A. Mishra, M. Dinachandra, A. Alankar, Crystal plasticity analyses around grain boundaries using a dislocation dynamics finite element model, Journal of Multiscale Modeling, Accepted, , 2023, ,

Ajay V, Jignesh Nakrani, Neeraj Mishra, Amber Shrivastava, Anisotropic fatigue crack propagation in wire arc additively manufactured 316L stainless steel, International Journal of Fatigue, 177, , 2023, https://doi.org/10.1016/j.ijfatigue.2023.107976, 107976

Ajay V, Jignesh Nakrani, Neeraj Mishra, Amber Shrivastava, Fatigue crack growth behavior of SS316L deposition from wire arc additive manufacturing, Manufacturing Letters, 35, Supplement, 2023, https://doi.org/10.1016/j.mfglet.2023.08.060, 658-664

Ashish Dhole, Anirban Patra, Rohit Kumar Gupta, Amol A Gokhale, I Samajdar, Surface Hardening through Oxygen Diffusion in Niobium: The Defining Role of Stress Inhomogeneity in Tensile Embrittlement, Materials Science and Engineering A, , 3, 2023, https://doi.org/10.1016/j.msea.2023.144883,

Berger P, Shah DS, Taylan O, Slane J, De Corte R, Scheys L, Vandenneucker H, Influence of total knee replacement constraint on frontal plane stability: an ex vivo investigation within a single implant line, Archives of Orthopaedic and Trauma Surgery, 143, , 2023, 10.1007/s00402-022-04534-x, 2165-2173

Chitralekha Dey, Amol A. Gokhale, Shiba N Sahu, Shock Transmission and Amplification / Mitigation in Aluminium Foams, Mechanics of Advanced Materials and Structures, , 5, 2023, https://doi.org/10.1080/15376494.2023.2217159,

G. S. Thoppil, J. F. Nie, A. Alankar, Bayesian approach for inferable machine learning models of Process–Structure–Property Linkages in Complex Concentrated Alloys, Journal of Alloys and Compounds, 967, , 2023, , 171595

G.S. Thoppil, J.F. Nie, A. Alankar, Hierarchical Machine Learning Based Structure–property Correlations for As–cast Complex Concentrated Alloys, Computational Materials Science, 216, , 2023, , 111855

Gotawala, N., & Shrivastava, A., X-ray tomography and characterization of dissimilar interface revealing the interplay of intermetallics, interlocking, and voids on joint strength of Al6061 and AZ31Mg dissimilar friction stir welds, CIRP Journal of Manufacturing Science and Technology, 44, , 2023, https://doi.org/10.1016/j.cirpj.2023.05.002, 70-81

Jignesh Nakrani, Wenyi Yan, Amber Shrivastava, Effect of notch location on fatigue crack growth behavior for inhomogeneous material domains in friction stir welded magnesium alloy, International Journal of Fatigue, 177, , 2023, https://doi.org/10.1016/j.ijfatigue.2023.107956, 107956

Kumar, A., Mehtani, H.K., Shrivastava, A., Mishra, S., Samajdar, I., & Narasimhan, K., Failure Mechanism during Incremental Sheet Forming of a Commercial Purity Aluminum Alloy, Engineering Failure Analysis, 146, , 2023, https://doi.org/10.1016/j.engfailanal.2023.107090, 107090

Mishra, N.K., & Shrivastava, A., Improvement in strength and ductility of rotary friction welded Inconel 600 and stainless steel 316L with Cu interlayer, CIRP Journal of Manufacturing Science and Technology, 41, , 2023, https://doi.org/10.1016/j.cirpj.2022.12.006, 19-29

P. Kishore, Tanul Singh, R. Aher, A. Alankar, Workflow for fatigue life prediction of additive manufactured complex designs from powder bed fusion of Ti-6Al-4V, International Journal of Fatigue, Accepted, , 2023, ,

R. Chatterjee, S.V.S.N. Murty, A. Alankar, Evaluating the influence of deformation variables on dynamic recrystallization behavior using a crystal plasticity model, Modeling and Simulation in Materials Science and Engineering, , , 2023, , p. 045002

S. Ahmed, A. Alankar, V. Tathavadkar, K. Narasimhan, Investigation of Tensile Flow Behavior of Al-Mg Alloy at Warm Temperature: Constitutive Modelling and Microstructural Evolution, Metals and Materials International, Accepted, , 2023, ,

S. Ansari, A. Acharya, A. Alankar, An Experimentally Informed Continuum Grain Boundary Model, Mathematics and Mechanics of Solids, Accepted, , 2023, ,

S. Chandra, A. Alankar, M. K. Samalc, V. M. Chavan, Insights into fracture behavior of Ni-based superalloy single crystals: An atomistic investigation, Journal of Alloys and Compounds, , , 2023, , p. 169938

S. Rawat, A. Alankar, Atomistic Analyses of Fracture in α, β and Lamellar α-β Ti Single Crystals, Journal of the Mechanics and Physics of Solids, 177, , 2023, , p. 1053132023

S. S. Pandurangi, D. S. Hall, C. P. Grey, V. S. Deshpande and N. A. Fleck, Chemomechanical analysis of lithiation/delithiation of Ni-rich single crystals, Journal of the Electrochemical Society, 170, 5, 2023, 10.1149/1945-7111/acd47e, 050531

Srinivasa Rao Nandam, A Venugopal Rao, Amol A Gokhale, Suhas S Joshi, Laser Surface Remelting in Single-Crystal Nickel-based Superalloy using a Continuous Wave Fiber Laser, Lasers in Manufacturing and Materials Processing, , , 2023, https://doi.org/10.1007/s40516-023-00219-4,

Srinivasa Rao Nandam, A Venugopal Rao, Amol A. Gokhale and Suhas S Joshi, Laser Surface Modification of Single-Crystal Nickel-based Superalloy: Geometry, Microstructure, Crack Morphology, and Microhardness, Journal of Materials Engineering and Performance, , , 2023, 10.1007/s11665-023-08482-4,

Vishal G. Salunkhe, Ramchandra G. Desavale, S.M. Khot, and Nitesh P. Yelve, A novel incipient fault detection technique for roller bearing using deep independent component analysis and variational modal decomposition, ASME Journal of Tribology, 145, 7, 2023, DOI:10.1115/1.4056899, 074301

Vishal G. Salunkhe, Ramchandra G. Desavale, S.M. Khot, and Nitesh P. Yelve, Unbalance bearing fault identification using highly accurate Hilbert-Huang transform approach, ASME Journal of Nondestructive Evaluation, 6, 3, 2023, DOI:10.1115/1.4062929, 031005

Yuwaraj M. Ghugal, Eugenio Ruocco, Param D. Gajbhiye, Vishisht Bhaiya, and Nitesh P. Yelve, Stress analysis of laminated and sandwich beams subjected to concentrated load by using quasi-two-dimensional theory, International Journal of Computational Materials Science and Engineering, , , 2023, DOI:10.1142/S204768412350046X,

Amit Kumar Singh , Yasham Mundada , Priyanshu Bajaj, Markus B. Wilms, Jeet P Patil, Sushil Kumar Mishra, Eric A. Jäglec, Amit Arora, Investigation of temperature distribution and solidification morphology in multilayered directed energy deposition of Al-0.5Sc-0.5Si alloy, nternational Journal of Heat and Mass Transfer, 186, 122492, 2022, https://doi.org/10.1016/j.ijheatmasstransfer.2021.122492,

A. Ojha, M. Anas, A. Ranjan, P. Joshi, M. K. Verma, Helicity segregation by Ekman pumping in laminar rotating flows with gravity orthogonal to rotatio, Physical Review Fluids, 7, 034801 , 2022, ,

Abhishek Kumar, A.K. Singh, Amber Shrivastava, Sushil Mishra, K. Narasimhan, Shear modified Lemaitre damage model for fracture prediction during incremental sheet forming., International Journal of Solids and Structures, 252, 111822, 2022, https://doi.org/10.1016/j.ijsolstr.2022.111822,

Abhishek Kumar, Amber Shrivastava, K. Narasimhan, Sushil Mishra, Microstructure and texture evolution during incremental sheet forming of AA1050 alloy., Journal of Materials Science, 57, , 2022, https://doi.org/10.1007/s10853-022-07036-8, 6385-6398

Akshay V. Kolekar, Nitesh P. Yelve, and S.M. Khot, Lamb wave-based real-time damage location system with integrated internet of things, Materials Today: Proceedings, 57, 2, 2022, DOI:10.1016/j.matpr.2022.01.247, 469–473

Ashish Dhole, Amrita Bhattacharya, René de Kloe, Rohit Kumar Gupta, Amol A. Gokhale, and I. Samajdar, Orientation Dependent Interface Morphology and Oxide Stability in a Commercial Niobium Alloy: Explaining Experimental Results with Density Functional Theory, Acta Materialia, , , 2022, https://doi.org/10.1016/j.actamat.2022.117793,

Awatef Khlifi, Aftab Ahmed, Brahim Mezghani, Pradeep Dixit, Fares Tounsi, Maryam Shojaei Baghini, Theoretical and numerical investigation of a new 3-axis SU-8 MEMS piezoresistive accelerometer, Microelectronics Journal, 128, , 2022, doi.org/10.1016/j.mejo.2022.105552, 105552

BVSS Bhardwaja, M. Nabian, B. Sharma, S. Choudhry, A. Alankar , Physics–Informed Machine Learning and Uncertainty Quantification for Mechanics of Heterogeneous Materials, Integrating Materials and Manufacturing Innovation, , , 2022, , 1-21

C. Xu*, A. J. Merryweather*, S. S. Pandurangi*, Z. Lun, D. S. Hall, V. S. Deshpande, N. A. Fleck, C. Schnedermann, A. Rao and C. P. Grey (*equal contribution), Operando visualisation of kinetically-induced lithium heterogeneities in single particle layered Ni-rich cathodes, Joule - Cell Press, 6, 11, 2022, 10.1016/j.joule.2022.09.008, 2535–2546

Chitralekha Dey, Shiba N Sahu, Kiran Akella and Amol A Gokhale, A micromechanical approach to predict quasi-static compression, indentation impact and shock loading behaviour of aluminium foams, Journal of Dynamic Behaviour of Materials, , , 2022, https://doi.org/10.1007/s40870-022-00336-9,

D. Peng, R. Jones, A. S.M. Ang, A. Michelson, V. Champagne, A. Birt, S. Pinches, S. Kundu, A. Alankar, R.K. Singh Raman, , Computing the durability of WAAM 18Ni 250 Maraging steel specimens, Fatigue and Fracture of Engineering Materials and Structures, In press, , 2022, ,

Dileep Kumar Mishra, Tarlochan Singh, Pradeep Dixit, Cathode shape prediction for uniform electrochemical dissolution of array tools for ECDM applications, Materials and Manufacturing Processes, 37, , 2022, https://doi.org/10.1080/10426914.2021.2001520,

Faeez Masurkar, Nitesh P. Yelve, and Peter Tse, Nondestructive testing of rails using nonlinear Rayleigh waves, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236, 15, 2022, DOI:10.1177/09544062221086179, 8527–8541

G. S. Thoppil and A. Alankar, Predicting the formation and stability of oxide perovskites by extracting underlying mechanisms using machine learning, Computational Materials Science, 211, , 2022, , 111506

Gaurav Kumar, Sumit Ghosh, Sakari Pallaspuro, Mahesh C. Somani, Jukka Kömi, Sushil K. Mishra, Amol A Gokhale, Fracture toughness characteristics of thermo-mechanically rolled direct quenched and partitioned steels, Materials Science and Engineering A, , , 2022, https://doi.org/10.1016/j.msea.2022.142788,

H. Hrishikesh and A. Alankar, On the interplay of elastic anisotropy and fracture toughness anisotropy in fracture of single and multiphase polycrystals, Engineering Fracture Mechanics, 273, October, 2022, , 108696

Harsh Pandey, Tarlochan Singh, Pradeep Dixit, Formation of high aspect ratio through-glass vias by the combination of Ultrasonic micromachining and copper electroplating, Journal of Manufacturing Processes, 82, , 2022, , 569-584

Julfekar Arab, Pradeep Dixit, Formation of macro-sized through-holes in glass using notch-shaped tubular electrodes in electrochemical discharge machining, Journal of Manufacturing Processes, 78, , 2022, 10.1016/j.jmapro.2022.03.052, 92-106

K. Gururaj, M. Saha, S. K. Maurya, R. Nama, A. Alankar, M. B. Ponnuchamy, K. G. Pradeep, On the correlative microscopy analyses of nano-twinned domains in 2 mol% zirconia alloyed yttrium tantalate thermal barrier material, Scripta Materialia, 212, , 2022, , 114584

Karan Pawar, Harsha S, Pradeep Dixit, Investigation of Cu-Sn-Cu Transient Liquid Phase bonding for microsystems packaging, Materials and Manufacturing Processes, , , 2022, https://doi.org/10.1080/10426914.2022.2105888, 1-11

M. Dinachandra, A. Alankar, Adaptive finite element modeling of phase-field fracture driven by hydrogen embrittlement, Computer Methods in Applied Mechanics and Engineering, 391, , 2022, , 114509

M. Dinachandra, A. Alankar, Static and dynamic modeling of functionally graded Euler-Bernoulli microbeams based on reformulated strain gradient elasticity theory using isogeometric analysis, Composite Structures, 280, , 2022, , 114923

Mahesh Thorat, Shiba N. Sahu, Viren Menezes, Amol A. Gokhale, Back-face-signature-monitored evaluation of foam-sandwich structures as shock mitigating materials, Journal of Materials Engineering and Performance, , , 2022, https://doi.org/10.1007/s11665-022-06906-1,

Nandam Srinivasa Rao, A Venugopal Rao, Amol A Gokhale and S S Joshi, Experimental Study on Laser Induced Surface Damage of a Single-Crystal Nickel-based Superalloy under CW Fiber Laser Scanning Process submitted to the Journal of Engineering Materials and Technology, Journal of Engineering Materials and Technology, , , 2022, ,

Neeraj Mishra, Amber Shrivastava, Microstructure and mechanical properties of rotary friction welded IN-600 and SS316L with Copper interlayer., TMS 2022 151st Annual Meeting & Exhibition Supplemental Proceedings, Springer, Cham., , 2022, , 1067-1076

Nikhil Gotawala, Amber Shrivastava, Microstructure and texture analysis of friction stir welded AZ31 Mg and Al 6061 joint., Magnesium Technology 2022, Springer, Cham., , 2022, https://doi.org/10.1007/978-3-030-92533-8_32, 191-196

Nikhil Gotawala, Neeraj Mishra, Amber Shrivastava, Microstructure and mechanical properties of friction stir deposited SS304., TMS 2022 151st Annual Meeting & Exhibition Supplemental Proceedings, Springer, Cham., , 2022, https://link.springer.com/chapter/10.1007/978-3-030-92381-5_24, 269-278

Nikhil Gotawala, Neeraj Mishra, Amber Shrivastava, Solid-state deposition of multilayer SS304 by friction stir metal deposition., Materials Letters, 314, 131881, 2022, https://doi.org/10.1016/j.matlet.2022.131881,

P. A. Davidson, O. Wong, J. Atkinson, A. Ranjan, Magnetically-driven flow in a liquid-metal battery, Physical Review Fluids, 7, 074701, 2022, ,

Pramod Kumar Malik, Anirban Guha and P. Seshu,, Topology Identification for Super-stable Tensegrity Structure from a Set of Given Number of Nodes in a Two-dimensional Space, Pramod Kumar Malik, Anirban Guha and P. Seshu, Mechanics Research Communications, Elsevier, 2022, v119, 103810., Topology Identification for Super-stable Tensegrity Structure from a Set of Given Number of Nodes in a Two-dimensional Space, , , 2022, 103810,

Priyaranjan Sharma, Pradeep Dixit, Investigation of Tool wear in alumina micromachining by multi-tip ECDM, Materials and Manufacturing Processes, 37, 3, 2022, https://doi.org/10.1080/10426914.2021.2006218, 342–348

R. Dadhich and A. Alankar, A Modular Spectral Solver for Crystal Plasticity, International Journal of Plasticity, , , 2022, , 103328

Robberecht J, Shah DS, Taylan O, Natsakis T, Vandeputte G, Vander Sloten J, Jonkers I, The role of medial ligaments and tibialis posterior in stabilising the medial longitudinal foot arch: A cadaveric gait simulator study, Foot and Ankle Surgery, 28, 7, 2022, 10.1016/j.fas.2021.12.005, 906-911

S. Chandra, A. Alankar, N. N. Kumar, M. K. Samal, V. M. Chavan, An atomistic analysis of the effect of grain boundary and the associated deformation mechanisms during plain strain compression of a Cu bicrystal, Computational Materials Science, 202, , 2022, , 110953

S. K. Maurya, S. Chandra, J. F. Nie, A. Alankar, Crack Mediated Dislocation Activities in Al/Ti Nanolayered Composites: An Atomistic Study, Modelling and Simulation in Materials Science and Engineering, Accepted, , 2022, ,

S. S. Pandurangi, A. Akerson, R. S. Elliott, T. J. Healey and N. Triantafyllidis, Nucleation of creases and folds in hyperelastic Solids is Not a Local Bifurcation, Journal of the Mechanics and Physics of Solids, 160, , 2022, 10.1016/j.jmps.2021.104749, 104749

S.F. Tikhov, K.R. Valeev, S.V. Cherepanova, V.I. Zaikovskii, A.N. Salanov, V.A. Sadykov, D.V. Dudina, O.I. Lomovsky, S.A. Petrov, O.L. Smorygo, A.A. Gokhale, Elimination of composition segregation in 33Al-45Cu-22Fe (at.%) powder by two-stage high-energy mechanical alloying, Materials, , , 2022, https://doi.org/10.3390/ma15062087,

Tarlochan Singh, Dileep Kumar Mishra, Pradeep Dixit, Effect of pulse frequency and duty cycle on electrochemical dissolution behavior of multi-tip array tool electrode for reusability in the ECDM process, Journal of Applied Electrochemistry, 52, , 2022, https://doi.org/10.1007/s10800-021-01662-x,

Tarlochan Singh, Julfekar Arab, Pradeep Dixit, A review on microhole formation in glass-based substrates by Electrochemical discharge drilling for MEMS applications, Machining Science and Technology, 26, , 2022, 10.1080/10910344.2022.2044857, 276-337

U. Tewary, D. Paul, H. K. Mehtani, S. Bhagavath, A. Alankar, G. Mohapatra, S. S Sahay, A. S. Panwar, S. Karagadde, I. Samajdar, The Origin of Graphite Morphology in Cast Iron, Acta Materialia, 226, , 2022, , 117660

Vishnu Kant Bajpai, Harsh Pandey, Tarlochan Singh, Pradeep Dixit, Ultrasonic-assisted surface roughening of glass substrate to improve adhesion of electroless nickel seed layer in microsystems packaging, Materials Letters, 317, , 2022, https://doi.org/10.1016/j.matlet.2022.132033,

Vishnukant Bajpai, Dileep Kumar Mishra, Pradeep Dixit, , Fabrication of Through-glass Vias (TGV) based 3D microstructures in Glass Substrate by a lithography-free process for MEMS applications, Applied Surface Science, 582, , 2022, https://doi.org/10.1016/j.apsusc.2022.152494, 152494

, Surface Gas Nitriding of Titanium (Ti–6Al–4V) Alloy, S Chakrabarty, SR Panda, JS Jha, SK Mishra, Advances in Mechanical Processing and Design, , , 2021, https://doi.org/10.1007/978-981-15-7779-6_51, 561-568

A Ranjan, P A Davidson, Columnar heat transport via advection induced by inertial waves, International Journal of Heat and Fluid Flow, 87, , 2021, https://doi.org/10.1016/j.ijheatfluidflow.2020.108703, 108703

G Shete, S Mishra, S Karagadde, A Srivastava, On the phenomena of partial crystallization of highly undercooled magnesium silicate molten droplets, Scientific Reports, 11, 1, 2021, https://doi.org/10.1038/s41598-021-93135-6, 1-14

Raj Desai, Anirban Guha, P Seshu, An appropriate biomechanical model of seated human subjects exposed to whole-body vibration, Raj Desai, Anirban Guha, P Seshu, Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 2021, 235(4):586-601., An appropriate biomechanical model of seated human subjects exposed to whole-body vibration,, , , 2021, ,

A Kumar, N Gotawala, S Mishra, A Shrivastava, Defects, microstructure and mechanical behaviour upon multi-pass friction stir processing of magnesium alloy with spiral tool path, CIRP Journal of Manufacturing Science and Technology, 32, , 2021, https://doi.org/10.1016/j.cirpj.2020.12.006, 170-178

Abhishek Kumar, Nikhil Gotawala, Sushil Mishra, Amber Shrivastava, Defects, microstructure and mechanical behaviour upon multi-pass friction stir processing of magnesium alloy with spiral tool path, CIRP Journal of Manufacturing Science and Technology, 32, , 2021, https://doi.org/10.1016/j.cirpj.2020.12.006, 170-178

Akshay Bhutada, Sunni Kumar, Dayalan Gunasegaram, Alankar Alankar, Machine Learning based Methods for Obtaining Correlations between Microstructures and Thermal Stresses, Metals, Accepted, , 2021, ,

AS Chauhan, JS Jha, S Telrandhe, V Srinivas, AA Gokhale, SK Mishra, Laser surface treatment of α-β titanium alloy to develop a β-rich phase with very high hardness, Journal of Materials Processing Technology , 288, , 2021, https://doi.org/10.1016/j.jmatprotec.2020.116873,

Dileep Kumar Mishra, Pradeep Dixit, Experimental investigation into tool wear behaviour of line-array tool electrode during the electrochemical discharge micromilling process, Journal of Manufacturing Processes, 72, 12, 2021, , 93-104

E. Martinez, A. Alankar, A. Caro, T. Jourdan, Relative relevance of mobility and driving force on edge dislocation climb by the vacancy mechanism, Computational Materials Science, , , 2021, , p. 110378.

