging air jet from long pipe circular nozzle,” AIAA-2007-4395, Proceedings of 39th AIAA Thermophysics conference, Miami, 2007.

  30. Vadiraj Katti and S.V.Prabhu, “Effect of mounds under ribs in heat transfer augmentation between detached ribbed surface and circular jet impingement,” AIAA-2007-4037, Proceedings of 39th AIAA Thermophysics conference, Miami, 2007.

  31. Vadiraj Katti and S.V.Prabhu, “Analysis of heat transfer from flat surface due to circular jet impingement”, AIAA-2007-4799, Proceedings of 5th International Energy Conversion Engineering Conference and Exhibit (IECEC),Missouri, 2007.

  32. Kamoji, M.A., Kedare, S.B., and Prabhu, S.V., “Experimental Investigations on modified Savonius rotor,” AIAA-2007-4063, Proceedings of 25th AIAA Applied Aerodynamics Conference, Miami, 2007.

  33. Kamoji, M.A., Kedare, S.B., and Prabhu, S.V., “Wind tunnel tests on Single stage helical Savonius rotor,” AIAA-2007-4710, Proceedings of 5th AIAA International Energy Conversion Engineering Conference and Exhibit, St. Louis, Missouri, 2007.

  34. Arun, K, S.V.Prabhu and R.P.Vedula, “Effect of rib shape, channel rotation and orientation on friction factor in a square channel with profiled ribs,” AIAA-2007-4036, Proceedings of 39th AIAA Thermophysics conference, Miami, 2007.

  35. Abhishek Gupta, S.V.Prabhu and R.P.Vedula, “Local Heat Transfer distribution in a square channel with broken and continuous ribs using thin metal foil technique,” AIAA-2007-3902, Proceedings of 39th AIAA Thermophysics conference, Miami, 2007.

  36. Arun, K, Akhilesh. M, Narendr. M., and S.V.Prabhu, “Effect of rotation, channel orientation, rib pitch to height ratio on friction factor in a rotating channel with broken ribs,” Proceedings of National Conference on Fluid Mechanics and Fluid Power, I.I.T., Bombay, Mumbai, 2006.

  37. Pawan Kumar, Lokesh Meena, U.S.Powle and S.V.Prabhu, Experimental and numerical investigations on conical flowmeter in comparison with orificemeter, Proceedings of National Conference on Fluid Mechanics and Fluid Power, I.I.T., Bombay, Mumbai, 2006.

  38. Kamoji, M.A., S.B.Kedare and S.V.Prabhu, Experimental Investigations on the on the performance of conventional Savonius rotor under static and dynamic conditions, Proceedings of National Conference on Fluid Mechanics and Fluid Power, I.I.T., Bombay, Mumbai, 2006.

  39. Kamoji, M.A., S.B.Kedare and S.V.Prabhu, Experimental Investigations on the effect of gap ratio and end tip condition on the static torque in a conventional Savonius rotor, Proceedings of National Conference on Energy, I.I.T., Bombay, Mumbai, 2006.

  40. Vadiraj Katti and S.V.Prabhu, “Local heat transfer distribution for confined multiple circular jets with spent air cross flow”, Proceedings of 19th National and 8th ASME-ISHMT Conference, Hyderabad (India), 2008.

  41. Vadiraj Katti and S.V.Prabhu “Influence of Streamwise Pitch on Local Heat Transfer Distribution due to Confined Multiple Jets with Spent Air Exiting in Two opposite directions”, AIAA-2008-4127, Proceedings of 40th AIAA Thermophysics conference, Washington, 2008.

  42. Vadiraj Katti and S.V.Prabhu “Influence of Spanwise Pitch on Local Heat Transfer Distribution due to Confined Multiple Jets with Spent Air Exiting in Two opposite Directions,” AIAA-2008-4126, Proceedings of 40th AIAA Thermophysics conference, Washington, 2008.

  43. Vadiraj Katti and S.V.Prabhu, “ Influence of Spanwise Pitch on the Local Heat Transfer Distribution due to Multiple Circular Jets with Spent Air Exiting in One Direction,” AIAA-2008-4113, Proceedings of 40th AIAA Thermophysics conference, Washington, 2008.

  44. Vadiraj Katti and S.V.Prabhu, “Influence of Streamwise Pitch on the Local Heat Transfer Distribution due to Multiple Circular Jets with Spent Air Exiting in One Direction,” AIAA-2008-4114, Proceedings of 40th AIAA Thermophysics conference, Washington, 2008.