Faeez Masurkar, Kim Ming Ng, Peter Tse, and Nitesh P. Yelve, Interrogating the health condition of rails using the narrowband Rayleigh waves emitted by an innovative design of non-contact laser transduction system, Structural Health Monitoring, 20, 5, 2021, DOI:10.1177/1475921720967600, 2678–2693

H Maharaja, S Mishra, P Patel, SK Mishra, JS Jha, Understanding the Deformation Micro-mechanism in Ti–6Al–4V Alloy U-Notched Specimen , Advances in Mechanical Processing and Design, , , 2021, https://doi.org/10.1007/978-981-15-7779-6_44, 499-505

Harindra Kumar Kannojia, and Pradeep Dixit, A comprehensive review of intermetallic compound growth and void formation in electrodeposited Cu-Sn Layers for microsystems packaging, Journal of Materials Science: Materials in Electronics, 32, , 2021, ,

JP Patil, M Paliwal, SK Mishra,, A Review on the Material Development and Corresponding Properties for Power Plant Applications, Materials Performance and Characterization, 11, 2, 2021, DOI: 10.1520/MPC20200173,

JP Patil, V Nandedkar, S Mishra, SK Saha, Transient thermal analysis of close pressure thermoforming process, Journal of Manufacturing Processes, 62, , 2021, https://doi.org/10.1016/j.jmapro.2020.12.057, 513-522

JP Patil, YS Gaikhe, V Nandedkar, S Mishra, Effect of Sheet Temperature on Thickness Distribution of the Thermoformed Hemispherical Dome, Advances in Mechanical Processing and Design, , , 2021, https://doi.org/10.1007/978-981-15-7779-6_42, 479-487

Julfekar Arab, Dileep Kumar Mishra, Pradeep Dixit, Measurement and analysis of the geometric characteristics of microholes and tool wear for varying tool-workpiece gaps in electrochemical discharge drilling, Measurement, 168, , 2021, , 108463

Julfekar Arab, Karan Pawar, Pradeep Dixit, Effect of tool-electrode material in through-hole formation using ECDM process, Materials and Manufacturing Processes, 39, , 2021, https://doi.org/10.1080/10426914.2021, 1-9

Microstructure and texture evolution of complete Mg-3Al-0.2 Ce alloy blanks upon multi-pass friction stir processing with spiral strategy, Microstructure and texture evolution of complete Mg-3Al-0.2 Ce alloy blanks upon multi-pass friction stir processing with spiral strategy, Materials Today Communications, 26, , 2021, https://doi.org/10.1016/j.mtcomm.2020.101850,

N. M. Jose, M. K. Samal, P. V. Durgaprasad, A. Alankar, B.K Dutta, Crystal plasticity modelling of neutron irradiation effects on the flow behaviour of neutron irradiated Zircaloy-4, SICE 2020 Proceedings, Structural Integrity Over Multiple Length Scales, , 2021, ,

Nakul D Ghate, Amber Shrivastava, Numerical and experimental investigation of complex surface topography evolution during laser surface modification with raster scan, Journal of Manufacturing Processes, 69, , 2021, , 368-377

Nakul D Ghate, Amber Shrivastava, Power spectral analysis of surface microtopography formed in CW Laser surface texturing, Procedia Manufacturing, 53, , 2021, https://doi.org/10.1016/j.promfg.2021.06.022, 197-203

Nikhil Gotawala, Abhishek Kumar. Sushil Mishra, Amber Shrivastava, Microstructure and texture evolution of complete Mg-3Al-0.2 Ce alloy blanks upon multi-pass friction stir processing with spiral strategy., Materials Today Communications, 26, , 2021, , 101850

Nikhil Gotawala, Amber Shrivastava, Analysis of Al 6061 and Mild Steel Joints from Rotary Friction Welding, TMS 2021 150th Annual Meeting & Exhibition Supplemental Proceedings, , , 2021, DOI https://doi.org/10.1007/978-3-030-65261-6_60, 669-678

Nikhil Gotawala, Amber Shrivastava, Effect of Diffusion on Intermetallics at Interface During Friction Stir Welding of Stainless Steel and Pure Titanium, Friction Stir Welding and Processing XI, , , 2021, , 135-146

Nikhil Gotawala, Amber Shrivastava, Investigation of interface microstructure and mechanical properties of rotatory friction welded dissimilar aluminum-steel joints, Materials Science and Engineering: A, , , 2021, https://doi.org/10.1016/j.msea.2021.141900, 141900

Nikhil Gotawala, Amber Shrivastava, Thermodynamics-based analysis of formation and growth of FeTi and β-Ti during friction stir welding of SS304 and pure titanium., Journal of Materials Science, 56, 34, 2021, , 19180-19198

Nitesh P. Yelve, Faeez Masurkar, and Peter Tse, Application of Rayleigh wave-based nonlinearity parameter to estimate the remnant useful life of fatigued thick Aluminum plates, ISSS Journal of Micro and Smart Systems, 10, , 2021, DOI:10.1007/s41683-021-00074-5, 161–178

Nitesh P. Yelve, Jovan C. Menezes, Shubhankar B. Das, and Bhavik M. Panchal, Augmentation of mapping and autonomous navigation for hexapod robots by using a visual inertial system, Journal of Physics: Conference Series, 1969, 1, 2021, DOI:10.1088/1742-6596/1969/1/012005, 012005

P Seth, JS Jha, A Alankar, SK Mishra, Alpha-case Formation in Ti–6Al–4V in a Different Oxidizing Environment and Its Effect on Tensile and Fatigue Crack Growth Behavior, Oxidation of Metals, , , 2021, https://doi.org/10.1007/s11085-021-10079-y, 1-19

P. Seth, J. Jha, A. Alankar, S. Mishra, α-case formation in Ti-6Al-4V in a different oxidizing envi- ronment and its effect on tensile and fatigue crack growth behavior, Oxidation of Metals, , , 2021, , p. 1

Priyaranjan Sharma, Julfekar Arab, Pradeep Dixit, Through-holes micromachining of alumina using a combined pulse-feed approach in ECDM, Materials and Manufacturing Processes, 36, , 2021, ,

R. Jones, D. Peng, C. Tang, R. Singh, S. Kundu, N. Matthews, A. Alankar, Computing the Fatigue Life of Cold Spray Repairs to Simulated Corrosion Damage, Materials, 14, 16, 2021, , 4451

Raj Desai, Anirban Guha and P. Seshu, Multibody Modelling of the Human Body for Vibration Induced Direct and Cross-axis Seat to Head Transmissibility, Raj Desai, Anirban Guha and P. Seshu, Proc. of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2021, 235(17):3146-3161., Multibody Modelling of the Human Body for Vibration Induced Direct and Cross-axis Seat to Head Transmissibility, , , 2021, ,

Raj Desai, Anirban Guha, P Seshu, A comparison of different models of passive seat suspensions, Raj Desai, Anirban Guha, P Seshu, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile engineering, 235 (9), 2021, pp. 2585-2604., A comparison of different models of passive seat suspensions, , , 2021, ,

Raj Desai, Anirban Guha, P Seshu, A comparison of quarter, half and full car models for predicting vibration attenuation of an occupant in a vehicle, Raj Desai, Anirban Guha, P Seshu, Journal of Vibration Engineering & Technologies, 2021, pp. 1-19., A comparison of quarter, half and full car models for predicting vibration attenuation of an occupant in a vehicle, , , 2021, ,

Raj Desai, Anirban Guha, P Seshu, Modelling and simulation of active and passive seat suspensions for vibration attenuation of vehicle occupants, Raj Desai, Anirban Guha, P Seshu, International Journal of Dynamics and Control, 2021, v9, pp. 1423-1443, Modelling and simulation of active and passive seat suspensions for vibration attenuation of vehicle occupants, , , 2021, ,

Raj Desai, Anirban Guha, P Seshu, Modelling and simulation of an integrated human-vehicle system with non-linear cushion contact force, Raj Desai, Anirban Guha, P Seshu, Simulation Modelling Practice and Theory: Elsevier, 106 (2021), 102206., Modelling and simulation of an integrated human-vehicle system with non-linear cushion contact force, , , 2021, ,

S Deshmukh, A Borkar, A Alankar, S Krishnan, S Ramamoorthy, Towards the design of soft periodic porous structures for acoustic applications, SAPEM Conference Proceedings, , , 2021, ,

S Mishra, H Maharaja, SK Mishra, J Vasavada, JS Jha, Influence of Annealing Time on Local Texture Evolution in Forged Ti–6Al–4V Alloy , , Advances in Mechanical Processing and Design, , , 2021, https://doi.org/10.1007/978-981-15-7779-6_45, 507-513

S. K. Maurya, J. F. Nie, A. Alankar, Atomistic analyses of HCP-FCC transformation and reorientation of Ti in Al-Ti multilayers, Computational Materials Science, , , 2021, , p. 110329

Sagar Ingle, Chandra Sekher Yerramalli, Anirban Guha, Sushil Mishra, Effect of material properties on ballistic energy absorption of woven fabrics subjected to different levels of inter-yarn friction, Composite Structures, 266, , 2021, https://doi.org/10.1016/j.compstruct.2021.113824,

Shah DS, Taylan O, Verstraete M, Berger P, Vandenneucker H, Scheys L, Can intraoperative intra-articular loads predict postoperative knee joint laxity following total knee arthroplasty? a cadaver study with smart tibial trays, Sensors, 21, 15, 2021, 10.3390/s21155078, 5078

SR Singh, J Vasavada, RG Mote, SK Mishra, To study the effect of Microstructures on Machinability of Inconel-718 Superalloy in Micro-drilling process, Journal of Manufacturing Science and Engineering, 143, 7, 2021, https://doi.org/10.1115/1.4050176, 8

Tarlochan Singh, Akshay Dvivedi, Anurag Shanu, Pradeep Dixit, Experimental Investigations of Energy Channelization Behavior in Ultrasonic Assisted Electrochemical Discharge Machining, Journal of Materials Processing Technology, 293, , 2021, , 117083

U. Tewary, D. Mukherjee, A. Alankar, G. Mohapatra, S. Sahay, I. Samajdar, and S. Karagadde, An Integrated Multi-Scale Model for Graphite Growth Mechanism in Industrial Cast Iron, Metallurgical and Materials Transactions B, , , 2021, , 1-19

V. Revi, S. Kasodariya, A. Talapatra, G. Pilania, A. Alankar, Machine Learning Elastic Constants of Multi-Component Alloys, Computational Materials Science, 198, , 2021, , 110671

Vikas Prasad, Dnyanesh N Pawaskar, Pasumarthy Seshu, Controller design and multi-objective optimization of heavy goods vehicle suspension system by geometry-inspired GA, Vikas Prasad, Dnyanesh N Pawaskar, Pasumarthy Seshu, Structural and Multidisciplinary Optimization, 2021, v9, 983-1001., Controller design and multi-objective optimization of heavy goods vehicle suspension system by geometry-inspired GA, , , 2021, ,

Weygers I, Kok M, Seel T, Shah DS, Taylan O, Scheys L, Hallez H, Claeys K, In-vitro validation of inertial-sensor-to-bone alignment, Journal of Biomechanics, 128, , 2021, 10.1016/j.jbiomech.2021.110781, 110781

Weygers I, Kok M, Seel T, Shah DS, Taylan O, Scheys L, Hallez H, Claeys K, Reference in-vitro dataset for inertial-sensor-to-bone alignment applied to the tibiofemoral joint, Scientific Data, 8, 1, 2021, 10.1038/s41597-021-00995-8, 208

G. Thirunavukarasu, S. Kundu, V. V. Patel, A. Alankar, Analytical Investigation on the Evolution and Growth of β-Ti and Fe-Nb-Based Intermetallics in Diffusion Coupled Joints of Ti6Al4V|Nb|SS, Diffusion Foundations, May 2020, , 2020, , 3-24

1. A Ranjan, P A Davidson, U R Christensen, J Wicht, On the generation and segregation of helicity in geodynamo simulations, Geophysical Journal International, , 221, , 2020, https://doi.org/10.1093/gji/ggaa011, 741-757

A Kumar, A Sood, N Gotawala, S Mishra, A Shrivastava, Friction Stir Processing of Magnesium Alloy with Spiral Tool Path Strategy , Magnesium Technology, , , 2020, https://doi.org/10.1007/978-3-030-36647-6_31, 197-205

A Kumar, N Gotawala, A Sood, S Mishra, A Shrivastava, Experimental Investigation of Raster Tool Path Strategy for Friction Stir Processing of Magnesium Alloy , Magnesium Technology, , , 2020, https://doi.org/10.1007/978-3-030-36647-6_51, 341-346

A Mashalkar, S Mishra, V Nandedkar, R Bobade, Grain Size Regulation During LDH Test , ICDSMLA 2019, , , 2020, https://doi.org/10.1007/978-981-15-1420-3_146, 1358-1365

A. Alankar, A. Mishra, M. Warudkar, Indian Patent: A WEAR-TESTING APPARATUS, Filed on 22 June 2020, Indian Patent, , , 2020, ,

A. Alone, Ritam Chatterjee, A. Alankar, A Comparative Study of the effect of Random and Preferred Crystallographic Orientations on Dynamic Recrystallization Behavior through a Cellular Automata Model, Materials Today, , , 2020, ,

A. Ranjan, P. A. Davidson, Columnar heat transport via advection induced by inertial waves, International Journal of Heat and Fluid Flow, (accepted), , 2020, ,

Aftab Ahmed, Awatef Khlifi, Shardul Pandit, Rajul Patkar, Anjali Joshi, Pradeep Dixit, Brahim Mezghani, Maryam Shojaei Baghini, Design, fabrication, and characterization of SU-8/carbon black nanocomposite based polymer MEMS acceleration sensor, Microsystem Technologies, , , 2020, https://doi.org/10.1007/s00542-020-04824-7,

Aman Kumar Verma, Dileep Kumar Mishra, Karan Pawar, Pradeep Dixit, Investigations into Surface topography of glass microfeatures formed by pulsed Electrochemical discharge milling for microsystem applications, Microsystems Technology, , , 2020, ,

Ankit Jain, Multichannel thermal transport in crystalline Tl3VSe4, Physical Review B, 102, 201201, 2020, ,

Awatef Khlifi, Aftab Ahmed, Shardul Pandit, Brahim Mezghani, Rajul Patkar, Pradeep Dixit, Maryam Shojaei Baghini, Experimental and Theoretical Dynamic Investigation of MEMS Polymer Mass-Spring Systems, IEEE Sensors, 20, 14, 2020, ,

B Marrapu, VK Barnwal, S Chakrabarty, A Tewari, SK Mishra, Experimental and Numerical Analysis on Dual Phase Steel (DP780) Sheet Forming Limit and Effect of Microstructure Evolution on Formability, Journal of Materials Engineering and Performance, 29, 12, 2020, https://doi.org/10.1007/s11665-020-05247-1, 8247-8260

Bhasale GD, Sood A, Singh SR, Pandey A, Shrivastava A, High Temperature Corrosion of Additively Manufactured Inconel 625, TMS 2020 149th Annual Meeting & Exhibition Supplemental Proceedings, , , 2020, https://doi.org/10.1007/978-3-030-36296-6_123, 1329-1338

Dandois F, De Buck S, Beckers L, Shah DS, Slane L, Vandenneucker H, Scheys L, SCreg: A registration-based platform to compare unicondylar knee arthroplasty SPECT/CT scans, BMC Musculoskeletal Disorders, 21, 162, 2020, 10.1186/s12891-020-3185-9, 1-8

Dhvaneel Visaria and Ankit Jain, https://www.me.iitb.ac.in/~a_jain/mypublications/APL_2020.pdf, Applied Physics Letters, 117, 202107, 2020, ,

Dileep Kumar Mishra, Karan Pawar, Pradeep Dixit, Effect of tool electrode-workpiece gap in the microchannel formation by electrochemical discharge machining, ECS Journal of Solid State Science and Technology, 9, 3, 2020, , 034011

Faeez Masurkar, Peter Tse, and Nitesh P. Yelve, Theoretical and experimental measurement of intrinsic and fatigue induced material nonlinearities using Lamb wave-based nonlinearity parameters, Measurement, 151, , 2020, DOI:10.1016/j.measurement.2019.107148, 107148

Ghate ND, Gaur B, Shrivastava A, Effect of Scanning Strategy on Additively Manufactured Ti6Al4V. In: The Minerals, Metals & Materials Society (eds) TMS 2020 149th Annual Meeting & Exhibition Supplemental Proceedings. The Minerals, Metals & Materials Series. Springer, Cham, TMS 2020 149th Annual Meeting & Exhibition Supplemental Proceedings, , , 2020, https://doi.org/10.1007/978-3-030-36296-6_33, 353-365

Ghate ND, Pandey A, Srivastava A, Shrivastava A., Annealing of Additively Manufactured Inconel 625, TMS 2020 149th Annual Meeting & Exhibition Supplemental Proceedings, , , 2020, https://doi.org/10.1007/978-3-030-36296-6_31, 329-340

Ghate ND, Shrivastava A., Laser processing of multiple surface characteristics for Ti6Al4V biomedical implants, Materials and Manufacturing Processes, , , 2020, https://doi.org/10.1080/10426914.2020.1832686,

Ghate ND, Sood A, Srivastava A, Shrivastava A., Ductile fracture based joint formation mechanism during friction stir welding. International Journal of Mechanical Sciences., International Journal of Mechanical Sciences, 168, , 2020, ,

Gotawala N, Abhishek K, Mishra S, Shrivastava A., Microstructure and texture evolution of complete Mg-3Al-0.2Ce alloy blanks upon multi-pass friction stir processing with spiral strategy, Materials Today Communications, , , 2020, https://doi.org/10.1016/j.mtcomm.2020.101850,

Gotawala N, Shrivastava A., Analysis of material distribution in dissimilar friction stir welded joints of Al 1050 and copper, Journal of Manufacturing Processes, 57, , 2020, https://doi.org/10.1016/j.jmapro.2020.07.043, 725-736

Gotawala N, Shrivastava A., Microstructural analysis and mechanical behavior of SS 304 and titanium joint from friction stir butt welding, Materials Science and Engineering: A, 789, , 2020, , https://doi.org/10.1016/j.msea.2020.139658

JP Patil, YS Gaikhe, V Nandedkar, SK Mishra, SK Saha, Contact Analysis for Contact Thermoforming of PMMA Sheet, Materials Performance and Characterization, 9, 2, 2020, https://doi.org/10.1520/MPC20190117, 285-302

Julfekar Arab, Pradeep Dixit, Influence of tool electrode feed rate in the electrochemical discharge drilling of a glass substrate, Materials and Manufacturing Processes, 35, , 2020, ,

Kumar A, Gotawala N, Sood A, Mishra S, Shrivastava A, Experimental Investigation of Raster Tool Path Strategy for Friction Stir Processing of Magnesium Alloy, Magnesium Technology 2020, , , 2020, https://doi.org/10.1007/978-3-030-36647-6_51, 341-346

Kumar A, Sood A, Gotawala N, Mishra S, Shrivastava A, Friction Stir Processing of Magnesium Alloy with Spiral Tool Path Strategy, Magnesium Technology 2020, , , 2020, https://doi.org/10.1007/978-3-030-36647-6_31, 197-205

M. Dinachandra and A. Alankar, A phase-field study of crack propagation and branching in functionally graded materials using explicit dynamics, Theoretical and Applied Fracture Mechanics, , , 2020, ,

P. Jain and V. Sangwan, Generation and Control of Impulsive Forces by a Planar Bi-Rotor Aerial Vehicle through a Cable Suspended Mass, 2020 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, , , 2020, , 868-873

Peter Tse, Faeez Masurkar, and Nitesh P. Yelve, Estimation of remaining useful life of fatigued plate specimens using Lamb wave-based nonlinearity parameters, Structural Control and Health Monitoring, 27, 4, 2020, DOI:10.1002/stc.2486, e2486

PP Duvvuri M. Krishnamoorthi, S. Sreedhara, Experimental, numerical and exergy analyses of a dual fuel combustion engine fuelled with syngas and biodiesel/diesel blends, Applied Energy, 263, , 2020, ,

PP Duvvuri, RK Shrivastava, S Sreedhara, Numerical optimization of a diesel combustion system to reduce soot mass and particle number density, FUEL, 266, , 2020, ,

PP Duvvuri, RK Shrivastava, S Sukumaran, S Sreedhara, Numerical modeling of thermophoretic deposition on cylinder liner of a diesel engine using a sectional soot model, Journal of Aerosol Science, 139, 105464, Journal of Aerosol Science, 139, , 2020, ,

PP Duvvuri, S Sukumaran, RK Shrivastava, S Sreedhara, Modeling the effect of parametric variations on soot particle size distribution in a diesel engine, Journal of Energy Resources Technology, 142, 3, 2020, ,

Pradeep Dixit, Harindra Kumar Kannojia, Kimmo Hentinen, Through-substrate vias based three-dimensional interconnection technology, Handbook of Silicon Based MEMS Materials and Technologies, , , 2020, ,

Priyaranjan Sharma, Dileep Kumar Mishra, Pradeep Dixit, Experimental investigations into alumina ceramic micromachining by electrochemical discharge machining process, Procedia Manufacturing, 48, , 2020, , 244-250

R A Flores, C Paolucci, K Winther, A. Jain et al, , Active Learning Accelerated Discovery of Stable Iridium Oxide Polymorphs for the Oxygen Evolution Reaction, Chemistry of Materials, 32, 13, 2020, , 5854-5863

S Chakrabarty, SR Panda, D Das, P Pant, SK Mishra, Effect of grain size and specimen thickness on formation of mechanical twin , Materials Today: Proceedings, 26, , 2020, https://doi.org/10.1016/j.matpr.2020.02.269, 1323-1329

S. Ahmad, V. Tathavadkar, A. Alankar, K. Narasimhan, Effect of Mg on Flow Behavior of Al–Mg Alloys and Its Constitutive Modeling Using Finite Element Analysis, Light Metals 2020, , , 2020, , 283-288

S. Deshmukh, A. Borkar, A. Alankar, S. Krishnan, S. Ramamoorthy, A Priori Determination of the Elastic and Acoustic Responses of Periodic Poroelastic Materials, Applied Acoustics, , , 2020, ,

S. Kundu, R. Jones, D. Peng, N. Matthews, A. Alankar, R. K. Singh Raman and P. Huang, Studies in Modeling the Effect of Residual Stress on Crack Growth in Wire + Arc Additively Manufactured, Friction Stir Welded and LSP Parts, and Cold Spray Repairs, Materials, , , 2020, ,

S. S. Pandurangi, R. S. Elliott, T. J. Healey and N. Triantafyllidis, Stable spatially localized configurations in a simple structure – a global symmetry-breaking approach, Journal of Elasticity, 142, 1, 2020, 10.1007/s10659-020-09794-5, 163 –199

S. S. Pandurangi, T. J. Healey and N. Triantafyllidis, Hidden asymptotic symmetry in a long elastic structure, SIAM Journal on Applied Mathematics, 80, 3, 2020, 10.1137/19M125162X, 1083 – 1100

S. Wadhwa, P.D. Suthar, V. Sangwan, Simulation Study to Test Feasibility of a Planar Teleoperated Linkage for Qualitative Stiffness Sensing with Communication Delays, 2020 8th IEEE RAS/EMBS International Conference for Biomedical Robotics and Biomechatronics, , , 2020, , 358-636

Shah DS, Horwitz M, Kedgley AE, Extensor retinaculum excision does not affect wrist tendon forces: a cadaveric simulator study, Journal of Hand Surgery European Volume, 45, 9, 2020, 10.1177/1753193420928781, 986-988

Shah DS, Middleton C, Gurdezi S, Horwitz M, Kedgley AE, The effect of surgical treatments for trapeziometacarpal osteoarthritis on wrist biomechanics: A cadaver study, Journal of Hand Surgery American Volume, 45, 5, 2020, 10.1016/j.jhsa.2019.10.003, 389-398

Shanta Chakrabarty, Marrapu Bhargava, Harsh Kumar Narula, Prita Pant, Sushil K Mishra, Prediction of strain path and forming limit curve of AHSS by incorporating microstructure evolution, The International Journal of Advanced Manufacturing Technology, 106, 11, 2020, https://doi.org/10.1007/s00170-020-04948-0, 5085–5098

Subrat Patro, Dileep Kumar Mishra, Julfekar Arab, Pradeep Dixit, Numerical and experimental analysis of high aspect ratio micro-tool electrodes fabrication using controlled electrochemical machining, Journal of Applied Electrochemistry, 50, , 2020, https://doi.org/10.1007/s10800-019-01380-5, 169-184

Weygers I, Kok M, Seel T, Olsson F, De Vroey H, Shah DS, Taylan O, Hallez H, Scheys L, Claeys K, An in vitro validation method for inertial-sensor-to-bone alignment, Gait & Posture, 81, 1, 2020, 10.1016/j.gaitpost.2020.08.092, 385-387

A Gupta, RK Khatirkar, T Dandekar, JS Jha, S Mishra, Recrystallization behavior of a cold rolled Ti–15V–3Sn–3Cr–3Al alloy , Journal of Materials Research , 34, 18, 2019, DOI: 10.1557/jmr.2019.225, 3082-3092

A. Mishra and A. Alankar, Revisiting dislocation reactions and their role in uniaxial deformation of copper single crystal micro-pillars, Modelling and Simulation in Materials Science and Engineering, 27 (5), 2019, p. 055010

A. Soni and A. Alankar, Analyses of Constitutive Behaviour of As-Cast Aluminum Alloys AA3104, AA5182 and AA6111 during DC casting using Physically Based Models, Journal of Engineering Materials and Technology, 141 (3), 2019, p. 034502

AJH McGaughey, A. Jain, HY Kim, B. Fu, "Phonon properties and thermal conductivity from first principles, lattice dynamics, and the Boltzmann transport equation", Journal of Applied Physics 125, 1 (2019).

C Gupta, JS Jha, B Jayabalan, R Gujrati, A Alankar, S Mishra, Correlating Hot Deformation Parameters with Microstructure Evolution During Thermomechanical Processing of Inconel 718 Alloy, Metallurgical and Materials Transactions A, 50, 10, 2019, 4714-4731, https://doi.org/10.1007/s11661-019-05380-0

C. Gupta, J. Jha, B. Jayabalan, R. Gujrati, A. Alankar and S. Mishra, Correlating hot deformation parameters with microstructure evolution during thermomechanical processing of Inconel 718 alloy , Metallurgical and Materials Transactions A, Accepted, , 2019, ,

Carpanen D, Kedgley AE, Shah DS, Edwards DS, Plant D, Masouros SD, Injury risk of interphalangeal and metacarpophalangeal joints under impact loading, Journal of the Mechanical Behaviour of Biomedical Materials, 97, 1, 2019, 10.1016/j.jmbbm.2019.05.037, 306-311

Dadhich R., Alankar A.,Coupled Crystal Plasticity-Phase Field Modeling of Multi-Phase Metals, Procedia Structural Integrity, 14, 2019, p. 104-111

Deshmukh, S., Ronge, H., & Ramamoorthy, S. (2019). Design of periodic foam structures for acoustic applications: Concept, parametric study and experimental validation. Materials & Design, 175, 107830.

Dey P., Hedau G., Saha S.K.,Experimental and numerical investigations of fluid flow and heat transfer in a bioinspired surface enriched microchannel,International Journal of Thermal Sciences,135,,2019,44.

Dhala S., Mishra S., Tewari A., Alankar A.,Modeling of finite deformation of pseudoelastic NiTi shape memory alloy considering various inelasticity mechanisms,International Journal of Plasticity,115,2019,p. 216-237.

Dhanda, M., Pande, S. S., Adaptive tool path planning strategy for freeform surface machining using point cloud, Computer-Aided Design and Applications, 16(2), 2019, 289-307, https://doi.org/10.14733/cadaps.2019.289-307

Dileep Mishra, Aman Kumar Verma, Julfekar Arab, Deepak Marla, and Pradeep Dixit, Numerical and experimental investigations into microchannel formation in glass substrate using electrochemical discharge machining, Journal of Micromechanics and Microengineering, 29, 7, 2019, , 075004

Dileep Mishra, Julfekar Arab, Yashwant Magar, and Pradeep Dixit, High Aspect Ratio Glass Micromachining by Multi-Pass Electrochemical Discharge Based Micromilling Technique, ECS Journal of Solid State Science and Technology , 8, 6, 2019, , P322-P331

Gotawala N, Shrivastava A., Investigation of Interfacial Diffusion During Dissimilar Friction Stir Welding., Friction Stir Welding and Processing X, , , 2019, , 109-119

Gotawala N, Wadighare A, Shrivastava A., Phase transformation during friction stir processing of dual-phase 600 steel., Journal of Materials Science, , , 2019, , 1-14

Gujrati R., Gupta A., Jha J., Mishra S., Alankar A.,Understanding activation energy of dynamic recrystallization in Inconel 718, Materials Science and Engineering A, 744, 2019, p. 638-651

Harindra Kumar Kannojia, and Pradeep Dixit, Effect of surface roughness on void formation and intermetallic growth in electodeposited Cu-Sn stacks, Materials letters, 257, , 2019, https://doi.org/10.1016/j.matlet.2019.126710,

Harindra Kumar Kannojia, and Pradeep Dixit, Experimental investigations in the intermetallic and microvoid formation in sub‑200 °C Cu–Sn bonding, Journal of Materials Science: Materials in Electronics, 30, , 2019, https://doi.org/10.1007/s10854-019-02017-1, 19

Harindra Kumar Kannojia, Julfekar Arab, Bhaskar Jyoti Pegu, and Pradeep Dixit, Fabrication and Characterization of Through-Glass Vias by the ECDM Process, Journal of Electrochemical Society, 166, , 2019, , D531

J Vasavada, HK Narula, S Mishra, TK Nandy, A Tewari, Development of novel Moving Wave Front image processing algorithm and microstructural quantification of Tungsten Heavy Alloy 170, , Computational Materials Science , 170, , 2019, https://doi.org/10.1016/j.commatsci.2019.109181, 10918

JP Patil, V Nandedkar, S Saha, S Mishra, A numerical approach on achieving uniform thickness distribution in pressure thermoforming , Manufacturing Letters , 21, , 2019, https://doi.org/10.1016/j.mfglet.2019.07.003, 24-27

JP PATIL, VM NANDEDKAR, S MISHRA, Thermal analysis of the heating stage of the thermoforming process , Blue Eyes Intelligence Engineering and Sciences Publication, , , 2019, ,

JS Jha, B Jayabalan, SP Toppo, R Singh, A Tewari, SK Mishra, Hot deformation behaviour of Ti-6Al-4V alloy with a transformed microstructure: a multimodal characterisation , Philosophical Magazine , 99, 12, 2019, https://doi.org/10.1080/14786435.2019.1584409, 1429-1459

JS Jha, S Dhala, SP Toppo, R Singh, A Tewari, SK Mishra, B Jayabalan, Effect of strain amplitude on low cycle fatigue and microstructure evolution in Ti-6Al-4V: A TKD and TEM characterization, Materials Characterization, 155, , 2019, https://doi.org/10.1016/j.matchar.2019.109829, 109829

JS Jha, SP Toppo, R Singh, A Tewari, SK Mishra, Flow stress constitutive relationship between lamellar and equiaxed microstructure during hot deformation of Ti-6Al-4V , Journal of Materials Processing Technology, 270, , 2019, https://doi.org/10.1016/j.mechmat.2019.04.021, 216-227

JS Jha, SP Toppo, R Singh, A Tewari, SK Mishra, Flow stress constitutive relationship between lamellar and equiaxed microstructure during hot deformation of Ti-6Al-4V, Journal of Materials Processing Technology, 270, , 2019, https://doi.org/10.1016/j.jmatprotec.2019.02.030, 216-227

JS Jha, SP Toppo, R Singh, A Tewari, SK Mishra, Understanding flow behavior and microstructure evolution during thermomechanical processing of mill-annealed Ti-6Al-4V titanium alloy, Materials Performance and Characterization , 8, 5, 2019, https://doi.org/10.1520/MPC20190010, 916-931

Julfekar Arab, Dileep Kumar Mishra, Pratik Adhale, Pradeep Dixit, Micro array hole formation in glass using electro-chemical discharge machining, Procedia Manufacturing, 34, , 2019, , 349

Julfekar Arab, Dileep Kumar Mishra. Harindra Kumar Kannojia, Pratik Adhale, and Pradeep Dixit, Fabrication of multiple through-hole array in non-conductive materials by Electrochemical Discharge Machining for RF MEMS Packaging, Journal of Materials Processing Technology, 271, , 2019, , 542

Julfekar Arab, Harindra Kumar kannojia, and Pradeep Dixit, Effect of tool electrode roughness on the geometric characteristics of through-holes formed by ECDM, Precision Engineering, 60, , 2019, , 437

Julfekar Arab, Harshit singh Chauhan, Chetan Agrawal, Pradeep Dixit, Electrochemical discharge machining of soda lime glass for MEMS application, International Journal of Precision Technology, 8, , 2019, , 220

KG Bhide, S Sreedhara , Assessment of Tabulated Premixed Conditional Moment Closure Model Using Direct Numerical Simulation, Combustion Science and Technology, -, -, 2019, , 20

KG Bhide, S Sreedhara, Assessment of Tabulated Premixed Conditional Moment Closure Model Using Direct Numerical Simulation, Combustion Science and Technology, , , 2019, https://doi.org/10.1080/00102202.2019.1688796,

Khan, Kamran, Alwin Varghese, Pradeep Dixit, and Suhas S. Joshi, Effect of Tool Path Complexity on Top Burrs in Micromilling, Procedia Manufacturing, 34, , 2019, , 432-439

Kim Ming Ng, Faeez Masurkar, Peter Tse, and Nitesh P. Yelve, Design of a new optical system to generate narrowband guided waves with an application to evaluating health status of rail material, Optics Letters, 44, 23, 2019, DOI:10.1364/OL.44.005695, 5695–5698

Kukreja A., Pande, S. S., On estimation of scallop height from CNC part programming, 2nd International conference on computational methods in manufacturing, IIT Guwahati, India, March 8th to 9th, 2019

Makwana P., Goecke S.-F., De A.,Real-time heat input monitoring towards robust GMA brazing,Science and Technology of Welding and Joining,24,1,2019,16.

Mishra A., Alankar A.,Identification of Dislocation Reactions and their Role in Uniaxial Deformation of Copper Single Crystals,Procedia Structural Integrity, 14, 2019, p. 544-548

Nitesh P. Yelve, Suvarna Rode, Pravin Das, and Pranav Khanolkar, Some new algorithms for locating a damage in thin plates using Lamb waves, Engineering Research Express, 1, 1, 2019, DOI:10.1088/2631-8695/ab3c17, 015027

O. Voznny, L Levina, J Fan, M Askerka, A. Jain et al, Machine Learning Accelerates Discovery of Optimal Colloidal Quantum Dot Synthesis, ACS Nano, 13, 10, 2019, , 11122-11128

P Gaikwad, S Sreedhara, OpenFOAM based Conditional Moment Closure (CMC) model for solving non-premixed turbulent combustion: Integration and validation, Computers & Fluids, 190, , 2019, , 362

P Murkute, H Ghadi, S Sreedhara, S Chakrabarti, Detailed investigation of photoluminescence, structural, and elemental properties of ZnO thin films under various annealing ambient, Superlattices and Microstructures, 136, , 2019, ,

PP Duvvuri, S Sukumaran, RK Shrivastava, S Sreedhara, Modeling Soot Particle Size Distribution in Diesel Engines, FUEL, 243, , 2019, , 70

R Gujrati, C Gupta, JS Jha, S Mishra, A Alankar, Understanding activation energy of dynamic recrystallization in Inconel 718, Materials Science and Engineering: A , 744, , 2019, https://doi.org/10.1016/j.msea.2018.12.008, 638-651

R. Chatterjee, A. Alankar, Crystal Plasticity modeling of dynamic recrystallization in CP Ti , Procedia Structural Integrity, , , 2019, ,

R. Chatterjee, SVS Narayanmurty, A. Alankar, Dynamic Recrystallization in Titanium Alloys : A Comprehensive Review, Materials Performance and Characterization , Materials Performance and Characterization, , , 2019, ,

R. Dadhich and A. Alankar, Deep Learning Based Predictive Modeling for Structure-Property Linkages, Materialia, Accepted, , 2019, ,

Raj, Vinay C; Kuntikana, Pramod; Sreedhara, S; Prabhu, SV;,Heat transfer characteristics of impinging methane diffusion and partially premixed flames,International Journal of Heat and Mass Transfer,129,,2019,873-893.

S Dhala, S Mishra, A Tewari, A Alankar, Analyses of orientation dependent nanoindentation response of pseudoelastic NiTi alloy using a crystal plasticity model, Mechanics of Materials , 135, , 2019, https://doi.org/10.1016/j.mechmat.2019.04.021, 1-12

S Dhala, S Mishra, A Tewari, A Alankar, Modeling of finite deformation of pseudoelastic NiTi shape memory alloy considering various inelasticity mechanisms, International Journal of Plasticity, 115, , 2019, https://doi.org/10.1016/j.ijplas.2018.11.018, 216-237

S. Dhala, S. Mishra, A. Tewari, A. Alankar, Analyses of orientation dependent nanoindentation response of pseudoelastic NiTi alloy using a crystal plasticity model, Mechanics of Materials, Mechanics of Materials, 135, 2019, p. 1-12

S. M. Khot, Nitesh P. Yelve, Praseed Kumar, Gaurav A. Purohit, and Deependra Singh, Experimental investigation of performances of different optimal controllers in active vibration control of a cantilever beam, ISSS Journal of Micro and Smart Systems, 8, 2, 2019, DOI:10.1007/s41683-019-00040-2, 101–111

T Sukirt, P Gaikwad, S Sreedhara, Reynolds-Averaged Navier–Stokes Simulations of Turbulence-Radiation Interaction in a Turbulent Diffusion Jet Flame, Journal of Thermophysics and Heat Transfer, , , 2019, , 1

T. Gopinath, S. Kundu, V. Patel, A. Alankar, Diffusion Bonding of Ti6Al4V and SS 304 with Nb Interlayer, Materials Performance and Characterization, (2019), Accepted

Taibani A., Phalke V., Alankar A., Visaria A., Krishnan A.,Analysis of temperature swing thermal insulation for performance improvement of diesel engines, SAE Journal of Engines, 12, 2019, p. (03-12-02-0009)

V. R. Mittal and V. Sangwan, <p>Contact Force and Position Tracking with a Planar Aerial Manipulator</p>, Proceedings of ASME Dynamic Systems and Control Conference, , , 2019, ,

VK Barnwal, S Chakrabarty, A Tewari, K Narasimhan, SK Mishra, Influence of Single-Point Incremental Force Process Parameters on Forming Characteristics and Microstructure Evolution of AA-6061 Alloy Sheet, Journal of Materials Engineering and Performance, 28, 11, 2019, https://doi.org/10.1007/s11665-019-04446-9, 7141-7154

Yogesh S. Andhale, Faeez. A. Masurkar, and Nitesh. P. Yelve, Localization of damages in plain and riveted aluminium specimens using Lamb waves, International Journal of Acoustics and Vibration, 24, 1, 2019, DOI:10.20855/ijav.2019.24.11485, 150–165

A Ranjan, P A Davidson, U R Christensen, J Wicht,Internally-driven inertial waves in geodynamo simulations,Geophysical Journal International,213,2,2018,1281-1295.

A. Jain and T. Bligaard, "Atomic-position independent descriptor for machine learning of material properties", Physical Review B 98, 21 (2018).

Abraham, S., Vedula, R.P.,Effectiveness distribution measurements for a row of heated circular jets impinging on a cylindrical convex surface at different inclinations,International Journal of Heat and Fluid Flow,69,,2018,210.

Abraham, S., Vedula, R.P.,Local effectiveness and Nusselt number distributions for a rectangular jet impinging on a cylindrical convex surface at different angles,International Journal of Thermal Sciences,124,,2018,407.

Adake C.V., Bhargava P., Gandhi P.,Characterization techniques to predict mechanical behaviour of green ceramic bodies fabricated by ceramic microstereolithography,IOP Conference Series: Materials Science and Engineering,310,1,2018,12078.

Adhikari S., Sayre A., Chandy A.J.,In situ adaptive tabulation (ISAT) for combustion chemistry in a network of perfectly stirred reactors (PSRs) for the investigation of soot formation and growth,Computers and Chemical Engineering,113,,2018,196.

Agrawal P., Gandhi P.S., Neild A.,Continuous Focusing of Microparticles in Horizontally Actuated Rectangular Channels,Physical Review Applied,10,2,2018,24036.

Alexandrov S., Date P.,An alternative interpretation of axial friction test results for viscoplastic materials,Mechanics of Time-Dependent Materials,22,2,2018,259.

Alexandrov S., Mokryakov V., Date P.,Ideal flow theory of pressure-dependent materials for design of metal forming processes,Materials Science Forum,920 MSF,,2018,193.

Ambekar A., Chowdhury A.,An experimental technique for determination of intrinsic burning rate constants of liquid fuels,Applied Thermal Engineering,135,,2018,238.

Ambekar A., Maurya A.K., Chowdhury A.,Droplet combustion studies of nitromethane and its blends,Experimental Thermal and Fluid Science,93,,2018,431.