  45. Vadiraj Katti and S.V.Prabhu, “Local Heat Transfer Distribution between Smooth Flat Surface and Impinging Air Jet from a Circular Nozzle at Low Reynolds Number,” AIAA-2008-5727, Proceedings of 6th International Energy Conversion Engineering Conference (IECEC), Cleveland, 2008.

  46. Vadiraj Katti and S.V.Prabhu, “Local Heat Transfer Distribution from a Row of Impinging Jets to a Cylindrical Concave Surface,” AIAA-2008-5725, Proceedings of 6th International Energy Conversion Engineering Conference (IECEC), Cleveland, 2008.

  47. Puneet Gulati, V. Katti and S.V.Prabhu, “Influence of the Shape of the Nozzle on Local Heat Transfer Distribution between Smooth Flat Surface and Impinging Air Jet,” AIAA-2008-4130, Proceedings of 40th AIAA Thermophysics conference, Washington, 2008.

  48. Puneet Gulati, and S.V.Prabhu, “Influence of the Shape of the Nozzle on Local Heat Transfer Distribution between Smooth Flat Surface and Impinging Air Jet,” AIAA-2008-4131, Proceedings of 40th AIAA Thermophysics conference, Washington, 2008.

  49. Indi Amaey, Sri Harsha, Arun. K., S.V.Prabhu and R.P.Vedula, “Influence of orthogonal rotation and orientation on the heat transfer characteristics in a square channel with 60 V-broken ribs and 60 delta wing vortex generators,” AIAA-2008-3808, Proceedings of 40th AIAA Thermophysics conference, Washington, 2008.

  50. Amaey Indi and S.V. Prabhu, “Effect of asymmetric heating on local heat transfer distributions in a pin fin channel,” AIAA-2008-4115, Proceedings of 40th AIAA Thermophysics conference, Washington, 2008.

  51. Ghosh P, Kamoji, M.A., S.B.Kedare and S.V.Prabhu, “Model testing of single and three stage modified Savonius rotors and viability study of Savonius pump rotor systems,” AIAA-2008-5612, Proceedings of 6th International Energy Conversion Engineering Conference (IECEC), Cleveland, 2008.

  52. Amaey Indi and S.V. Prabhu, “Effect of asymmetric heating on local heat transfer distributions in a pin fin channel,” AIAA-2008-4115, Proceedings of 40th AIAA Thermophysics conference, Washington, 2008.

  53. Anirudha Dhananjay Ambekar, P K. BabuRajan, S. V. Prabhu and K. N. Iyer, “Design and Development of Experimental Facility for the Measurement of Heat Transfer and Pressure Drop in Condensers and Evaporators,” Proceedings of 12th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-12)

  54. Sudheer S and S.V.Prabhu, Measurement of emissivity of small diameter open pool fires using infrared thermography, Proceedings of the 20th National and 9th International ISHMT-ASME Heat and Mass Transfer Conference January 4-6, 2010, Mumbai, India

  55. Arun K, Narendra Meena, Akhilesh Meena and S.V. Prabhu, Effect of Rotation, Channel Orientation, Rib Pitch to Height Ratio on Friction Factor in a Rotating Channel with broken ribs, Proc. 3rd International and 33rd National FMFP Conference, Bombay, 2006.

  56. G. Sultania, SV Prabhu, A. Agrawal , An experimental investigation of slip flow of rarefied gases through a tube, Proc. 3rd International and 33rd National FMFP Conference, Bombay, 2006.

  57. A Gupta, SV Prabhu, RP Vedula, Local heat transfer distribution in a smooth and rib roughened square channel, Proc. 3rd International and 33rd National FMFP Conference, Bombay, 2006.

  58. Baburajan. P. K., Gupta. S. K., Prabhul K. and Prabhu. S.V., Measurement of local heat transfer coefficient in subcooled boiling in horizontal channels under LPLF conditions using thermal infrared imaging, Proc. 4th International and 37th National FMFP Conference, Chennai, 2010.

  59. Baburajan. P. K., Gupta. S. K., Prabhul K. and Prabhu. S.V., Experimental investigations on critical heat flux and pressure drop in a horizontal channel for low pressure low flow (LPLF) condition, Proc. 4th International and 37th National FMFP Conference, Chennai, 2010.