Aneesh A.M., Sharma A., Srivastava A., Chaudhury P.,Effects of wavy channel configurations on thermal-hydraulic characteristics of Printed Circuit Heat Exchanger (PCHE),International Journal of Heat and Mass Transfer,118,,2018,304.

Balasubramanian S., Mirajkar H.N., Banerjee A.K.,Role of dispersed particles on the dynamics of an umbrella cloud of a forced plume in a linearly stratified environment,Environmental Fluid Mechanics,18,4,2018,985.

Balasubramanian S., Zhong Q.,Entrainment and mixing in lock-exchange gravity currents using simultaneous velocity-density measurements,Physics of Fluids,30,5,2018,56601.

Barnwal V.K., Chakrabarty S., Tewari A., Narasimhan K., Mishra S.K.,Forming behavior and microstructural evolution during single point incremental forming process of AA-6061 aluminum alloy sheet,International Journal of Advanced Manufacturing Technology,95,43191,2018,921.

Bhagat K., Prabhakar M., Saha S.K.,Estimation of thermal performance and design optimization of finned multitube latent heat thermal energy storage,Journal of Energy Storage,19,,2018,135.

Bhagchandani R.K., Kapil S., Kamble P., Karunakaran K.P.,Investigation of ablation studies of EPS pattern produced by rapid prototyping,Virtual and Physical Prototyping,13,4,2018,311.

Bhalerao N.B., Joshi S.S., Naik N.K.,High Strain Rate and High Temperature Behavior of Ti-6Al-4V Alloy under Compressive Loading,Journal of Engineering Materials and Technology, Transactions of the ASME,140,2,2018,21009.

Bhardwaj, Rajneesh;,Analysis of an Evaporating Sessile Droplet on a Non-Wetted Surface,Colloid and Interface Science Communications,24,,2018,49-53.

Bhargava M., Chakrabarty S., Barnwal V.K., Tewari A., Mishra S.K.,Effect of microstructure evolution during plastic deformation on the formability of Transformation Induced Plasticity and Quenched & Partitioned AHSS,Materials and Design,152,,2018,65.

Bhati, Awan; Sawanni, Rajat; Kulkarni, Kaushik; Bhardwaj, Rajneesh;,Role of skin friction drag during flow-induced reconfiguration of a flexible thin plate,Journal of Fluids and Structures,77,,2018,134-150.

Bhide, Kedar G; Sreedhara, S;,Direct Numerical Simulation of Autoignition in Turbulent Non-premixed Combustion,Modeling and Simulation of Turbulent Combustion,,,2018,311-333.

Biswas, Mahitosh; Singh, Sandeep; Balgarkashi, Akshay; Makkar, Roshan; Bhatnagar, Anuj; Sreedhara, Sheshadri; Chakrabarti, Subhananda;,Vertical strain-induced dot size uniformity and thermal stability of InAs/GaAsN/GaAs coupled quantum dots,Journal of Alloys and Compounds,748,,2018,601-607.

Chaudhary S., Sankar M., Prasad V.V.S., Baligidad R.G., Gokhale A.A.,Effect of tungsten and zirconium on structure and properties of niobium,High Temperature Materials and Processes,37,8,2018,749.

Choi, C.-H., Krishnan, S., TeGrotenhuis, W., Chang, C.-H.,Capillary rise of nanostructured microwicks,Micromachines,9,4,2018,.

CT Dinh†, A. Jain†, FPG Arquer†, PD Luna, J. Li, et al., "Multi-site electrocatalysts for hydrogen evolution in neutral media by destabilization of water molecules", Nature Energy 4, 107 (2019)

D. Bansal, J.L. Niedziela, R. Sinclair, V. Ovidiu Garlea, D.L. Abernathy, S. Chi, Y. Ren, H. Zhou, and O. Delaire,Momentum-resolved observations of the phonon instability driving geometric improper ferroelectricity in yttrium manganite,Nature Communications,9,,2018,15.

D. Raut, R.L. Narayan, Parag Tandaiya, U. Ramamurty,Temperature-dependence of mode I fracture toughness of a bulk metallic glass,Acta Materialia,144,,2018,10.1016/j.actamat.2017.10.063,325

Darak, M.S., Mote, R.G., Shukla, S.,Single-Spot Focusing with Plasmonic Phase Manipulation,Annalen der Physik,530,11,2018,.

DebRoy T., Wei H.L., Zuback J.S., Mukherjee T., Elmer J.W., Milewski J.O., Beese A.M., Wilson-Heid A., De A., Zhang W.,Additive manufacturing of metallic components – Process, structure and properties,Progress in Materials Science,92,,2018,112.

Deepak Marla, Sebastian A. Andersen, Yang Zhang, Jesper H. Hattel,A study of laser surface modification of polymers: A comparison in air and water,Journal of Manufacturing Processes,32,1,2018,432-437.

Deepak Marla, Yang Zhang, Jesper H. Hattel, Jon Spangenberg,Modeling of nanosecond pulsed laser processing of polymers in air and water,Modelling and Simulation in Materials Science and Engineering,26,5,2018,550057.

Deorukhkar B.D., Doifode D.S., Date P.P., Alexandrov S.,Room temperature compression behavior of mixtures of carbonyl iron powder and HDPE,Key Engineering Materials,779 KEM,,2018,25.

Desai R., Guha A., Seshu P.,Multibody Biomechanical Modelling of Human Body Response to Direct and Cross Axis Vibration,Procedia Computer Science,133,,2018,494.

Dey S., Kartik V.,Intermittent impact dynamics of a cantilever scanning a surface at high speed,Journal of Applied Physics,123,12,2018,.

Dhanda, M., Pande, S. S., Efficient CNC Machining of Freeform Surfaces From Point Cloud, ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Quebec City, Quebec, Canada, August 26–29, 2018, V01AT02A016, doi:10.1115/DETC2018-85072

Doifode D.S., Deorukhkar B.D., Date P.P., Alexandrov S.,Rheological behavior of mixture of carbonyl iron powder (CIP) and high density polyethylene (HDPE),Key Engineering Materials,779 KEM,,2018,31.

Dubey S.K., Vedula R.P., Iyer K.N., Gaikwad A.J.,Local heat transfer coefficient measurements using thermal camera for upward flow of Freon 22 in a vertical tube at supercritical conditions and development of correlations,Nuclear Engineering and Design,328,,2018,80.

Dubey, S.K., Vedula, R.P., Iyer, K.N., Gaikwad, A.J.,Local heat transfer coefficient measurements using thermal camera for upward flow of Freon 22 in a vertical tube at supercritical conditions and development of correlations,Nuclear Engineering and Design,328,,2018,80.

Durgaprasad A., Giri S., Lenka S., Kundu S., Chandra S., Mishra S., Doherty R.D., Samajdar I.,Microstructural Engineering in Eutectoid Steel: A Technological Possibility?,Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science,49,5,2018,1520.

Durgaprasad A., Giri S., Lenka S., Sarkar S.K., Biswas A., Kundu S., Mishra S., Chandra S., Doherty R.D., Samajdar I.,Delamination of Pearlitic Steel Wires: The Defining Role of Prior-Drawing Microstructure,Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science,49,6,2018,2037.

Enayati H., Braun M.J., Chandy A.J.,Numerical simulations of porous medium with different permeabilities and positions in a laterally-heated cylindrical enclosure for crystal growth,Journal of Crystal Growth,483,,2018,65.

Enayati H., Chandy A.J., Braun M.J.,Large eddy simulation (LES) calculations of natural convection in cylindrical enclosures with rack and seeds for crystal growth applications,International Journal of Thermal Sciences,123,,2018,42.

Faeez Masurkar, Peter Tse, and Nitesh P. Yelve, Evaluation of inherent and dislocation induced material nonlinearity in metallic plates using Lamb waves, Applied Acoustics, 136, , 2018, DOI:10.1016/j.apacoust.2018.02.011, 76–85

Faeez Masurkar, Peter Tse, and Nitesh P. Yelve, Investigating the critical aspects of evaluating the material nonlinearity in metal plates using Lamb waves: Theoretical and numerical approach, Applied Acoustics, 140, , 2018, DOI:10.1016/j.apacoust.2018.06.015, 301–314

Gaddam A., Agrawal A., Joshi S.S., Thompson M.C.,Slippage on a particle-laden liquid-gas interface in textured microchannels,Physics of Fluids,30,3,2018,.

Gaddam A., Agrawal A., Joshi S.S., Thompson M.C.,Slippage on a particle-laden liquid-gas interface in textured microchannels,Physics of Fluids,30,3,2018,32101.

Gandhi P.S., Bobade R.S., Chen C.,On novel compliant mechanisms for remote center motion,Advances in Mechanical Engineering,10,4,2018,.

Garg H., Pandey B., Saha S.K., Singh S., Banerjee R.,Design and analysis of PCM based radiant heat exchanger for thermal management of buildings,Energy and Buildings,169,,2018,84.

Garg, Hemanshul; Soti, Atul K; Bhardwaj, Rajneesh;,A sharp interface immersed boundary method for vortex-induced vibration in the presence of thermal buoyancy,Physics of Fluids,30,2,2018,23603.

Garg, V., Mote, R.G., Fu, J.,Focused Ion Beam Direct Fabrication of Subwavelength Nanostructures on Silicon for Multicolor Generation,Advanced Materials Technologies,3,8,2018,.

Garland AK, Shah DS, Kedgley AE, Wrist tendon moment arms: quantification by imaging and experimental techniques, Journal of Biomechanics, 68, 1, 2018, 10.1016/j.jbiomech.2017.12.024, 136-140

Gautam P., Azizi Y., Chandy A.J.,An experimental and computational investigation of air-borne noise generation mechanisms in tires,Journal of Vibration and Control,,,2018,.

Gavasane A., Agrawal A., Bhandarkar U.,Study of rarefied gas flows in backward facing micro-step using Direct Simulation Monte Carlo,Vacuum,155,,2018,249.

Gavasane, A., Agrawal, A., Bhandarkar, U.,Study of rarefied gas flows in backward facing micro-step using Direct Simulation Monte Carlo,Vacuum,155,,2018,249.

Ghogare, S., Pande, S.S., Efficient CNC Tool Path Planning Using Point Cloud, ASME 2018 13th International Manufacturing Science and Engineering Conference, volume 4, College Station, Texas, USA, June 18-22, 2018, V004T03A019, doi:10.1115/MSEC2018-6314

Ghosh D.P., Sharma D., Mohanty D., Saha S.K., Raj R.,Facile Fabrication of Nanostructured Microchannels for Flow Boiling Heat Transfer Enhancement,Heat Transfer Engineering,,,2018,1.

Goislard de Monsabert B, Edwards D, Shah DS, Kedgley AE., Importance of consistent datasets in musculoskeletal modelling: a study of the hand and wrist, Annals of Biomedical Engineering, 46, 1, 2018, 10.1007/s10439-017-1936-z, 71-85

Gorasiya A., Saha S.K.,Single phase laminar fluid flow and heat transfer in microchannel with cylindrical and parallelepiped micro-fins,Heat and Mass Transfer/Waerme- und Stoffuebertragung,,,2018,.

Guo, Enyu; Shuai, Sansan; Kazantsev, Daniil; Karagadde, Shyamprasad; Phillion, AB; Jing, Tao; Li, Wenzhen; Lee, Peter D;,The influence of nanoparticles on dendritic grain growth in Mg alloys,Acta Materialia,152,,2018,127-137.

Gupta P., Srivastava A.,Numerical analysis of thermal response of tissues subjected to high intensity focused ultrasound,International Journal of Hyperthermia,,,2018,.

Halkarni S.S., Sridharan A., Prabhu S.V.,Experimental investigation on effect of random packing with uniform sized spheres inside concentric tube heat exchangers on heat transfer coefficient and using water as working medium,International Journal of Thermal Sciences,133,,2018,341.

Hemadri V., Agrawal A., Bhandarkar U.V.,Determination of tangential momentum accommodation coefficient and slip coefficients for rarefied gas flow in a microchannel,Sadhana - Academy Proceedings in Engineering Sciences,43,10,2018,.

Hemadri V., Biradar G.S., Shah N., Garg R., Bhandarkar U.V., Agrawal A.,Experimental study of heat transfer in rarefied gas flow in a circular tube with constant wall temperature,Experimental Thermal and Fluid Science,93,,2018,326.

Hemadri V., Duryodhan V.S., Agrawal A.,Liquid and gas flows in microchannels of varying cross section: a comparative analysis of the flow dynamics and design perspectives,Microfluidics and Nanofluidics,22,2,2018,.

Hemadri, V., Agrawal, A., Bhandarkar, U.V.,Determination of tangential momentum accommodation coefficient and slip coefficients for rarefied gas flow in a microchannel,Sadhana - Academy Proceedings in Engineering Sciences,43,10,2018,.

Hemadri, V., Biradar, G.S., Shah, N., Garg, R., Bhandarkar, U.V., Agrawal, A.,Experimental study of heat transfer in rarefied gas flow in a circular tube with constant wall temperature,Experimental Thermal and Fluid Science,93,,2018,326.

Hiremath C.P., Senthilnathan K., Naik N.K., Guha A., Tewari A.,Mechanistic model for fiber crack density prediction in cyclically loaded carbon fiber-reinforced polymer during the damage initiation phase,Journal of Composite Materials,,,2018,.

Hiremath C.P., Senthilnathan K., Naik N.K., Guha A., Tewari A.,Microstructural damage based micromechanics model to predict stiffness reduction in damaged unidirectional composites,Journal of Reinforced Plastics and Composites,37,12,2018,797.

Hiremath C.P., Senthilnathan K., Naik N.K., Guha A., Tewari A.,Microstructural damage based modeling of thermal conductivity of cyclically loaded CFRP,Composites Science and Technology,154,,2018,37.

Hiremath C.P., Senthilnathan K., Naik N.K., Guha A., Tewari A.,Numerical Study and Experimental Validation of Effect of Varying Fiber Crack Density on Stiffness Reduction in CFRP Composites,Journal of Materials Engineering and Performance,27,4,2018,1685.

Hodhigere Y., Jha J.S., Tewari A., Mishra S.,Finite element analysis-based approach for stress concentration factor calculation,Lecture Notes in Mechanical Engineering,,9790000000000,2018,1.

J.L. Niedziela,* D. Bansal,* A. May, J. Ding, T. Lanigan-Atkins, G. Ehlers, D.L. Abernathy, A. Said, and O. Delaire,Selective breakdown of phonon quasiparticles across superionic transition in CuCrSe2,Nature Physics,,,2018,.

Jagad P.I., Puranik B.P., Date A.W.,A finite volume procedure for fluid flow, heat transfer and solid-body stress analysis,International Journal of Computational Methods in Engineering Science and Mechanics,19,3,2018,171.

Jain M., Kandar T.K., Vhora S.F., Rao R.S., Mahesh K., Gupta A., Iyer K.N., Prabhu S.V.,An experimental study on the depressurization of the containment by water spray in a small scale facility,Annals of Nuclear Energy,112,,2018,208.

Jithin S., Raut A., Bhandarkar U.V., Joshi S.S.,FE Modeling for Single Spark in EDM Considering Plasma Flushing Efficiency,Procedia Manufacturing,26,,2018,617.

Jithin, S., Raut, A., Bhandarkar, U.V., Joshi, S.S.,FE Modeling for Single Spark in EDM Considering Plasma Flushing Efficiency,Procedia Manufacturing,26,,2018,617.

Joshi K., Bhandarkar U., Samajdar I., Joshi S.S.,Microstructural Characterization of Thermal Damage on Silicon Wafers Sliced Using Wire-Electrical Discharge Machining,Journal of Manufacturing Science and Engineering, Transactions of the ASME,140,9,2018,91001.

Joshi P., Kartik V.,Transmission and Control Strategy Optimization for a Parallel Hybrid Electric Micro-Utility Vehicle in Urban Drive Cycles,2018 IEEE Transportation and Electrification Conference and Expo, ITEC 2018,,,2018,576.

Joshi, K., Bhandarkar, U., Samajdar, I., Joshi, S.S.,Microstructural Characterization of Thermal Damage on Silicon Wafers Sliced Using Wire-Electrical Discharge Machining,Journal of Manufacturing Science and Engineering, Transactions of the ASME,140,9,2018,.

Kamaliya, B., Mote, R.G., Aslam, M., Fu, J.,Enhanced light trapping by focused ion beam (FIB) induced self-organized nanoripples on germanium (100) surface,APL Materials,6,3,2018,.

Kanan L.F., Vicharapu B., Fernando A., Bueno B., Clarke T., De A.,Friction hydro-pillar processing of a high carbon steel: Joint structure and properties,Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science,49,2,2018,699.

Kangude P., Bhatt D., Srivastava A.,Experiments on the effects of nanoparticles on subcooled nucleate pool boiling,Physics of Fluids,30,5,2018,57105.

Kannojia H.K., Sharma S.K., Dixit P.,Void Formation and Intermetallic Growth in Pulse Electrodeposited Cu-Sn Layers for MEMS Packaging,Journal of Electronic Materials,,,2018,.

Kant A., Bhandakkar T.K., Medhekar N.V.,Stress enhanced calcium kinetics in a neuron,Biomechanics and Modeling in Mechanobiology,17,1,2018,169.

Kapil S., Joshi P., Kulkarni P.M., Negi S., Kumar R., Karunakaran K.P.,Elimination of support mechanism in additive manufacturing through substrate tilting,Rapid Prototyping Journal,24,7,2018,1155.

Khan M.H., Sooraj P., Sharma A., Agrawal A.,Flow around a cube for Reynolds numbers between 500 and 55,000,Experimental Thermal and Fluid Science,93,,2018,257.

Khandagale P., Bhakar G., Kartik V., Joshi S.S.,Modelling time-domain vibratory deflection response of thin-walled cantilever workpieces during flank milling,Journal of Manufacturing Processes,33,,2018,278.

Kishor V., Singh S., Srivastava A.,Investigation of convective heat transfer phenomena in differentially-heated vertical closed cavity: Whole field experiments and numerical simulations,Experimental Thermal and Fluid Science,99,,2018,71.

Krishnan H., Agrawal A., Sharma A., Thompson M., Sheridan J.,Characteristics of force coefficients and energy transfer for vortex shedding modes of a square cylinder subjected to inline excitation,Journal of Fluids and Structures,81,,2018,270.

Kukreja A., Mane H. D., Dhanda M., Pande, S. S., Voxel based strategy for efficient CNC Machining, 7th International and 28th All India Manufacturing Technology, Design and Research conference, Anna University, India, December 13th to 15th, 2018

Kulkarni D.R., Mujumdar S.S., Kapoor S.G.,Study of Film Formation on Grooved Tools in an Atomization-Based Cutting Fluid Delivery System for Titanium Machining,Journal of Manufacturing Science and Engineering, Transactions of the ASME,140,4,2018,41007.

Kulkarni S., Guha A.,Equation-based domain knowledge utilization into neural network structure and learning,Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering,232,10,2018,1275.

Kumar A, Singh AK, Shrivastava A, Mishra S, Narasimhan K., Failure prediction in incremental sheet forming based on Lemaitre damage model., Journal of Physics: Conference Series, 1063, , 2018, ,

Kumar A., Saha S.K.,Latent heat thermal storage with variable porosity metal matrix: A numerical study,Renewable Energy,125,,2018,962.

Kumar A., Singh A.K., Shrivastva A., Mishra S., Narasimhan K.,Failure prediction in incremental sheet forming based on Lemaitre damage model,Journal of Physics: Conference Series,1063,1,2018,12152.

Kumar S., Grover R.B., Yadav H., Vijayan P.K., Kannan U., Agrawal A.,Experimental and numerical investigation on suppression of thermal stratification in a water-pool: PIV measurements and CFD simulations,Applied Thermal Engineering,138,,2018,686.

Kumar V., Srivastava A., Karagadde S.,Real-Time Observations of Density Anomaly Driven Convection and Front Instability during Solidification of Water,Journal of Heat Transfer,140,4,2018,42503.

Kumar, Manish; Bhardwaj, Rajneesh;,A combined computational and experimental investigation on evaporation of a sessile water droplet on a heated hydrophilic substrate,International Journal of Heat and Mass Transfer,122,,2018,1223-1238.

Kumar, Virkeshwar; Srivastava, Atul; Karagadde, Shyamprasad;,Real-Time Observations of Density Anomaly Driven Convection and Front Instability During Solidification of Water,Journal of Heat Transfer,140,4,2018,42503.

Kumari M., Kulkarni M.S.,A unified index for proactive shop floor control,International Journal of Advanced Manufacturing Technology,,,2018,.

Lad P., Kartik V.,Stability transitions of an axially moving string subjected to a distributed follower force,Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences,474,2213,2018,.

Lalwani, Anand; Awate, Swapnil; Chowdhury, Arindrajit; Sreedhara, Sheshadri;,Conversion of a single-cylinder internal combustion engine to dual-mode homogeneous charge compression ignition engine,Clean Technologies and Environmental Policy,in press,,2018,.

Laxmi V., Tripathi S., Joshi S.S., Agrawal A.,Microfluidic Techniques for Platelet Separation and Enrichment,Journal of the Indian Institute of Science,98,2,2018,185.