  60. Lokendra Kumar, Manjunath, B.S. and Prabhu, S.V., Analytical investigation on the melting of low prandtl number phase change materials in a square enclosure under constant wall temperature, Proc. 4th International and 37th National FMFP Conference, Chennai, 2010.

  61. Vadiraj Katti and S.V.Prabhu Local Heat Transfer Distribution From A Row Of Impinging Jets To A Cylindrical Concave Surface, , Proc. 4th International and 37th National FMFP Conference, Chennai, 2010.

  62. Vadiraj Katti and S.V.Prabhu Local Heat Transfer Distribution Between Smooth Flat Surface And Impinging Air Jet From A Circular Nozzle At Low Reynolds Numbers, Proc. 4th International and 37th National FMFP Conference, Chennai, 2010.

  63. Lokendra Kumar, Manjunath B.S. and Prabhu S.V., Analytical investigation on the melting of low prandtl number phase change materials in a square enclosure under constant wall temperature, Proceedings of the 37th International & 4th National Conference on Fluid Mechanics and Fluid Power, December 16-18, 2010, IIT Madras, Chennai, India

  64. P.K.Baburajan, Govind Singh Bisht, S.K.Gupta and S.V.Prabhu Experimental investigations on critical heat flux in a horizontal channel for low pressure low flow (LPLF) condition, Proceedings of the 21th National & 10th ISHMT-ASME Heat and Mass Transfer Conference, December 27-30, 2011, IIT Madras, Chennai, India.

  65. P.K.Baburajan, Govind Singh Bisht, S.K.Gupta and S.V.Prabhu, Measurement of subcooled boiling pressure drop and local heat transfer coefficient in horizontal channels under LPLF conditions, The 14th International Topical Meeting on Nuclear Reactor Thermal hydraulics, NURETH-14, Toronto, Ontario, Canada, September 25-30, 2011

  66. Lokendra Kumar, B.S. Manjunath, R.J.Patel, S.G.Markandeya, R.G. Agrawal, Ashish Agrawal, Y.Kashyap, P.S.Sarkar, Amar Sinha, K.N.Iyer and S.V.Prabhu, Experimental Investigations on Melting of Lead using neutron radiography, International Congress on Computational Mechanics and Simulation (ICCMS), IIT Hyderabad, 10-12 December 2012

  67. S. Sudheer and S.V. Prabhu, Characterization of Hexane Pool Fires using Infrared Thermography, 8th The Asia Pacific Conference on Combustion, Dec 2010, Hyderabad India.

  68. S. Desai, S. Sudheer, S.V. Prabhu, Fire dynamic simulations and physical experiments on gasoline open pool fires, 8th The Asia Pacific Conference on Combustion, Dec 2010, Hyderabad India.

  69. Venugopal, A., Agrawal, A., and Prabhu, S.V., Analysis of vortex flowmeter signal with empirical mode decomposition and autocorrelation function, presented at IUTAM Symposium on Bluff Body Flows, Indian Institute of Technology, Kanpur, 12-16 December 2011.

  70. Venugopal, A., Agrawal, A., and Prabhu, S.V., Comparison of piezo-sensor and differential wall pressure sensor for vortex flowmeter application, presented at 11th Asian International Conference on Fluid Machinery, Indian Institute of Technology, Chennai, 21-23 November 2011.

  71. S. Sudheer and S.V. Prabhu, Thermal Interaction between a Circular Pipe and Diesel Pool Fire, International Mechanical Engineering Congress and Exposition, 2012, Houston, Texas

  72. Venugopal, A., Agrawal, A., and Prabhu, S.V., Vortex cross correlation flowmeter, presented at Towards Smarter and Greener Flow Measurement and Control, FCRI Global Conference and Exhibition, Flow Control Research Institute, Palakkad, 18-20 January 2012.

  73. Venugopal, A., Agrawal, A., and Prabhu, S.V., Installation effects on the performance of vortex flowmeter with piezo-sensor, presented at Towards Smarter and Greener Flow Measurement and Control, FCRI Global Conference and Exhibition, Flow Control Research Institute, Palakkad, 18-20 January 2012.

  74. Kishore, B., Venugopal, A., and Prabhu, S.V. Study on Effects of Wafer Cone Design and Presence of Upstream Pipe Bends on the Performance of Wafer conical Flowmeter, presented at Towards Smarter and Greener Flow Measurement and Control, FCRI Global Conference and Exhibition, Flow Control Research Institute, Palakkad, 18-20 January 2012.

  75. Venugopal, A., Amit Agrawal and S. V. Prabhu. “Flow visualization studies on trapezoidal bluff for vortex flowmeter application”. XX IMEKO World Congress, Busan, Republic of Korea, 9-14 September 2012.

  76. Ankur Sahai, S. V. Prabhu and Arindrajit Chowdhury Oxy-Coal Combustion in a Fixed Bed Reactor, 9th Asia-Pacific Conference on Combustion, Gyeongju Hilton, Gyeongju, Korea, May 2013.

  77. Venugopal, A., Amit Agrawal and S. V. Prabhu. “Investigation on flow around cylinder with parallel slit in a circular pipe using flow visualization approach”. 66th Annual Meeting of the American Physical Society's Division of Fluid Dynamics (DFD), 24–26 November 2013, Pittsburgh, United States

  78. Amit Agrawal, Venugopal, A., and S. V. Prabhu. “Spanwise correlation in the wake of circular cylinder and normal plate placed inside a pipe”. 66th Annual Meeting of the American Physical Society's Division of Fluid Dynamics (DFD), 24–26 November 2013, Pittsburgh, United States.

  79. Lavish O., Venugopal, A., Amit Agrawal and S.V. Prabhu, “Influence of after body shape on the performance of blunt shaped bodies as vortex shedders". ICFMA 2013: International Conference on Fluid Mechanics and Application, 7-8 Oct 2013 Paris, France.

  80. Venugopal, A., Amit Agrawal and S. V. Prabhu. “Flow over a circular cylinder Placed Inside a Pipe”. 14th European Turbulence Conference, ENS Lyon France, 1-4 September 2013.

  81. Vijaykumar Hindasageri, R.P. Vedula, and S.V. Prabhu, Heat transfer distribution of swirling flame jet impinging on a flat plate using twisted tapes, 41st International conference on Fluid Mechanics and Fluid Power held during Dec 12-14, 2014, at I.I.T., Kanpur.

  82. Vijaykumar Hindasageri, R.P. Vedula, and S.V. Prabhu, Nusselt number and effectiveness distribution for three interacting methane –air premixed impinging flame jets, 41st International conference on Fluid Mechanics and Fluid Power held during Dec 12-14, 2014, at I.I.T., Kanpur.

  83. Hardik B. K., P.K. Baburajan and S.V. Prabhu, Measurement of Local Heat Transfer Coefficient in Single Phase Flow through Helically Coiled Tubes, 41st International conference on Fluid Mechanics and Fluid Power held during Dec 12-14, 2014, at I.I.T., Kanpur.

  84. Manish Jain, Benny John, K.N. Iyer and S.V. Prabhu, Experimental Investigation of the full cone pressure swirl spray nozzle for Containment Spray System of Indian Pressurized Heavy Water Reactor, 41st International conference on Fluid Mechanics and Fluid Power held during Dec 12-14, 2014, at I.I.T., Kanpur.

  85. Manish Jain, Benny John, K.N. Iyer and S.V. Prabhu, Experimental Investigation of the full cone pressure swirl spray nozzle for Containment Spray System of Indian Pressurized Heavy Water Reactor, 41st International conference on Fluid Mechanics and Fluid Power held during Dec 12-14, 2014, at I.I.T., Kanpur.

  86. Surfarazhussain. S. Halkarni, Arunkumar Sridharan and S.V. Prabhu, Effect of inserts on pressure drop in packed bed of spheres, 41st International conference on Fluid Mechanics and Fluid Power held during Dec 12-14, 2014, at I.I.T., Kanpur.

  87. Vimal Patel, T.I.Eldho and S.V. Prabhu, Performance enhancement of savonius hydrokinetic turbine by flow passage, 41st International conference on Fluid Mechanics and Fluid Power held during Dec 12-14, 2014, at I.I.T., Kanpur.

  88. Ravish Vinze, S. Chandel, M.D. Limaye and S.V. Prabhu, Influence of Nozzle Shape and Jet Exit Temperature on Heat Transfer Distribution between a Flat Plate and Impinging Air Jets, 41st International conference on Fluid Mechanics and Fluid Power held during Dec 12-14, 2013, at I.I.T., Kanpur.

  89. Vinay C Raj and S.V.Prabhu, Measurement of geometric and radiative properties of heptane pool fire, 41st International conference on Fluid Mechanics and Fluid Power held during Dec 12-14, 2014, at I.I.T., Kanpur.