Lodh A., Tewary U., Singh R.P., Tak T.N., Prakash A., Alankar A., Guruprasad P.J., Samajdar I.,Orientation-Dependent Developments in Misorientation and Residual Stress in Rolled Aluminum: The Defining Role of Dislocation Interactions,Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science,,,2018,.

Lyamina E.A., Kalenova N.V., Date P.P.,A stationary bulk planar ideal flow solution for the double shearing model,Journal of Physics: Conference Series,991,1,2018,12053.

M. I. Saidaminov, J. Kim, A. Jain, R. Q. Bermudez, H. Tan, et. al, “Suppression of atomic vacancies via incorporation of isovalent small ions to increase the stability of halide perovskite solar cells in ambient air” Nature Energy 3, 648 (2018).

Maity S., Kartik V., Sahu P.P., Swain P.K., Bhunia C.T., Debnath S.,Unavoidable front contact model of Si solar cell through a generalized effective medium approximation approach,Sadhana - Academy Proceedings in Engineering Sciences,43,3,2018,.

Majumdar R., Saha S.K., Singh S.,Evaluation of transient characteristics of medium temperature solar thermal systems utilizing thermal stratification,Applied Energy,224,,2018,69.

Majumdar R., Singh S., Saha S.K.,Quasi-steady state moving boundary reduced order model of two-phase flow for ORC refrigerant in solar-thermal heat exchanger,Renewable Energy,126,,2018,830.

Makwana P., Shome M., Goecke S.-F., De A.,Fast responsive control of current and voltage waveforms for gas metal arc brazing of thin zinc-coated steel sheets,Journal of Materials Processing Technology,254,,2018,171.

Malik P.K., Rajput R., Guha A., Seshu P.,Motion Synthesis in Tensegrity Mechanisms,2018 International Conference on Reconfigurable Mechanisms and Robots, ReMAR 2018 - Proceedings,,,2018,.

Malik P.K., Rajput R., Guha A., Seshu P.,Motion Synthesis in Tensegrity Mechanisms,2018 International Conference on Reconfigurable Mechanisms and Robots, ReMAR 2018 - Proceedings,,,2018,8449888.

Mankodi T.K., Bhandarkar U.V., Puranik B.P.,Collision induced dissociation cross-section for high energy N2-O2 collisions,Chemical Physics Letters,706,,2018,1.

Mankodi T.K., Bhandarkar U.V., Puranik B.P.,Cross-sections for O2 + N system using the QCT method,Chemical Physics Letters,704,,2018,21.

Mankodi T.K., Bhandarkar U.V., Puranik B.P.,Dissociation cross section for high energy O2-O2 collisions,Journal of Chemical Physics,148,14,2018,.

Mankodi T.K., Bhandarkar U.V., Puranik B.P.,Global potential energy surface of ground state singlet spin O4,Journal of Chemical Physics,148,7,2018,.

Mankodi, T.K., Bhandarkar, U.V., Puranik, B.P.,Collision induced dissociation cross-section for high energy N<inf>2</inf>-O<inf>2</inf>collisions,Chemical Physics Letters,706,,2018,1.

Mankodi, T.K., Bhandarkar, U.V., Puranik, B.P.,Cross-sections for O<inf>2</inf> + N system using the QCT method,Chemical Physics Letters,704,,2018,21.

Mankodi, T.K., Bhandarkar, U.V., Puranik, B.P.,Dissociation cross section for high energy O<inf>2</inf>-O<inf>2</inf>collisions,Journal of Chemical Physics,148,14,2018,.

Mankodi, T.K., Bhandarkar, U.V., Puranik, B.P.,Global potential energy surface of ground state singlet spin O<inf>4</inf>,Journal of Chemical Physics,148,7,2018,.

Mittal R.K., Kulkarni S.S., Singh R.,Characterization of lubrication sensitivity on dynamic stability in high-speed micromilling of Ti–6Al–4V via a novel numerical scheme,International Journal of Mechanical Sciences,142-143,,2018,51.

Mittal R.K., Kulkarni S.S., Singh R.K.,Multiple Degree of Freedom Rotordynamics based Stability Modeling in High-speed Micromilling of Ti-6Al-4V,Procedia Manufacturing,26,,2018,607.

Mittal R.K., Singh R.K., Kulkarni S.S., Kumar P., Barshilia H.C.,Characterization of anti-abrasion and anti-friction coatings on micromachining response in high speed micromilling of Ti-6Al-4V,Journal of Manufacturing Processes,34,,2018,303.

More R., Balasubramanian S.,Mixing dynamics in double-diffusive convective stratified fluid layers,Current Science,114,9,2018,1953.

Mujumdar S.S., Curreli D., Kapoor S.G.,Effect of dielectric conductivity on micro-electrical discharge machining plasma characteristics using optical emission spectroscopy,Journal of Micro and Nano-Manufacturing,6,3,2018,31001.

Mukherjee T., Wei H.L., De A., DebRoy T.,Heat and fluid flow in additive manufacturing – Part II: Powder bed fusion of stainless steel, and titanium, nickel and aluminum base alloys,Computational Materials Science,150,,2018,369.

Mukherjee T., Wei H.L., De A., DebRoy T.,Heat and fluid flow in additive manufacturing—Part I: Modeling of powder bed fusion,Computational Materials Science,150,,2018,304.

Najafi Z., Schwartz B.F., Chandy A.J., Mahajan A.M.,A two-dimensional numerical study of peristaltic contractions in obstructed ureter flows,Computer Methods in Biomechanics and Biomedical Engineering,21,1,2018,22.

Narayan S., Srivastava A., Singh S.,Rainbow schlieren-based direct visualization of thermal gradients around single vapor bubble during nucleate boiling phenomena of water,International Journal of Multiphase Flow,,,2018,.

Narayan S., Srivastava A., Singh S.,Rainbow schlieren-based investigation of heat transfer mechanisms during isolated nucleate pool boiling phenomenon: Effect of superheat levels,International Journal of Heat and Mass Transfer,120,,2018,127.

Nauhria Y., Kulkarni M.S., Pandey S.,Development of Strategic Value Chain Framework for Indian Car Manufacturing Industry,Global Journal of Flexible Systems Management,19,,2018,21.

Nimdeo Y.M., Srivastava A.,Understanding the temperature dependence of thermo-physical properties of nanofluid suspensions using non-intrusive dynamic measurements,Experimental Thermal and Fluid Science,94,,2018,109.

Nitesh P. Yelve, Peter W. Tse, and Faeez Masurkar, Theoretical and experimental evaluation of material nonlinearity in metal plates using Lamb waves, Structural Control and Health Monitoring, 25, 6, 2018, DOI:10.1002/stc.2164, e2164

Nuttall, A.L., Ricci, A.J., Burwood, G., Harte, J.M., Stenfelt, S., Cayé-Thomasen, P., Ren, T., Ramamoorthy, S., Zhang, Y., Wilson, T., Lunner, T., Moore, B.C.J., Fridberger, A.,A mechanoelectrical mechanism for detection of sound envelopes in the hearing organ,Nature Communications,9,1,2018,.

P A Davidson, A Ranjan,Are planetary dynamos driven by helical waves?,Journal of Plasma Physics,84,3,2018,.

P A Davidson, A Ranjan,On the spatial segregation of helicity by inertial waves in dynamo simulations and planetary cores,Journal of Fluid Mechanics,851,,2018,268-287.

P. Jain, D. Bansal, G. Sharma, A. Bhattacharya, B. Ingale, O. Delaire, R. Chatterjee,Observation of low-temperature metastable states in complex CaMn7O12,Journal of Physics: Condensed Matter,30,,2018,75801.

P. Shah and V. Sangwan, "Study of Symmetric Solutions of an Underactuated Bipedal Robot,'' Proceedings of ASME International Mechanical Engineering Congress and Exposition, Pittsburgh-USA, 2018.

Pant C.S., Bhattacharya A.,Evaluation of an energy consistent entrainment model for volumetrically forced jets using large eddy simulations,Physics of Fluids,30,10,2018,105107.

Parayil D.V., Kulkarni S.S., Pawaskar D.N.,A generalized model for thermoelastic damping in beams with mid-plane stretching nonlinearity,International Journal of Mechanical Sciences,135,,2018,582.

Patel C.G., Sarkar S., Saha S.K.,Mixed convective vertically upward flow past side-by-side square cylinders at incidence,International Journal of Heat and Mass Transfer,127,,2018,927.

Patil N.D., Bhardwaj R., Sharma A.,Self-Sorting of Bidispersed Colloidal Particles Near Contact Line of an Evaporating Sessile Droplet,Langmuir,34,40,2018,12058.

Patil V.H., Manik D.N.,Sensitivity analysis of a two-plate coupled system in the statistical energy analysis (SEA) framework,Structural and Multidisciplinary Optimization,,,2018,.

Patil, Nagesh D; Bhardwaj, Rajneesh; Sharma, Atul;,Self-sorting of Bi-dispersed Colloidal Particles near Contact Line of an Evaporating Sessile Droplet,Langmuir,,,2018,.

Patil, V.H., Manik, D.N.,Sensitivity analysis of a two-plate coupled system in the statistical energy analysis (SEA) framework,Structural and Multidisciplinary Optimization,,,2018,.

Patil, V.S., Vedula, R.P.,Local heat transfer for jet impingement onto a concave surface including injection nozzle length to diameter and curvature ratio effects,Experimental Thermal and Fluid Science,92,,2018,375.

Pattanayak A., Rana G., Duttagupta S.P., Gandhi P.S., Deshmukh A.A.,Design of a 5 GHz reflectarray with reduced size unit cell and extremely low phase sensitivity,Radioengineering,27,3,2018,718.

Paul S., Singh R., Yan W., Samajdar I., Paradowska A., Thool K., Reid M.,Critical deposition height for sustainable restoration via laser additive manufacturing,Scientific Reports,8,1,2018,14726.

Phalke, V., Visaria, M., Krishnan, S., Alankar, A., Analyses of thermal stresses and strains in yttriastabilized zirconia (YSZ) thermal barrier coating, 5th International Conference on Computational Methods for Thermal Problems, THERMACOMP 2018, p. 584-587

Phapale K., Ahire A., Singh R.,Experimental characterization and finite element modeling of critical thrust force in cfrp drilling,Machining Science and Technology,22,2,2018,249.

Prasad M., Gopika V., Sridharan A., Parida S., Gaikwad A.J.,Hougaard process stochastic model to predict wall thickness in Flow Accelerated Corrosion,Annals of Nuclear Energy,117,,2018,247.

Prasad M., Gopika V., Sridharan A., Parida S.,Pipe wall thickness prediction with CFD based mass transfer coefficient and degradation feedback for flow accelerated corrosion,Progress in Nuclear Energy,107,,2018,205.

R. Bhirangi and V. Sangwan, "Motion Planning for Handspring Maneuver using a Two Link Robot," Proceedings of ASME International Mechanical Engineering Congress and Exposition, Pittsburgh-USA, 2018.

R.R-Dehkharghani, D. Bansal, A. Aref, and G. Dargush,Analysis and optimal design of stress wave intensity attenuation in layered structures,International Journal of Structural Stability and Dynamics,18,,2018,1850015.

Raj Desai, Anirban Guha, P Seshu, Multibody Biomechanical Modelling of Human Body Response to Direct and Cross Axis Vibration, Raj Desai, Anirban Guha and P. Seshu, Procedia Computer Science, 2018, 133, pp. 494-501., Multibody Biomechanical Modelling of Human Body Response to Direct and Cross Axis Vibration, , , 2018, ,

Raj, Vinay C; Kuntikana, Pramod; Sreedhara, S; Prabhu, SV;,Separation of heat transfer components from impinging methane diffusion flames,International Journal of Heat and Mass Transfer,126,,2018,123-138.

Ramamoorthy, S., Krishnan, S.,Towards thermal-acoustic co-design of noise-reducing heat sinks,IEEE Transactions on Components, Packaging and Manufacturing Technology,8,8,2018,.

Ramamoorthy, S., Krishnan, S.,Towards thermal-acoustic co-design of noise-reducing heat sinks,IEEE Transactions on Components, Packaging and Manufacturing Technology,8,8,2018,1411.

Ramamoorthy, S.,Reverse-engineering the cochlear amplifier,AIP Conference Proceedings,1965,,2018,.

Rane, M.V., Uphade, D.B.,Heat Pump for Energy-Efficient Sugarcane Juice Freeze Pre-concentration,Sugar Tech,20,5,2018,591.

Rath A., Singh N., Agrawal A.,A perturbation-based solution of Burnett equations for gaseous flow in a long microchannel,Journal of Fluid Mechanics,844,,2018,1038.

Raul A., Jain M., Gaikwad S., Saha S.K.,Modelling and experimental study of latent heat thermal energy storage with encapsulated PCMs for solar thermal applications,Applied Thermal Engineering,143,,2018,415.

Raul A.K., Bhavsar P., Saha S.K.,Experimental study on discharging performance of vertical multitube shell and tube latent heat thermal energy storage,Journal of Energy Storage,20,,2018,279.

Raut, D., Narayan, R.L., Tandaiya, P., Ramamurty, U.,Temperature-dependence of mode I fracture toughness of a bulk metallic glass,Acta Materialia,144,,2018,325.

Ravi Kumar N.V., Gokhale A.A.,Role of Temperature and SiCP Parameters in Stability and Quality of Al-Si-Mg/SiC Foams,JOM,70,6,2018,823.

Ravi, J.T., Nidhan, S., Muthu, N., Maiti, S.K.,Analytical and experimental studies on detection of longitudinal, L and inverted T cracks in isotropic and bi-material beams based on changes in natural frequencies,Mechanical Systems and Signal Processing,101,,2018,67.

S. Muy, J.C. Bachman, L. Giordano, H.-H. Chang, D.L. Abernathy, D. Bansal, O. Delaire, S. Hori, R. Kanno, F. Maglia, S. Lupart, P. Lamp, and Y.S.-Horn,Tuning Mobility and Stability of Lithium Ion Conductors based on Lattice Dynamics,Energy & Environmental Science,11,,2018,850-859.

Sahu J., Chakrabarty S., Raghavan R., Mishra S.,Investigations of size effect on formability and microstructure evolution in SS304 thin foils,Journal of Strain Analysis for Engineering Design,53,7,2018,517.

Sahu S.N., Gokhale A.A., Mehra A.,Effect of Foaming Temperature on Bubble Size Distribution of Liquid Aluminium Foam: Modeling and Experimental Studies,Transactions of the Indian Institute of Metals,71,5,2018,1161.

Sankaranarayanan A., Mallick L., Kumbhakarna N.R.,A numerical and experimental study of the decomposition pathways of guanidinium nitrate,Journal of Thermal Analysis and Calorimetry,131,1,2018,427.

Savitha U., Srinivas V., Jagan Reddy G., Gokhale A.A., Sundararaman M.,Additive laser deposition of YSZ on Ni base superalloy for thermal barrier application,Surface and Coatings Technology,354,,2018,257.

Saxena A., Kishor V., Singh S., Srivastava A.,Experimental and numerical study on the onset of natural convection in a cavity open at the top,Physics of Fluids,30,5,2018,57102.

Saxena A., Singh S., Srivastava A.,Flow and heat transfer characteristics of an open cubic cavity with different inclinations,Physics of Fluids,30,8,2018,87101.

Shah DS, Middleton C, Gurdezi S, Horwitz M, Kedgley AE, Alterations to wrist tendon forces following flexor carpi radialis or ulnaris sacrifice: A cadaveric simulator study, Journal of Hand Surgery European Volume, 43, 8, 2018, 10.1177/1753193418783176, 886-888

Shah DS, Middleton C, Gurdezi S, Horwitz M, Kedgley AE, The importance of abductor pollicis longus in wrist motions: A physiological wrist simulator study, Journal of Biomechanics, 77, 1, 2018, 10.1016/j.jbiomech.2018.07.011, 218-222

Shah N., Agrawal A., Bhandarkar U.,3D study of temperature drop behavior of subsonic rarefied gas flow in microchannel,Numerical Heat Transfer; Part A: Applications,73,9,2018,654.

Shah N., Gavasane A., Agrawal A., Bhandarkar U.,Comparison of Various Pressure Based Boundary Conditions for Three-Dimensional Subsonic DSMC Simulation,Journal of Fluids Engineering, Transactions of the ASME,140,3,2018,.

Shah P.R., Gaitonde U.N., Ganesh A.,Influence of soy-lecithin as bio-additive with straight vegetable oil on CI engine characteristics,Renewable Energy,115,,2018,685.

Shah, N., Agrawal, A., Bhandarkar, U.,3D study of temperature drop behavior of subsonic rarefied gas flow in microchannel,Numerical Heat Transfer; Part A: Applications,73,9,2018,654.

Shah, N., Gavasane, A., Agrawal, A., Bhandarkar, U.,Comparison of Various Pressure Based Boundary Conditions for Three-Dimensional Subsonic DSMC Simulation,Journal of Fluids Engineering, Transactions of the ASME,140,3,2018,.

Shahane S., Mujumdar S., Kim N., Priya P., Aluru N., Ferreira P., Kapoor S.G., Vanka S.,Virtually-guided certification with uncertainty quantification applied to die casting,ASME 2018 Verification and Validation Symposium, VVS 2018,,,2018,.

Shaikh J., Sharma A., Bhardwaj R.,On comparison of the sharp-interface and diffuse-interface level set methods for 2D capillary or/and gravity induced flows,Chemical Engineering Science,176,,2018,77.

Shaikh, Javed; Sharma, Atul; Bhardwaj, Rajneesh;,On comparison of the sharp-interface and diffuse-interface level set methods for 2D capillary or/and gravity induced flows,Chemical Engineering Science,176,,2018,77-95.

Sharma H., John K., Gaddam A., Navalkar A., Maji S.K., Agrawal A.,A magnet-actuated biomimetic device for isolating biological entities in microwells,Scientific Reports,8,1,2018,.

Sharma R.K., Bind A.K., Avinash G., Singh R.N., Tewari A., Kashyap B.P.,Effect of radial hydride fraction on fracture toughness of CWSR Zr-2.5%Nb pressure tube material between ambient and 300 °C temperatures,Journal of Nuclear Materials,508,,2018,546.

Sharma R.K., Tewari A., Singh R.N., Kashyap B.P.,Optimum shape and orientation of δ-hydride precipitate in α-zirconium matrix for different temperatures,Journal of Alloys and Compounds,742,,2018,804.

Sharma S., Pingulkar H., Chowdhury A., Kumar S.,A new emission reduction approach in MILD combustion through asymmetric fuel injection,Combustion and Flame,193,,2018,61.

Shimpi R.P., Shetty R.A., Guha A.,A single variable shear deformable nonlocal theory for transversely loaded micro- and nano-scale rectangular beams,Sadhana - Academy Proceedings in Engineering Sciences,43,5,2018,73.

Shinde V., Jha J., Tewari A., Miashra S.,Modified rainflow counting algorithm for fatigue life calculation,Lecture Notes in Mechanical Engineering,,9790000000000,2018,381.

Shrigondekar H., Chowdhury A., Prabhu S.V.,Characterization of a simplex water mist nozzle and its performance in extinguishing liquid pool fire,Experimental Thermal and Fluid Science,93,,2018,441.

Shyamala B., Lal S., Chowdhury A., Namboothiri I.N.N., Kumbhakarna N.,Cubane decomposition pathways – A comprehensive study,Combustion and Flame,197,,2018,111.

Singh D.K., Maiti S.K., Bhandakkar T.K., Raman R.K.S.,Cohesive zone based axisymmetric modelling of hydrogen-assisted cracking in a circumferentially notched tensile specimen,International Journal of Hydrogen Energy,43,27,2018,12530.

Singh K.K., Kulkarni S.S., Kartik V., Singh R.,A free interface component mode synthesis approach for determining the micro-end mill dynamics,Journal of Micro and Nano-Manufacturing,6,3,2018,31005.

Singh K.K., Singh R.,Chatter stability prediction in high-speed micromilling of Ti6Al4V via finite element based microend mill dynamics,Advances in Manufacturing,6,1,2018,95.

Singh S.G., Bhide R.R., Duttagupta S.P., Sridharan A., Agrawal A.,Experimental study of water boiling in microchannel,Advances in Multiphase Flow and Heat Transfer,3,,2018,188.

Singh Y., Shah S.P., Gandhi P.S.,High resolution flexible 4-PPR U-base planar parallel microstage robotic manipulator,IOP Conference Series: Materials Science and Engineering,402,1,2018,12034.

Singh, C.P, Taibani, A, Alankar, A., Visaria, M., Krishnan, S., Inverse design of thermal barrier coatings for IC engines applications, 5th International Conference on Computational Methods for Thermal Problems, THERMACOMP 2018, p. 207-210

Singh, D.K., Maiti, S.K., Bhandakkar, T.K., Raman, R.K.S.,Cohesive zone based axisymmetric modelling of hydrogen-assisted cracking in a circumferentially notched tensile specimen,International Journal of Hydrogen Energy,43,27,2018,12530.