  90. Surfarazhussain S Halkarni, SV Prabhu, Arunkumar Sirdharan, (2014), Influence of inserts on pressure drop in packed beds, 5th International 41st National conference on Fluid Mechanics and Fluid Power, IIT Kanpur, India

  91. Surfarazhussain S Halkarni, SV Prabhu, Arunkumar Sirdharan (2015), Measurement of Volumetric Heat Transfer Coefficient for Water Flowing through packed bed of stainless steel spheres, 1st International ISHMT-ASTFE Heat and Mass Transfer Conference IHMTC2015, 23rd National Heat and Mass Transfer Conference, VSSC ISRO, Thiruvananthapuram, India

  92. Surfarazhussain S Halkarni, SV Prabhu, Arunkumar Sirdharan (2015), Investigation of Pressure drop for Flow through a packed bed of spheres in Converging and diverging Ducts, 1st International ISHMT-ASTFE Heat and Mass Transfer Conference IHMTC2015, 23rd National Heat and Mass Transfer Conference, VSSC ISRO, Thiruvananthapuram, India

  93. BK Hardik, PK Baburajan, SV Prabhu, (2014), Measurement of Local Heat Transfer Coefficient in Single Phase Flow through Helically Coiled Tubes, 5th International 41st National conference on Fluid Mechanics and Fluid Power, IIT Kanpur, India

  94. Ravish vinze, S. Chandel, M.D. Limaye and S.V. Prabhu. “Influence of Nozzle Shape and Jet Exit Temperature on Heat Transfer Distribution between a Flat Plate and Impinging Air Jets”, Presented FMFP international Conference, Dec- 2014.

  95. BK Hardik, SV Prabhu, (2015), Measurement of Local Heat Transfer Distribution and Pressure Drop in Low Pressure Flow Boiling System, 23rd National Heat and Mass Transfer Conference 1st International ISHMT-ASTFE Heat and Mass Transfer Conference IHMTC2015, VSSC ISRO, Thiruvananthapuram, India

  96. Ravish vinze, S. Chandel, M.D. Limaye and S.V. Prabhu. “Effect of nozzle pressure ratios and flow structure on heat transfer due impingement of under expanded jets”, Presented in ISHMT, LPSC, Dec-2015.

  97. Ravish vinze, S. Chandel, M.D. Limaye and S.V. Prabhu. “Effect of nozzle configuration on heat transfer on impinging compressible air jet on a smooth plate”, Presented in ISHMT, LPSC, Dec-2015.


Refereed National Conferences

Conference Proceedings

  1. Ravi, S.V.Prabhu and R.P.Vedula, Pressure Drop Characteristics in a Rotating Square Channel with Rib Roughening Elements – Proceedings of the National Conference on Fluid Mechanics and Fluid Power Conference, Hyderabad, India, 1994.

  2. S.V.Prabhu and R.P.Vedula, Pressure Drop Characteristics in a Rotating Smooth Square Channel with a Sharp 1800 Bend – Proceedings of the National Conference on Fluid Mechanics and Fluid Power Conference, Madras, India, 1995.

  3. Jitumoni Deka and S.V.Prabhu, Pressure Drop Characteristics in a square Channel with Ribs on Two Opposite Surfaces – Proceedings of the National Conference On Fluid Mechanics And Fluid Power, Palghat, India, 2000.

  4. Nilesh Deshpande, Rishi Dev Singh, S.V.Prabhu and U.S.Powle, “A Computational Study of Flow Through an Orifice Plate,” – Proceedings of the National Conference on Fluid Mechanics and Fluid Power, Surathkal, India, 2003.

  5. Nilesh V. Deshpande, S.V.Prabhu, R.P.Vedula and K.N.Iyer, “ Experimental Investigation on the Calibration and Alignment Insensitivity for Manifolded Cylindrical Probes,” – Proceedings of the National Conference on Fluid Mechanics and Fluid Power, Jadavpur University, India, 2004.

  6. Seshagiri Vencherla Rao, S.V.Prabhu and U.S.Powle, “Local Pressure Drop Distribution in a S-Shaped Diffuser with a Turning Angle of 90o for Different Area Ratios,” - Proceedings of the National Conference on Fluid Mechanics and Fluid Power, Jadavpur University, India, 2004.

  7. Deshpande N. V., Vedula R. P., Prabhu S. V, and Limaye M. D. “Experimental and Numerical Study of Water Twister Energy Absorbing System.” Proceedings of the National Confence on Fluid Mechanics and Fluid Power, Osmanabad, India, 2005.

  8. Venugopal, A., Agrawal, A., and Prabhu, S.V., Numerical Investigations on the Vortex Shedding of a Circular Cylinder as applicable to Vortex Flowmeter, Proceedings of the 34th National Conference on Fluid Mechanics and Fluid Power, Ranchi, India, December 10-12, 2007.

  9. Tejas Chafekar, Ranjit Kumar, Nishant Nayan, Vadiraj Katti and S.V.Prabhu, “Pressure Distribution on a semi-circular concave surface impinged by a single row of circular jets” Proceedings of the 35th National Conference on Fluid Mechanics and Fluid Power, Bangalore, 2008.

  10. Tejas Chafekar, Ranjit Kumar, Nishant Nayan, Vadiraj Katti and S.V.Prabhu, “Flow visualization studies on submerged free and impinging jets” Proceedings of the 35th National Conference on Fluid Mechanics and Fluid Power, Bangalore, 2008.

  11. Amar S. Chougale, S. Prakash, U.S. Powle and S.V. Prabhu, Experimental investigation on Multihole Self-Averaging Pitot Probe, 36th National FMFP conference, Pune, 2009.

  12. P.K.Baburajan, Govind Singh Bisht, S.K.Gupta and S.V.Prabhu, Influence of stiffness of the system on the chf for horizontal tubes under LPLF conditions, ICAER 2011, IIT Bombay, Mumbai India.

  13. Lokendra Kumar, Manjunath B.S., Agarwal R.G., Markandeya S.G. and Prabhu S.V., Experimental investigations on melting of indium and lead in a rectangular enclosure with constant heat flux boundary condition, 4th National Conference on Nuclear Reactor Technology (NRT-4), March 4-6, 2011, Mumbai

  14. S. Sudheer and S.V. Prabhu, Behavior of small lumped bodies immersed in diesel pool fires, Conference on Fire Science and Technology Research and its implementation, 2011, CBRI, Roorkee, India

  15. Sumit Shivani, Saket Singh, S. Sudheer and S.V.Prabhu, Influence of external heat flux and coating thickness of intumescent coatings on the fire resistance to stainless steel, Conference on Fire Science and Technology Research and its implementation, 2011, CBRI, Roorkee, India

  16. Gajendra Kumar, A. Venugopal and S.V.Prabhu, Experimental Investigations on Multi-hole Orificemeters under Fully Developed Flow Conditions, Proceedings of the Thirty Ninth National Conference on Fluid Mechanics and Fluid Power, December 13-15, 2012, SVNIT Surat, Gujarat, India

  17. Vijaykumar H., R.P.Vedula and S.V.Prabhu, Blowoff limits of methane-air premixed flame stabilised on tube and perforated plate burners, Proceedings of the Thirty Ninth National Conference on Fluid Mechanics and Fluid Power, December 13-15, 2012, SVNIT Surat, Gujarat, India

  18. Vimal Patel, AshwinAhir, T.I.Eldho and S.V. Prabhu, Experimental investigations on the performance of darrieus straight blade turbine for hydrodynamic applications, Proceedings of the Thirty Ninth National Conference on Fluid Mechanics and Fluid Power, December 13-15, 2012, SVNIT Surat, Gujarat, India.

  19. Deep Agarwal, Ashish Mishra, Vijaykumar H, R P Vedula and S V Prabhu, Heat Transfer Distribution Of Perforated Plate Burner Flames Impinging On A Flat Plate, Proceedings of the fourth National Conference on Fluid Mechanics and Fluid Power, December 12-14, 2013, NIT Hamirpur, India.

  20. Baburajan P. K.,, Govind Singh Bisht ,Avinash J Gaikwad,, S. V. Prabhu, “Experimental Study On CHF In Horizontal Channels Under Flow Decay Conditions” 40th National conference on Fluid Mechanics and Fluid Power held during Dec 12-14, 2013, at N.I.T., Hamirpur.

  21. BK Hardik, PK Baburajan, SV Prabhu, (2015), "Local Heat Transfer in Straight Horizontal Circular Tubes, Mechanical Engineering Graduate Research Symposium (MEGRES 2015), IIT Bombay, India