Sonawane H., Joshi S.S.,Modeling of chip geometry in ball-end milling of superalloy using strains in deformed chip (SDC) approach,International Journal of Machine Tools and Manufacture,130-131,,2018,49.

Soti, Atul Kumar; Zhao, Jisheng; Thompson, Mark C; Sheridan, John; Bhardwaj, Rajneesh;,Damping effects on vortex-induced vibration of a circular cylinder and implications for power extraction,Journal of Fluids and Structures,81,,2018,289-308.

Sravan K.K., Srivastava A.,Cylindrical coordinate system-based formulation to investigate thermal response of laser-irradiated tissue phantoms using non-fourier heat conduction models,Heat Transfer Research,49,15,2018,1459.

Srinivas Rao S., Srivastava A.,Whole field measurements to understand the effect of nanoparticle concentration on heat transfer rates in a differentially-heated fluid layer,Experimental Thermal and Fluid Science,92,,2018,326.

Srinivasan N., Sunil Kumar B., Kain V., Birbilis N., Joshi S.S., Sivaprasad P.V., Chai G., Durgaprasad A., Bhattacharya S., Samajdar I.,Defining the Post-Machined Sub-surface in Austenitic Stainless Steels,Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science,49,6,2018,2281.

Srivastava A.,Modelling of Laser-Induced Heating of Tissues for Therapeutic Applications,Proceedings of the National Academy of Sciences India Section A - Physical Sciences,88,3,2018,461.

Swami U., Ambekar A., Gondge D., Sreedhara S., Chowdhury A.,Burn rate characterization of desensitized isopropyl nitrate blends,Combustion and Flame,190,,2018,454.

Swami, Umakant; Ambekar, Anirudha; Gondge, Dhananjay; Sreedhara, Sheshadri; Chowdhury, Arindrajit;,Burn rate characterization of desensitized isopropyl nitrate blends,Combustion and Flame,190,,2018,454-466.

Takaddus A.T., Chandy A.J.,A three-dimensional (3D) two-way coupled fluid-structure interaction (FSI) study of peristaltic flow in obstructed ureters,International Journal for Numerical Methods in Biomedical Engineering,34,10,2018,e3122.

Takaddus A.T., Chandy A.J.,A two way fully coupled fluid structure simulation of human ureter peristalsis,Computer Methods in Biomechanics and Biomedical Engineering,,,2018,.

Takaddus A.T., Gautam P., Chandy A.J.,A fluid-structure interaction (FSI)-based numerical investigation of peristalsis in an obstructed human ureter,International Journal for Numerical Methods in Biomedical Engineering,34,9,2018,e3104.

Telrandhe S.V., Bhagyaraj J., Mishra S., Karagadde S.,A new approach to control and optimize the laser surface heat treatment of materials,Journal of Materials Processing Technology,262,,2018,492.

Telrandhe S.V., Jayabalan B., Paul C.P., Mishra S.K.,Microstructural Development Due to Laser Treatment and Its Effect on Machinability of Ti6Al4V Alloy,Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science,49,8,2018,3450.

Thanedar A., Singh R., Joshi S.,Cylindrical Grinding Performance Evaluation,Proceedings of 2018 9th International Conference on Mechanical and Aerospace Engineering, ICMAE 2018,,,2018,579.

Thekkethil N., Sharma A., Agrawal A.,Unified hydrodynamics study for various types of fishes-like undulating rigid hydrofoil in a free stream flow,Physics of Fluids,30,7,2018,.

Thekkethil N., Sharma A., Agrawal A.,Unified hydrodynamics study for various types of fishes-like undulating rigid hydrofoil in a free stream flow,Physics of Fluids,30,7,2018,77107.

Trivedi D.B., Kumar A., Joshi S.S.,Drilling of Titanium Alloy using Heat Sink-based Ice Water Cooling,Procedia Manufacturing,26,,2018,633.

Trivedi D.B., Kumar A., Joshi S.S.,Heat sink approach to improve machinability in dry drilling of titanium alloys,2018 7th International Conference on Industrial Technology and Management, ICITM 2018,2018-January,,2018,37.

Trivedi D.B., Kumar A., Joshi S.S.,Surface integrity analysis in heat sink-based dry drilling of titanium alloy,Materials Today: Proceedings,5,9,2018,19529.

Ul Islam T., Gandhi P.S.,Controlling interfacial flow instability via micro engineered surfaces towards multiscale channel fabrication,ASME 2018 16th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM 2018,,,2018,.

Unni S., Bokade V., Bhandarkar U., Gopalakrishnan S., Bodi K.,Numerical simulation of two-fluid magnetohydrodynamic channel flows,Numerical Heat Transfer; Part A: Applications,,,2018,.

Unni, S., Bokade, V., Bhandarkar, U., Gopalakrishnan, S., Bodi, K.,Numerical simulation of two-fluid magnetohydrodynamic channel flows,Numerical Heat Transfer; Part A: Applications,,,2018,.

V. Sangwan and S.K. Agrawal, "Effects of Viscous Damping on Differential Flatness-Based Control for a Class of Under-Actuated Planar Manipulators," IEEE Control Systems Letters, vol. 2, no. 1, pp. 67-72, 2018.

Vadnala S., Paul N., Agrawal A., Singh S.G.,Enhanced infrared sensing properties of vanadium pentoxide nanofibers for bolometer application,Materials Science in Semiconductor Processing,81,,2018,82.

Valsala V., Singh S., Balasubramanian S.,A Modeling Study of Interannual Variability of Bay of Bengal Mixing and Barrier Layer Formation,Journal of Geophysical Research: Oceans,123,6,2018,3962.

Vasu T.S., Bhandakkar T.K.,Plane strain cylindrical indentation of functionally graded half-plane with exponentially varying shear modulus in the presence of residual surface tension,International Journal of Mechanical Sciences,135,,2018,158.

Vemulapally A., Kali R., Bhandakkar T.K., Mukhopadhyay A.,Transformation Plasticity Provides Insights into Concurrent Phase Transformation and Stress Relaxation Observed during Electrochemical Li Alloying of Sn Thin Film,Journal of Physical Chemistry C,122,29,2018,16561.

Venugopal A., Agrawal A., Prabhu S.V.,Vortex dynamics of a trapezoidal bluff body placed inside a circular pipe,Journal of Turbulence,19,1,2018,1.

Vundru C., Paul S., Singh R., Yan W.,Numerical analysis of multi-layered laser cladding for die repair applications to determine residual stresses and hardness,Procedia Manufacturing,26,,2018,952.

Vyas A., Mishra B., Agrawal A., Srivastava A.,Non-intrusive investigation of flow and heat transfer characteristics of a channel with a built-in circular cylinder,Physics of Fluids,30,3,2018,.

Vyas A., Mishra B., Agrawal A., Srivastava A.,Non-intrusive investigation of flow and heat transfer characteristics of a channel with a built-in circular cylinder,Physics of Fluids,30,3,2018,33602.

Wagh Y.R., Paul S., Gupta N., Singh R.K.,Metallurgical and tribological investigation of micro-scale fibre laser-based surface hardening,International Journal of Mechatronics and Manufacturing Systems,11,43161,2018,120.

X. Gong, O. Voznyy, A. Jain, W. Liu, R. Sabatini, et. al, “Electron−phonon interaction in efficient perovskite blue emitters” Nature Materials 17, 550 (2018).

Yadav H., Agrawal A.,Effect of pulsation on the near flow field of a submerged water jet,Sadhana - Academy Proceedings in Engineering Sciences,43,3,2018,.

Yadav H., Agrawal A.,Effect of vortical structures on velocity and turbulent fields in the near region of an impinging turbulent jet,Physics of Fluids,30,3,2018,.

Yadav H., Agrawal A.,Self-similar behavior of turbulent impinging jet based upon outer scaling and dynamics of secondary peak in heat transfer,International Journal of Heat and Fluid Flow,72,,2018,123.

A Ranjan,Segregation of helicity in inertial wave packets,Physical review fluids,2,33801,2017,.

A. Jain, O. Voznyy, and E. H. Sargent, “High-throughput screening of lead-free perovskite-like materials for optoelectronic applications.” The Journal of Physical Chemistry C 121, 7183 (2017).

A. Jain†, O. Voznyy†, M. Korkusinski, P. Hawrylak, and E. H. Sargent, “Ultrafast Carrier Trapping in Thick- Shell Colloidal Quantum Dots” The Journal of Physical Chemistry Letters 8, 3179 (2017).

A. Takshak, T. Roy, P. Tandaiya and A. Kunwar, Effect of fuel concentration and force on collective transport by a team of dynein motors,Protein Science,26,,2017,10.1002/pro.3065,186

Adhikari S., Sayre A., Chandy A.J.,In situ adaptive tabulation (ISAT) for combustion chemistry in a network of perfectly stirred reactors (PSRs),Computers and Chemical Engineering,97,,2017,124.

Alexandrov S., Date P.,Plane strain bending under tension as an ideal flow process in pressure-dependent plasticity,MATEC Web of Conferences,108,,2017,1001.

Alexandrov S., Pirumov A., Date P.P.,Existence of Nonsteady Planar Ideal Flows in Anisotropic Plasticity,IOP Conference Series: Materials Science and Engineering,272,1,2017,12026.

Ambad P.M., Kulkarni M.S.,A goal programming approach for multi-objective warranty optimization,International Journal of Systems Assurance Engineering and Management,8,4,2017,842.

Anandita S., Mote R.G., Singh R.,Stochastic analysis of microgrinding tool topography and its role in surface generation,Journal of Manufacturing Science and Engineering, Transactions of the ASME,139,12,2017,121013.

Anandita S., Mote R.G., Singh R.,Surface generation via scallop overlap analysis during grinding,International Journal of Advanced Manufacturing Technology,,,2017,1.

Anandita, S., Mote, R.G., Singh, R.,Stochastic analysis of microgrinding tool topography and its role in surface generation,Journal of Manufacturing Science and Engineering, Transactions of the ASME,139,12,2017,.

Anandita, S., Mote, R.G., Singh, R.,Surface generation via scallop overlap analysis during grinding,International Journal of Advanced Manufacturing Technology,,,2017,1.

Aneesh A.M., Sharma A., Srivastava A., Chaudhuri P.,Thermo-hydraulic performance of zigzag, wavy, and serpentine channel based PCHEs,Lecture Notes in Mechanical Engineering,,,2017,507.

Asif Tanveer, Deepak Marla, and Shiv G. Kapoor,A Thermal Model to Predict Tool Temperature in Machining of Ti6Al4V Alloy With an Atomization-Based Cutting Fluid Spray System,Journal of Manufacturing Science and Engineering,139,7,2017,71016.

Azeem, MA; Lee, PD; Phillion, AB; Karagadde, S; Rockett, P; Atwood, RC; Courtois, L; Rahman, KM; Dye, D;,Revealing dendritic pattern formation in Ni, Fe and Co alloys using synchrotron tomography,Acta Materialia,128,,2017,241-248.

Bailoor, Shantanu; Annangi, Aditya; Seo, Jung Hee; Bhardwaj, Rajneesh;,Fluid–structure interaction solver for compressible flows with applications to blast loading on thin elastic structures,Applied Mathematical Modelling,52,,2017,470-492.

Barnwal V.K., Raghavan R., Tewari A., Narasimhan K., Mishra S.K.,Effect of microstructure and texture on forming behaviour of AA-6061 aluminium alloy sheet,Materials Science and Engineering A,679,,2017,56.

Bhagwat A., Sridharan A.,Numerical investigation on an obliquely impinging circular air jet on a heated flat plate at small jet plate spacing,Lecture Notes in Mechanical Engineering,,,2017,1663.

Bhagwat A.B., Sridharan A.,Numerical simulation of oblique air jet impingement on a heated flat plate,Journal of Thermal Science and Engineering Applications,9,1,2017,11017.

Bhardwaj R., Sharma A.,Numerical methods and computational tools: Immersed boundary method for fluid-structure interaction simulations,CRC Handbook of Thermal Engineering, Second Edition,,,2017,1507.

Bhardwaj, Rajneesh; Bhattacharya, Amitabh; Karagadde, Shyamprasad; Agrawal, Amit; Hrisheekesh, K; Kulkarni, Salil S; Sharma, Atul;,Numerical Methods and Computational Tools,CRC Handbook of Thermal Engineering, Second Edition,,,2017,1441-1558.

Bhattacharya A., Banerjee J.,Fluid Mechanics and Fluid Power (FMFP),Sadhana - Academy Proceedings in Engineering Sciences,42,4,2017,447.

Bhattacharya A.,Numerical methods and computational tools: Large eddy simulation for wall-bounded flows,CRC Handbook of Thermal Engineering, Second Edition,,,2017,1545.

Bhavsar V.N., Jha J.S., Jhala G., Joseph A., Mishra S., Tewari A.,Characterization of TI-6AL-4V alloy modified by plasma nitriding process,ASME 2017 Gas Turbine India Conference, GTINDIA 2017,2,,2017,.

Bhojwani V., Inamdar A., Lele M., Tendolkar M., Atrey M., Bapat S., Narayankhedkar K.,Opposed piston linear compressor driven two-stage Stirling Cryocooler for cooling of IR sensors in space application,Cryogenics,83,,2017,71.

Bhopale N.N., Pawade R.S., Joshi S.S.,Surface quality analysis in ball end milling of Inconel 718 cantilevers by response surface methodology,Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture,231,4,2017,628.

Bhusnoor, S.S., Bhandarkar, U.V., Sethi, V., Parikh, P.P.,Thermophoresis deposition studies for NaCl and diesel exhaust particulate matter under laminar flow,Journal of Aerosol Science,105,,2017,84.

Biradar S., Jha J.S., Mishra S., Tewari A.,Fatigue crack growth retardation in titanium alloy,ASME 2017 Gas Turbine India Conference, GTINDIA 2017,2,,2017,.

Buchibabu V., Reddy G.M., De A.,Probing torque, traverse force and tool durability in friction stir welding of aluminum alloys,Journal of Materials Processing Technology,241,,2017,86.

C. Luo, D. Bansal, J. Li, D. Viehland, B. Winn, Y. Ren, X. Li, H. Luo, and O. Delaire,Neutron and x-ray scattering study of phonon dispersion and diffuse scattering in (Na,Bi)TiO3- xBaTiO3 single crystals near the morphotropic phase boundary,Physical Review B,96,,2017,174108.

Carpenter J.R., Guha A., Heifetz E.,A physical interpretation of the wind-wave instability as interacting waves,Journal of Physical Oceanography,47,6,2017,1441.

Chaudhari M., Agrawal A.,Applications: Heat transfer in presence of synthetic jets,CRC Handbook of Thermal Engineering, Second Edition,,,2017,1153.

Choudhury K., Singh R.K., Narayan S., Srivastava A., Kumar A.,Time-resolved whole field investigation of plasma plume-induced shock wave in liquid media of different densities,Applied Physics B: Lasers and Optics,123,5,2017,163.

Choudhury K., Singh R.K., Ranjan M., Kumar A., Srivastava A.,A novel method for fabrication of size-controlled metallic nanoparticles by laser ablation,Proceedings of SPIE - The International Society for Optical Engineering,10603,,2017,.

D. Bansal, J.L. Niedziela, A.F. May, A. Said, G. Ehlers, D.L. Abernathy, A. Huq, M. Kirkham, H. Zhou, and O. Delaire,Lattice dynamics and thermal transport in multiferroic CuCrO2,Physical Review B,95,,2017,54306.

Dalwani M., Swami U., Chowdhury A.,Experimental determination of ignition delay for hypergolic bipropellants,11th Asia-Pacific Conference on Combustion, ASPACC 2017,2017-December,,2017,.

Damle R.M., Ardhapurkar P.M., Atrey M.D.,Numerical simulation of tubes-in-tube heat exchanger in a mixed refrigerant Joule-Thomson cryocooler,IOP Conference Series: Materials Science and Engineering,171,1,2017,12070.

Das A., Shome M., Goecke S.-F., De A.,Joining of aluminium alloy and galvanized steel using a controlled gas metal arc process,Journal of Manufacturing Processes,27,,2017,179.

Das A., Sinha A., Rao V.R., Jonnalagadda K.N.,Fracture in Microscale SU-8 Polymer Thin Films,Experimental Mechanics,57,5,2017,687.

Das S.R., Dhakal P., Chandy A.J.,Comparison of three rotor designs for rubber mixing using computational fluid dynamics,Tire Science and Technology,45,4,2017,259.

Das S.R., Poudyal H., Chandy A.J.,Numerical investigation of effect of rotor phase angle in partially-filled rubber mixing,International Polymer Processing,32,3,2017,343.

Date P.P., Kasture R.N., Kore A.S.,On the lightweighting of automobile engine components : forming sheet metal connecting rod,Journal of Physics: Conference Series,896,1,2017,12094.

Deka N., Jonnalagadda K.N.,Numerical investigation of crack tip strain localization under cyclic loading in FCC single crystals,International Journal of Fracture,204,1,2017,29.

Desai A.B., Desai K.P., Naik H.B., Atrey M.D.,Optimization of thermoacoustic engine driven thermoacoustic refrigerator using response surface methodology,IOP Conference Series: Materials Science and Engineering,171,1,2017,12132.

Deshmukh V., Kadam R., Joshi S.S.,Removal of alpha case on titanium alloy surfaces using chemical milling,Machining Science and Technology,21,2,2017,257.

Deshpande A., Puranik B.,A numerical investigation of shock propagation in three-dimensional microducts,Shock Waves,27,4,2017,565.

Dev A.A., Atrey M.D., Vanapalli S.,Investigation of the effect of a bend in a transfer line that separates a pulse tube cold head and a pressure wave generator,IOP Conference Series: Materials Science and Engineering,171,1,2017,12065.

Dhakal P., Das S.R., Chandy A.J.,Investigation of fill factor in two-wing rotor mixing of rubber by using computational fluid dynamics,Tire Science and Technology,45,2,2017,144.

Dhakal P., Das S.R., Poudyal H., Chandy A.J.,Numerical simulations of partially-filled rubber mixing in a 2-wing rotor-equipped chamber,Journal of Applied Polymer Science,134,2,2017,.

Dhala S., Mishra S., Alankar A.,Three Dimensional Crystal Plasticity Finite Element Simulation of Notched Tensile Samples of Pseudoelastic NiTi Shape Memory Alloys,Procedia Engineering,173,,2017,786.

Dureja A.K., Sinha R.K., Pawaskar D.N., Seshu P.,Thermomechanical behavior of coolant channel assembly in heavy water reactor under severe plant condition,Journal of Nuclear Engineering and Radiation Science,3,2,2017,.

Dureja A.K., Sinha R.K., Pawaskar D.N., Seshu P.,Thermomechanical behavior of coolant channel assembly in heavy water reactor under severe plant condition,Journal of Nuclear Engineering and Radiation Science,3,2,2017,20905.

Dureja, A.K., Seshu, P., Pawaskar, D.N., Sinha, R.K., Thermomechanical Behavior of Coolant Channel Assembly in Heavy Water Reactor Under Severe Plant Condition, Dureja, A.K., Seshu, P., Pawaskar, D.N., Sinha, R.K., ASME Journal of Nuclear Engineering and Radiation Science, April 2017., ASME Journal of Nuclear Engineering and Radiation Science, , , 2017, ,

Durgaprasad A., Giri S., Lenka S., Kundu S., Mishra S., Chandra S., Doherty R.D., Samajdar I.,Defining a relationship between pearlite morphology and ferrite crystallographic orientation,Acta Materialia,129,,2017,278.

Durgaprasad A., Giri S., Lenka S., Kundu S., Mishra S., Chandra S., Doherty R.D., Samajdar I.,Microstructures and Mechanical Properties of as-Drawn and Laboratory Annealed Pearlitic Steel Wires,Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science,48,10,2017,4583.

Duryodhan V.S., Chatterjee R., Govind Singh S., Agrawal A.,Mixing in planar spiral microchannel,Experimental Thermal and Fluid Science,89,,2017,119.

Duryodhan V.S., Singh S.G., Agrawal A.,Effect of Cross Aspect Ratio on Flow in Diverging and Converging Microchannels,Journal of Fluids Engineering, Transactions of the ASME,139,6,2017,.

Duryodhan V.S., Singh S.G., Agrawal A.,Heat rate distribution in converging and diverging microchannel in presence of conjugate effect,International Journal of Heat and Mass Transfer,104,,2017,1022.

Enayati H., Chandy A.J., Braun M.J., Horning N.,3D large eddy simulation (LES) calculations and experiments of natural convection in a laterally-heated cylindrical enclosure for crystal growth,International Journal of Thermal Sciences,116,,2017,1.

F. Fan†, O. Voznyy†, R. P. Sabatini†, K. T. Bicanic†, M. M. Adachi, et. al, “Continuous-wave lasing in colloidal quantum dot solids enabled by facet-selective epitaxy” Nature 544, 75 (2017).

Faeez A. Masurkar and Nitesh P. Yelve, Lamb wave-based experimental and finite element simulation studies for damage detection in an Aluminium and a composite plate using Geodesic algorithm, International Journal of Acoustics and Vibration, 22, 4, 2017, DOI:10.20855/ijav.2017.22.4486, 413–421

Faeez A. Masurkar and Nitesh P. Yelve, Optimizing location of damage within an enclosed area defined by an algorithm based on the Lamb wave response data, Applied Acoustics, 120, , 2017, DOI:10.1016/j.apacoust.2017.01.014, 98–110

Gabor K.M., Shindle B., Chandy A.J.,CFD investigation of control parameters in a steam contactor used in polymer devolatilization,International Journal of Thermal Sciences,120,,2017,19.

Gabor K.M., Shindle B., Chandy A.J.,CFD simulations of polymer devolatilization in steam contactors,Engineering Applications of Computational Fluid Mechanics,11,1,2017,273.

Gaddam A., Kattemalalawadi B.S., Agrawal A., Joshi S.S.,Demarcating wetting states in textured microchannels under flow conditions by Poiseuille number,Microfluidics and Nanofluidics,21,8,2017,.

Gaddam A., Kattemalalawadi B.S., Agrawal A., Joshi S.S.,Demarcating wetting states in textured microchannels under flow conditions by Poiseuille number,Microfluidics and Nanofluidics,21,8,2017,137.

Gaikwad, Pranit; Kulkarni, Hrishikesh; Sreedhara, S;,Simplified numerical modelling of oxy-fuel combustion of pulverized coal in a swirl burner,Applied Thermal Engineering,124,,2017,734-745.

Gandhi P.S., Deepak S.A., Agrawal P., Kulkarni S.S., Neild A.,Experimental measurement of vibration of liquid droplet at low bond numbers using ESPI,Lecture Notes in Mechanical Engineering,,,2017,1371.

Gandhi P.S., Vyas V.,On the dynamics of tapered vibro-impacting cantilever with tip mass,Journal of Mechanical Science and Technology,31,1,2017,63.

Gaonkar A.K., Kulkarni S.S.,Model order reduction for dynamic simulation of slender beams undergoing large rotations,Computational Mechanics,59,5,2017,809.

Garg, V., Mote, R.G., Fu, J.,FIB fabrication of highly ordered vertical Gaussian pillar nanostructures on silicon,2017 IEEE 17th International Conference on Nanotechnology, NANO 2017,,,2017,707.

Gavasane A., Agrawal A., Pradeep A.M., Bhandarkar U.,Simulation of a temperature drop for the flow of rarefied gases in microchannels,Numerical Heat Transfer; Part A: Applications,71,10,2017,1066.

Gavasane, A., Agrawal, A., Pradeep, A.M., Bhandarkar, U.,Simulation of a temperature drop for the flow of rarefied gases in microchannels,Numerical Heat Transfer; Part A: Applications,71,10,2017,1066.

Ghosh K., Guha A., Duttagupta S.P., Gupta P.K.,A solar PV integrated contoured kite as a hybrid power generating system,India International Conference on Power Electronics, IICPE,2016-November,,2017,8079511.

Ghosh K., Guha A., Duttagupta S.P.,Power generation on a solar photovoltaic array integrated with lighter-than-air platform at low altitudes,Energy Conversion and Management,154,,2017,286.

Gouripriya, S., Tandaiya, P.,Mechanisms of compressive deformation and failure of porous bulk metallic glasses,Modelling and Simulation in Materials Science and Engineering,25,4,2017,.

Goyal M., Chakravarty A., Atrey M.D.,Experimental investigations and validation of two dimensional model for multistream plate fin heat exchangers,Cryogenics,82,,2017,83.

Goyal M., Chakravarty A., Atrey M.D.,Numerical studies on sizing/ rating of plate fin heat exchangers for a modified Claude cycle based helium liquefier/ refrigerator,IOP Conference Series: Materials Science and Engineering,171,1,2017,12091.

Gudibande N., Iyer K.,Numerical simulation of contact melting using the cell-splitting modified enthalpy method,Numerical Heat Transfer, Part B: Fundamentals,71,1,2017,84.

Guha A., Udwadia F.E.,Nonlinear dynamics induced by linear wave interactions in multilayered flows,Journal of Fluid Mechanics,816,,2017,412.

Gupta A., Joshi S.S.,Modelling effect of magnetic field on material removal in dry electrical discharge machining,Plasma Science and Technology,19,2,2017,25505.

H. Tan, A. Jain, O. Voznyy, X. Lan, F. P. G. D. Arquer, et. al, “Efficient and stable solution-processed planar perovskite solar cells via contact passivation” Science 355, 722 (2017).

Halkarni S.S., Sridharan A., Prabhu S.V.,Measurement of local wall heat transfer coefficient in randomly packed beds of uniform sized spheres using infrared thermography (IR) and water as working medium,Applied Thermal Engineering,126,,2017,358.

Haridas D., Srivastava A.,Interferometry-based direct comparison of transport phenomena associated with the growth processes of organic and inorganic crystals,Crystal Research and Technology,52,3,2017,1600358.

Harish N.M., Maniamkot A.J., Balasubramanian S.,Experimental study of boundary effects on buoyant jet dynamics in linearly stratified medium,Lecture Notes in Mechanical Engineering,Part F8,,2017,737.

Hemadri V., Varade V.V., Agrawal A., Bhandarkar U.V.,Rarefied gas flow in converging microchannel in slip and early transition regimes,Physics of Fluids,29,3,2017,.

Hemadri, V., Varade, V.V., Agrawal, A., Bhandarkar, U.V.,Rarefied gas flow in converging microchannel in slip and early transition regimes,Physics of Fluids,29,3,2017,.

Hrisheekesh K., Agrawal A.,Numerical methods and computational tools: Lattice boltzmann method,CRC Handbook of Thermal Engineering, Second Edition,,,2017,1496.

Inamdar S., Ukhande M., Date P., Lomate D., Takale S., Singh R.K.P.,Life prediction of l6 steel using strain-life curve and cyclic stress-strain curve by means of low cycle fatigue testing,IOP Conference Series: Materials Science and Engineering,201,1,2017,12037.

Jadhav M., Chakravarty A., Atrey M.D.,Theoretical study on the efficacy of the cold compressor based cryogenic cycles,IOP Conference Series: Materials Science and Engineering,171,1,2017,12020.

Jadhav R.S., Singh N., Agrawal A.,Force-driven compressible plane Poiseuille flow by Onsager-Burnett equations,Physics of Fluids,29,10,2017,.

Jagad P.I., Puranik B.P., Date A.W.,A numerical analysis of fluid-structure interaction problem with a flow channel embedded in a structural material,Proceedings of the Indian National Science Academy,83,3,2017,655.

Jain M., Kandar T.K., Vhora S.F., Iyer K.N., Prabhu S.V.,Experimental investigation of the 700 MWe containment spray system spray nozzles/system,Atomization and Sprays,27,8,2017,665.

Jain M., Kandar T.K., Vhora S.F., Mohan N., Iyer K.N., Prabhu S.V.,Experimental investigation of iodine removal and containment depressurization in containment spray system test facility of 700 MWe Indian pressurized heavy water reactors,Nuclear Engineering and Design,316,,2017,46.

Jalan P., Vyas A., Srivastava A.,Nonintrusive diagnostics of nanofluids-based natural convection heat transfer over a heated cylinder,Journal of Thermophysics and Heat Transfer,31,3,2017,674.

Jelia P.R., Agrawal A., Singh R.K., Joshi S.S.,Design of textured surfaces for super-hydrophobicity,Sadhana - Academy Proceedings in Engineering Sciences,42,11,2017,1915.

Jha J.S., Tewari A., Mishra S., Toppo S.,Constitutive Relations for Ti-6Al-4V Hot Working,Procedia Engineering,173,,2017,755.

Jithin S., Bhandarkar U.V., Joshi S.S.,Analytical Simulation of Random Textures Generated in Electrical Discharge Texturing,Journal of Manufacturing Science and Engineering, Transactions of the ASME,139,11,2017,111002.

Jithin, S., Bhandarkar, U.V., Joshi, S.S.,Analytical Simulation of Random Textures Generated in Electrical Discharge Texturing,Journal of Manufacturing Science and Engineering, Transactions of the ASME,139,11,2017,.

Joshi K., Ananya A., Bhandarkar U., Joshi S.S.,Ultra thin silicon wafer slicing using wire-EDM for solar cell application,Materials and Design,124,,2017,158.

Joshi K., Sharma G., Dongre G., Joshi S.S.,Numerical Modelling of Wire-EDM for Predicting Erosion Rate of Silicon,Journal of The Institution of Engineers (India): Series C,98,1,2017,63.

Joshi, K., Ananya, A., Bhandarkar, U., Joshi, S.S.,Ultra thin silicon wafer slicing using wire-EDM for solar cell application,Materials and Design,124,,2017,158.

K. D. Parrish, J. Abel, A. Jain, J. A. Malen, and A. J. H. McGaughey, “Phonon-boundary scattering in nanoporous silicon films: Comparison of Monte Carlo techniques” Journal of Applied Physics 122, 125101 (2017).

Kapil S., Legesse F., Kumar R., Karunakaran K.P.,Hybrid Layered Manufacturing of Turbine Blades,Materials Today: Proceedings,4,8,2017,8837.

Karagadde S., Sharma A.,Numerical methods and computational tools: Numerical methods for multiphase flows,CRC Handbook of Thermal Engineering, Second Edition,,,2017,1524.

Karuriya A.N., Bhandakkar T.K.,Plane strain indentation on finite thickness bonded layer in couple stress elasticity,International Journal of Solids and Structures,108,,2017,275.

Kewalramani G.V., Agrawal A., Saha S.K.,Modeling of microchannel heat sinks for electronic cooling applications using volume averaging approach,International Journal of Heat and Mass Transfer,115,,2017,395.

Khan H.H., Aneesh A.M., Sharma A., Srivastava A., Chaudhuri P.,CFD study on thermal hydraulic performance of a wavy channel based PCHE model,Lecture Notes in Mechanical Engineering,,,2017,497.

Khandagale P., Kartik V., Joshi S.,Forced vibration response of a micro-cantilever beam with moving loads,2017 International Conference on Advances in Mechanical, Industrial, Automation and Management Systems, AMIAMS 2017 - Proceedings,,,2017,220.

Khaple S., Prasad V.V.S., Golla B.R., Baligidad R.G., Gokhale A.A.,Effect of TiB2 and ZrB2 additions on structure and properties of Fe-7Al based light weight steel,Materials Science and Engineering A,697,,2017,167.

Knapp G.L., Mukherjee T., Zuback J.S., Wei H.L., Palmer T.A., De A., DebRoy T.,Building blocks for a digital twin of additive manufacturing,Acta Materialia,135,,2017,390.

Kore A.S., Nayak K.C., Date P.P.,Formability of aluminium sheets manufactured by solid state recycling,Journal of Physics: Conference Series,896,1,2017,12007.

Krishnan A.A., Ghyar R., Ravi B.,Comparison of four modular TKA prosthesis designs using static finite element analysis,Journal of Computational Methods in Sciences and Engineering,17,2,2017,315.

Kulkarni S.S.,Numerical methods and computational tools: Finite element method,CRC Handbook of Thermal Engineering, Second Edition,,,2017,1468.

Kumar A., Chaturvedi D., Chowdhury A.,Design and experimental characterization of a hydrogen peroxide-ethanol based combustor for space propulsion,Proceedings of the International Astronautical Congress, IAC,2,,2017,1277.

Kumar N., Puranik B.P.,Numerical study of convective heat transfer with nanofluids in turbulent flow using a Lagrangian-Eulerian approach,Applied Thermal Engineering,111,,2017,1674.

Kumar P., Bajpai V., Singh R.,Burr height prediction of Ti6Al4V in high speed micro-milling by mathematical modeling,Manufacturing Letters,11,,2017,12.

Kumar P., Gandhi P.S., Majumder M.,Interfacing 3D micro/nanochannels with a branch-shaped reservoir enhances fluid and mass transport,Journal of Micromechanics and Microengineering,27,1,2017,15026.

Kumar P., Ul Islam T., Majumder M., Gandhi P.S.,A scalable, lithography-less fabrication process for generating a bioinspired, multi-scale channel network in polymers,Biomedical Physics and Engineering Express,3,4,2017,45007.

Kumar S., Srivastava A.,Finite integral transform-based analytical solutions of dual phase lag bio-heat transfer equation,Applied Mathematical Modelling,52,,2017,378.

Kumar V., Kumawat M., Srivastava A., Karagadde S.,Mechanism of flow reversal during solidification of an anomalous liquid,Physics of Fluids,29,12,2017,123603.

Kumar, Virkeshwar; Kumawat, Mitesh; Srivastava, Atul; Karagadde, Shyamprasad;,Mechanism of flow reversal during solidification of an anomalous liquid,Physics of Fluids,29,12,2017,123603.

Kundalkar D., Singh R., Tewari A.,Effect of Friction Models and Parameters on the Lagrangian Flow Fields in High-Temperature Compression Testing,Journal of Materials Engineering and Performance,26,10,2017,4867.

Kundu, Anup; Soti, Atul K; Bhardwaj, Rajneesh; Thompson, Mark C;,The response of an elastic splitter plate attached to a cylinder to laminar pulsatile flow,Journal of Fluids and Structures,68,,2017,423-443.

L. N. Quan, R. Q. Bermuez, O. Voznyy, G. Walters, A. Jain, et. al, “Highly Emissive Green Perovskite Nanocrys- tals in a Solid State Crystalline Matrix” Advanced Materials 29, 1605945 (2017).

Lakhani S., Raul A., Saha S.K.,Dynamic modelling of ORC-based solar thermal power plant integrated with multitube shell and tube latent heat thermal storage system,Applied Thermal Engineering,123,,2017,458.

Lal S., Chowdhury A., Namboothiri I.N.N.,Synthesis of annulated oxa-triquinanes and oxa-diquinanes via cascade Michael addition-intramolecular alkylation involving α-halodicyclopentadienones,Tetrahedron,73,10,2017,1297.

Lalwani A., Awate S., Chowdhury A., Sreedhara S.,A practical gasoline Homogeneous Charge Compression Ignition (HCCI) engine,11th Asia-Pacific Conference on Combustion, ASPACC 2017,2017-December,,2017,.

Lomate D., Tewari A., Date P., Ukhande M.R., Shegavi G.M., Singh R.K.P.,Fatigue Life Prediction of Induction Hardened Case Depth Specimens Made from 38MnVS6 Micro Alloyed Steel,SAE Technical Papers,2017-March,March,2017,.

Makwana P., Shome M., Goecke S.-F., De A.,Wetting length in gas metal arc brazing of galvanised steel,Science and Technology of Welding and Joining,22,2,2017,166.

Malla, Laxman K; Patil, Nagesh D; Bhardwaj, Rajneesh; Neild, Adrian;,Droplet Bouncing and Breakup during Impact on a Microgrooved Surface,Langmuir,33,38,2017,9620-9631.

Mallick L., Kumar S., Chowdhury A.,Thermal decomposition of ammonium perchlorate—A TGA-FTIR-MS study: Part II,Thermochimica Acta,653,,2017,83.

Mallick L., Lal S., Reshmi S., Namboothiri I.N.N., Chowdhury A., Kumbhakarna N.,Theoretical studies on the propulsive and explosive performance of strained polycyclic cage compounds,New Journal of Chemistry,41,3,2017,920.

Mallick L., Thakker H.K., Lal S., Kumar S., Namboothiri I.N.N., Chowdhury A., Kumbhakarna N.,Bishomocubanes as possible binders in composite solid propellants,11th Asia-Pacific Conference on Combustion, ASPACC 2017,2017-December,,2017,.

Malushte M.D., Sharma A.,CFD study on flow across a stationary cylinder in between two counter-rotating control cylinders,Lecture Notes in Mechanical Engineering,,,2017,1263.

Manik D.N.,Vibro-acoustics: Fundamentals and applications,Vibro-Acoustics: Fundamentals and Applications,,,2017,1.

Manik, D.N.,Vibro-acoustics: Fundamentals and applications,Vibro-Acoustics: Fundamentals and Applications,,,2017,1.

Mankodi T.K., Bhandarkar U.V., Puranik B.P.,An ab initio chemical reaction model for the direct simulation Monte Carlo study of non-equilibrium nitrogen flows,Journal of Chemical Physics,147,8,2017,.

Mankodi T.K., Bhandarkar U.V., Puranik B.P.,Dissociation cross sections for N2 + N → 3N and O2 + O → 3O using the QCT method,Journal of Chemical Physics,146,20,2017,.

Mankodi, T.K., Bhandarkar, U.V., Puranik, B.P.,An ab initio chemical reaction model for the direct simulation Monte Carlo study of non-equilibrium nitrogen flows,Journal of Chemical Physics,147,8,2017,.

Mankodi, T.K., Bhandarkar, U.V., Puranik, B.P.,Dissociation cross sections for N<inf>2</inf>+ N → 3N and O<inf>2</inf>+ O → 3O using the QCT method,Journal of Chemical Physics,146,20,2017,.

Mirajkar H.N., Balasubramanian S.,Effects of varying ambient stratification strengths on the dynamics of a turbulent buoyant plume,Journal of Hydraulic Engineering,143,7,2017,4017013.

Mishra B., Vijay Kumar D., Pakhare C., Jonnalagadda K.N., Prasad M.J.N.V.,Effect of thermomechanical processing on microstructural evolution and deformation behaviour of polycrystalline magnesium under quasi-static and high strain rate conditions,Philosophical Magazine,97,14,2017,1071.

Mittal R.K., Kulkarni S.S., Singh R.K.,Effect of lubrication on machining response and dynamic instability in high-speed micromilling of Ti-6Al-4V,Journal of Manufacturing Processes,28,,2017,413.

Mittal R.K., Yadav S., Singh R.K.,Mechanistic Force and Burr Modeling in High-speed Microdrilling of Ti6Al4V,Procedia CIRP,58,,2017,329.

Mohadikar K., Venugopal A., Agrawal A., Prabhu S.V.,Improvement in the performance of the vortex flowmeter using contraction cone,Measurement: Journal of the International Measurement Confederation,111,,2017,316.

Mohite N., Biradar S., Jha J.S., Mishra S., Tewari A.,Development and removal of alpha-case layer from heat treated Titanium alloys,ASME 2017 Gas Turbine India Conference, GTINDIA 2017,2,,2017,.

Montgomery R., Tomé C., Liu W., Alankar A., Subramanian G., Stanek C.,Use of multiscale zirconium alloy deformation models in nuclear fuel behavior analysis,Journal of Computational Physics,328,,2017,278.

More M.V., Saha S.K., Marje V., Balachandran G.,Numerical model of liquid metal flow in steel making tundish with flow modifiers,IOP Conference Series: Materials Science and Engineering,191,1,2017,12021.

Mote, R.G., Minin, O.V., Minin, I.V.,Focusing behavior of 2-dimensional plasmonic conical zone plate,Optical and Quantum Electronics,49,8,2017,.

Mukherjee T., Manvatkar V., De A., DebRoy T.,Dimensionless numbers in additive manufacturing,Journal of Applied Physics,121,6,2017,.

Mukherjee T., Manvatkar V., De A., DebRoy T.,Mitigation of thermal distortion during additive manufacturing,Scripta Materialia,127,,2017,79.

Muley P.K., Bapat S.L., Atrey M.D.,Design analysis of a Helium re-condenser,IOP Conference Series: Materials Science and Engineering,171,1,2017,12067.

Muthu, N., Maiti, S.K., Yan, W., Falzon, B.G.,Modelling interacting cracks through a level set using the element-free Galerkin method,International Journal of Mechanical Sciences,134,,2017,203.

Namshad T., Shrivastava M., Agrawal A., Sharma A.,Effect of wavelength of fish-like undulation of a hydrofoil in a free-stream flow,Sadhana - Academy Proceedings in Engineering Sciences,42,4,2017,585.

Narayan S., Singh A.K., Srivastava A.,Interferometric study of natural convection heat transfer phenomena around array of heated cylinders,International Journal of Heat and Mass Transfer,109,,2017,278.

Nirgudkar H., Kumar S., Srivastava A.,Thermal analysis of laser-irradiated tissue phantoms using a novel separation of the variables-based discrete transfer method,Numerical Heat Transfer; Part A: Applications,71,5,2017,575.

Nitesh P. Yelve, Mira Mitra, and P.M. Mujumdar, Detection of delamination in composite laminates using Lamb wave-based nonlinear method, Composite Structures, 159, , 2017, DOI:10.1016/j.compstruct.2016.09.073, 257–266

Notghi, Bahram; Bhardwaj, Rajneesh; Bailoor, Shantanu; Thompson, Kimberly A; Weaver, Ashley A; Stitzel, Joel D; Nguyen, Thao D;,Biomechanical Evaluations of Ocular Injury Risk for Blast Loading,Journal of biomechanical engineering,139,8,2017,81010.

Ordia L., Venugopal A., Agrawal A., Prabhu S.V.,Vortex shedding characteristics of a cylinder with a parallel slit placed in a circular pipe,Journal of Visualization,20,2,2017,263.

Panchal H., Kumbhakarna N.,Numerical validation of the liquid-phase decomposition mechanism of guanidinium azotetrazolate,Thermochimica Acta,657,,2017,209.

Pant C.S., Bhattacharya A.,Application of sponge boundary conditions to large-eddy simulation of multiple thermal plumes,Springer Proceedings in Physics,196,,2017,239.

Pare V., Puthoor P., Jonnalagadda K.N., Murty S.V.S.N.,High Temperature Dynamic Characterization of an Aluminum Alloy with Modified Kolsky Bar,Procedia Engineering,173,,2017,844.

Patankar A.S., Atrey M.D.,Construction of Joule Thomson inversion curves for mixtures using equation of state,IOP Conference Series: Materials Science and Engineering,171,1,2017,12086.

Patidar S., Kumar S., Srivastava A., Singh S.,Lattice Boltzmann method-based solution of radiative transfer equation for investigating light propagation through laser-irradiated tissue phantoms,International Communications in Heat and Mass Transfer,84,,2017,144.

Patil N.D., Sharma A., Bhardwaj R.,Level set method based simulations on impact-dynamics of bouncing and non-bouncing droplet on super-hydrophobic substrates,Lecture Notes in Mechanical Engineering,,,2017,1141.

Patil, Nagesh D; Sharma, Atul; Bhardwaj, Rajneesh;,Level Set Method Based Simulations on Impact-Dynamics of Bouncing and Non-bouncing Droplet on Super-Hydrophobic Substrates,Fluid Mechanics and Fluid Power–Contemporary Research,,,2017,1141-1149.

Patne H.S., Kumar A., Karagadde S., Joshi S.S.,Modeling of temperature distribution in drilling of titanium,International Journal of Mechanical Sciences,133,,2017,598.

Patne, Hemant S; Kumar, Ankit; Karagadde, Shyamprasad; Joshi, Suhas S;,Modeling of temperature distribution in drilling of titanium,International Journal of Mechanical Sciences,133,,2017,598-610.

Pattanayak A., Rana G., Duttagupta S.P., Gandhi P.S.,A broadband reflectarray with combination of subwavelength phasing elements,Asia-Pacific Microwave Conference Proceedings, APMC,,,2017,7931462.

Paul S., Vundru C., Singh R., Yan W.,Numerical analysis to determine critical height for multi layered laser cladding for die repair applications,9th Australasian Congress on Applied Mechanics, ACAM 2017,2017-November,,2017,.

Pawar S.P., Sharma A.,Modeling of Magnetohydrodynamics in Nozzle Arc: A Mathematically and Numerically Efficient Approach,IEEE Transactions on Plasma Science,45,11,2017,3019.

Ramalingam R., Atrey M.D.,Theoretical analysis and coating thickness determination of a dual layer metal coated FBG sensor for sensitivity enhancement at cryogenic temperatures,IOP Conference Series: Materials Science and Engineering,278,1,2017,12075.

Rane M V, Bastakoti N, Mukund V, Vedartham D V, “Integration of Dedicated Outdoor Air Systems - Recommended Options for Various Climatic Conditions of India”Air Conditioning and Refrigeration Journal, 2017, pp 3 - 15.

Rane M V, Uphade D B, “Heat Pump for Energy-Efficient Sugarcane Juice Freeze Pre-concentration”. Sugar Tech (2017) https://doi.org/10.1007/s12355-017-0580-0

Rane M V, Uphade D B, “Novel Long Stroke Reciprocating Compressor for Energy Efficient Jaggery Making”, 10th International Conference on Compressors and their Systems, 2017, 11 to 13 Sep 2017, London, UK

Rane, M.V., Uphade, D.B.,Novel Long Stroke Reciprocating Compressor for Energy Efficient Jaggery Making,IOP Conference Series: Materials Science and Engineering,232,1,2017,.

Ravva S.R., Iyer K.N., Gupta A., Kumar G., Gaikwad A.J., Gupta S.K.,Comparison of lumped parameter and CFD code predictions: Sump evaporation phenomena,Lecture Notes in Mechanical Engineering,,,2017,1685.

S. Gouripriya and Parag Tandaiya,Mechanisms of compressive deformation and failure of porous bulk metallic glasses,Mechanisms of compressive deformation and failure of porous bulk metallic glasses,25,,2017,10.1088/1361-651X/aa67b0,45006

S. Mukhopadhyay, D. Bansal, O. Delaire, D. Perrodin, E. Bourret-Courchesne, D.J. Singh, and L. Lindsay,Curious case of cuprous chloride: Giant thermal resistance and anharmonic quasiparticle spectra driven by dispersion nesting,Physical Review B,96,,2017,100301(R).

Saha S.K., Agrawal A., Soni Y.,Heat transfer characterization of rhombic microchannel for H1 and H2 boundary conditions,International Journal of Thermal Sciences,111,,2017,223.

Sahoo D.K., Dewan P., Srivastava P., Kohli A.K., Sandhu I.P.S., Kumari R., Saroha D.R., Guha A., Tewari A., Singh R.K.,Performance of Gamma Chamber under blast loading,Annals of Nuclear Energy,105,,2017,240.

Sahoo D.K., Guha A., Tewari A., Singh R.K.,Performance of Monolithic Plate and Layered Plates under Blast Load,Procedia Engineering,173,,2017,1909.

Sahu S.N., Gokhale A.A., Mehra A.,Bubble Size Distribution in Foaming of Liquid Aluminum and the Role of Coarsening and Coalescence,Advanced Engineering Materials,19,11,2017,1600745.

Sahu S.N., Gokhale A.A., Mehra A.,Prediction of Bubble Size Distribution in Aluminium Foam as a Function of %Titanium Hydride Addition,Transactions of the Indian Institute of Metals,70,8,2017,1981.

Samanta A., Teli M., Singh R.,Experimental characterization and finite element modeling of the residual stresses in laser-assisted mechanical micromachining of Inconel 625,Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture,231,10,2017,1735.

Sankar M., Satya Prasad V.V., Baligidad R.G., Gokhale A.A.,Melting, Processing and Characterization of Nb-10W-2.5Zr (Cb-752) Alloy,Transactions of the Indian Institute of Metals,70,4,2017,1055.

Sankaranarayanan A., Chowdhury A., Kumbhakarna N.,Droplet combustion studies on an RP-1 surrogate and its constituent fuels,11th Asia-Pacific Conference on Combustion, ASPACC 2017,2017-December,,2017,.

Sankaranarayanan A., Lal S., Namboothiri I.N.N., Reshmi S., Chowdhury A., Kumbhakarna N.,Droplet combustion studies of bis(nitratomethyl)-1-3-bishomocubane and its mixture with an RP-1 surrogate fuel,11th Asia-Pacific Conference on Combustion, ASPACC 2017,2017-December,,2017,.

Sankaranarayanan A., Swami U., Chowdhury A., Kumbhakarna N.,Flame temperature measurement using color-ratio pyrometry with a consumer grade DSLR camera,11th Asia-Pacific Conference on Combustion, ASPACC 2017,2017-December,,2017,.

Sarkar M., Paramane S.B., Sharma A.,Periodically Fully Developed Heat and Fluid Flow Characteristics in a Furrowed Wavy Channel,Heat Transfer Engineering,38,2,2017,278.

Sata A., Ravi B.,Bayesian inference-based investment-casting defect analysis system for industrial application,International Journal of Advanced Manufacturing Technology,90,43443,2017,3301.

Sata A., Ravi B.,Foundry data analytics to identify critical parameters affecting mechanical properties of investment castings,ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE),14,,2017,.

Senthilnathan K., Hiremath C.P., Naik N.K., Guha A., Tewari A.,Microstructural damage dependent stiffness prediction of unidirectional CFRP composite under cyclic loading,Composites Part A: Applied Science and Manufacturing,100,,2017,118.

Shah B., Bhagwat A., Sridharan A.,Numerical investigation on orthogonal impingement of circular air jet on a heated flat plate at low jet plate spacing,Lecture Notes in Mechanical Engineering,,,2017,1673.

Shah DS, Middleton C, Gurdezi S, Horwitz M, Kedgley AE, The effects of wrist motion and hand orientation on muscle forces: a physiologic wrist simulator study, Journal of Biomechanics, 60, 1, 2017, 10.1016/j.jbiomech.2017.06.017, 232-237

Shaikh T., Patidar L., Chowdhury A.,Experimental and numerical investigation of combustion in a hydrocarbon and gaseous oxygen fuelled rocket,Applied Thermal Engineering,110,,2017,1554.

Shaikh T., Sawanni R., Chowdhury A., Umakant S.,A comparison of the performance of uni-element injectors for laboratory scale gas-liquid rocket engines,11th Asia-Pacific Conference on Combustion, ASPACC 2017,2017-December,,2017,.

Shakya P., Darpe A.K., Kulkarni M.S.,Bearing damage classification using instantaneous energy density,JVC/Journal of Vibration and Control,23,16,2017,2578.

Shaligram A., Saha S.K.,Application of dynamic bubble departure model for new, low-gwp refrigerants on enhanced, structured surfaces,ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE),8,,2017,.

Sharma A.,Numerical methods and computational tools: Computer aided engineering,CRC Handbook of Thermal Engineering, Second Edition,,,2017,1442.

Sharma A.,Numerical methods and computational tools: Finite difference methods,CRC Handbook of Thermal Engineering, Second Edition,,,2017,1445.

Sharma A.,Numerical methods and computational tools: Finite volume method,CRC Handbook of Thermal Engineering, Second Edition,,,2017,1454.

Sharma A.,Numerical methods and computational tools: Software and computer codes,CRC Handbook of Thermal Engineering, Second Edition,,,2017,1558.

Sharma P., Kulkarni M.S., Parlikad A.,Capability assessment of Army spare parts replenishment system: Suitability for a dynamic time separated lean-agile supply,Benchmarking,24,5,2017,1166.

Sharma P., Kulkarni M.S., Yadav V.,A simulation based optimization approach for spare parts forecasting and selective maintenance,Reliability Engineering and System Safety,168,,2017,274.

Sharma R.K., Sunil S., Kumawat B.K., Singh R.N., Tewari A., Kashyap B.P.,Influence of hydride orientation on fracture toughness of CWSR Zr-2.5%Nb pressure tube material between RT and 300 °C,Journal of Nuclear Materials,488,,2017,231.

Sharma S., Kumar R., Chowdhury A., Yoon Y., Kumar S.,On the effect of spray parameters on CO and NOx emissions in a liquid fuel fired flameless combustor,Fuel,199,,2017,229.

Sharma S., Saha S.K.,Comparative Study of Thermal Performance of Parallel Plate and Rectangular Microchannel Counter Flow Heat Exchangers,Heat Transfer Engineering,38,16,2017,1404.

Shendage D.J., Kedare S.B., Bapat S.L.,Cyclic analysis and optimization of design parameters for Beta-configuration Stirling engine using rhombic drive,Applied Thermal Engineering,124,,2017,595.

Shendage D.J., Kedare S.B., Bapat S.L.,Dynamic balancing and experience during the development of a single cylinder Beta-configuration Stirling engine using rhombic drive,Energy,140,,2017,224.

Shendage D.J., Kedare S.B., Bapat S.L.,Numerical investigations on the Dish–Stirling engine system,International Journal of Ambient Energy,,,2017,1.

Shenoy R., Gandhi P.,Nested Saturation Based Control of Ultra-Compliant Cantilever with Tip Mass mounted on a Cart,IFAC-PapersOnLine,50,1,2017,8465.

Shimpi R.P., Shetty R.A., Guha A.,A simple single variable shear deformation theory for a rectangular beam,Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science,231,24,2017,4576.

Shimpi R.P., Shetty R.A., Guha A.,A single variable refined theory for free vibrations of a plate using inertia related terms in displacements,European Journal of Mechanics, A/Solids,65,,2017,136.

Shinde A., Arpit S., Km P., Rao P.V.C., Saha S.K.,Heat Transfer Characterization and Optimization of Latent Heat Thermal Storage System Using Fins for Medium Temperature Solar Applications,Journal of Solar Energy Engineering, Transactions of the ASME,139,3,2017,31003.

Shrivastava A, Zinn M, Duffie NA, Ferrier NJ, Smith CB, Pfefferkorn FE., Force measurement-based discontinuity detection during friction stir welding., Journal of Manufacturing Processes, 26, , 2017, , 113-121

Shrivastava M., Malushte M., Agrawal A., Sharma A.,CFD study on hydrodynamics of three fish-like undulating hydrofoils in side-by-side arrangement,Lecture Notes in Mechanical Engineering,,,2017,1443.

Shukla A.K., Sridharan A., Atrey M.D.,Investigation of transient chill down phenomena in tubes using liquid nitrogen,IOP Conference Series: Materials Science and Engineering,278,1,2017,12035.

Siddique A., Medhi B.J., Agrawal A., Singh A., Saha S.K.,Design of a collector shape for uniform flow distribution in microchannels,Journal of Micromechanics and Microengineering,27,7,2017,.

Siddique A., Medhi B.J., Agrawal A., Singh A., Saha S.K.,Design of a collector shape for uniform flow distribution in microchannels,Journal of Micromechanics and Microengineering,27,7,2017,75026.

Singh D.K., Maiti S.K., Bhandakkar T.K., Raman R.K.S.,Efficient approach for cohesive zone based three-dimensional analysis of hydrogen-assisted cracking of a circumferentially notched round tensile specimen,International Journal of Hydrogen Energy,42,24,2017,15943.

Singh D.K., Singh Raman R.K., Maiti S.K., Bhandakkar T.K., Pal S.,Investigation of role of alloy microstructure in hydrogen-assisted fracture of AISI 4340 steel using circumferentially notched cylindrical specimens,Materials Science and Engineering A,698,,2017,191.

Singh G., Bhandakkar T.K.,Analytical investigation of binder's role on the diffusion induced stresses in Lithium ion battery through a representative system of spherical isolated electrode particle enclosed by binder,Journal of the Electrochemical Society,164,4,2017,A608.

Singh K.K., Kartik V., Singh R.,Component Mode Synthesis Approach for Micro End Mill Dynamics Considering Machine Tool Compliance,Procedia CIRP,58,,2017,469.

Singh K.K., Kartik V., Singh R.,Modeling of Dynamic Instability Via Segmented Cutting Coefficients and Chatter Onset Detection in High-Speed Micromilling of Ti6Al4V,Journal of Manufacturing Science and Engineering, Transactions of the ASME,139,5,2017,.

Singh K.K., Kartik V., Singh R.,Modeling of Dynamic Instability Via Segmented Cutting Coefficients and Chatter Onset Detection in High-Speed Micromilling of Ti6Al4V,Journal of Manufacturing Science and Engineering, Transactions of the ASME,139,5,2017,51005.

Singh N., Agrawal A.,Onsager’s principle consistent 13 moments transport equations,Lecture Notes in Mechanical Engineering,,,2017,145.

Singh N., Jadhav R.S., Agrawal A.,Derivation of stable Burnett equations for rarefied gas flows,Physical Review E,96,1,2017,.

Singh, D.K., Maiti, S.K., Bhandakkar, T.K., Raman, R.K.S.,Efficient approach for cohesive zone based three-dimensional analysis of hydrogen-assisted cracking of a circumferentially notched round tensile specimen,International Journal of Hydrogen Energy,42,24,2017,15943.

Singh, D.K., Singh Raman, R.K., Maiti, S.K., Bhandakkar, T.K., Pal, S.,Investigation of role of alloy microstructure in hydrogen-assisted fracture of AISI 4340 steel using circumferentially notched cylindrical specimens,Materials Science and Engineering A,698,,2017,191.

Sinha G.K., Dharmaraj R.H., Haridas D., Srivastava A.,Performance evaluation of compact channels with surface modifications for heat transfer enhancement: An interferometric study in developing flow regime,International Journal of Heat and Fluid Flow,64,,2017,55.

Sinha G.K., Srivastava A.,Exploring the potential of nanofluids for heat transfer augmentation in dimpled compact channels: Non-intrusive measurements,International Journal of Heat and Mass Transfer,108,,2017,1140.

Sisodia S.S., Sarkar S., Saha S.K.,Fluid flow and mixed convective heat transfer around a semi-circular cylinder at incidence with a tandem downstream square cylinder in cross flow,International Journal of Thermal Sciences,121,,2017,13.

Soni G., Singh R., Yan W.,Modeling multiple damage mechanisms via a multi-fiber multi-layer representative volume element (M2RVE),9th Australasian Congress on Applied Mechanics, ACAM 2017,2017-November,,2017,.

Soti, Atul Kumar; Thompson, Mark C; Sheridan, John; Bhardwaj, Rajneesh;,Harnessing electrical power from vortex-induced vibration of a circular cylinder,Journal of Fluids and Structures,70,,2017,360-373.

Srinivasan S., Diallo M.S., Saha S.K., Abass O.A., Sharma A., Balasubramanian G.,Effect of temperature and graphite particle fillers on thermal conductivity and viscosity of phase change material n-eicosane,International Journal of Heat and Mass Transfer,114,,2017,318.

Suraj Nair, Viraj Karnik, Saurabh Kolte, Joel George, Nitesh P. Yelve, Khsirsagar Nanaji, Experimental investigation of vibration characteristics of Magneto-rheological fluid with single rotor system, International Journal of Mechanical and Production Engineering, 5, 7, 2017, DOI:IJMPE-IRAJ-DOIONLINE-8687, 50–55

Swami U., Dalwani M., Mohan K., Chowdhury A.,Ignition delays of blended unsymmetrical dimethyl hydrazine with an energetic ionic liquid,11th Asia-Pacific Conference on Combustion, ASPACC 2017,2017-December,,2017,.

Swami U., Jayaraman K., Chowdhury A.,Burn rate characterization of an alternative monopropellant–hydroxyl ethyl hydrazinium nitrate,11th Asia-Pacific Conference on Combustion, ASPACC 2017,2017-December,,2017,.

Takshak, A., Roy, T., Tandaiya, P., Kunwar, A.,Effect of fuel concentration and force on collective transport by a team of dynein motors,Protein Science,26,2,2017,186.

Telrandhe S.V., Saxena A.K., Mishra S.,Effect of microstructure and cutting speed on machining behavior of Ti6Al4V alloy,Journal of Mechanical Science and Technology,31,5,2017,2177.

Thakar P.S., Bandyopadhyay B., Gandhi P.,Improved output-feedback second order sliding mode control design with implementation for underactuated slosh-container system having confined track length,IET Control Theory and Applications,11,8,2017,1316.

Thakar P.S., Trivedi P.K., Bandyopadhyay B., Gandhi P.S.,A New Nonlinear Control for Asymptotic Stabilization of a Class of Underactuated Systems: An Implementation to Slosh-Container Problem,IEEE/ASME Transactions on Mechatronics,22,2,2017,1082.

Thanedar A., Dongre G.G., Singh R., Joshi S.S.,Surface integrity investigation including grinding burns using barkhausen noise (BNA),Journal of Manufacturing Processes,30,,2017,226.

Tripathi D.K., Garg G., Agrawal U., Menezes V., Bhandarkar U.V., Puranik B.P.,Ignition delay study of aluminium oxide liquid nano-fuel in a shock tube,Current Science,112,7,2017,1561.

Tripathi S., Bhattacharya A., Singh R., Tabor R.F.,Rheological behavior of high internal phase water-in-oil emulsions: Effects of droplet size, phase mass fractions, salt concentration and aging,Chemical Engineering Science,174,,2017,290.

Tripathi S., Tabor R.F., Singh R., Bhattacharya A.,Characterization of interfacial waves and pressure drop in horizontal oil-water core-annular flows,Physics of Fluids,29,8,2017,82109.

Tripathi, D.K., Garg, G., Agrawal, U., Menezes, V., Bhandarkar, U.V., Puranik, B.P.,Ignition delay study of aluminium oxide liquid nano-fuel in a shock tube,Current Science,112,7,2017,1561.

Trushnikov D.N., Salomatova E.S., Bezukladnikov I.I., Sinani I.L., Karunakaran K.P.,Modeling the Influence of the Penetration Channel's Shape on Plasma Parameters When Handling Highly Concentrated Energy Sources,Advances in Materials Science and Engineering,2017,,2017,.

Ul Islam T., Gandhi P.S.,Spontaneous fabrication of three-dimensional multiscale fractal structures using hele-shaw cell,Journal of Manufacturing Science and Engineering, Transactions of the ASME,139,3,2017,3100.

V. Sangwan and S.K. Agrawal, “Robustness of a flatness based controller against parametric uncertainties for a class of under-actuated planar manipulators,” Proceedings of American Control Conference, Seattle-USA, pp. 3735-3740, 2017.

Varma S.S., Rao S.S., Srivastava A.,Simultaneous measurement of thermal and solutal diffusivities of salt-water solutions from a single-shot dual wavelength interferometric image,Experimental Thermal and Fluid Science,81,,2017,123.

Varote N., Joshi S.S.,Microstructural Analysis of Machined Surface Integrity in Drilling a Titanium Alloy,Journal of Materials Engineering and Performance,26,9,2017,4391.

Venkatesan U.S., Pande S.S.,Efficient process planning strategies for additive manufacturing,ASME 2017 12th International Manufacturing Science and Engineering Conference, MSEC 2017 collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing,2,,2017,.

Venugopal A., Agrawal A., Prabhu S.V.,Investigations on Bluff Bodies as Improved Vortex Shedders Placed Inside a Circular Pipe,Journal of Fluids Engineering, Transactions of the ASME,139,4,2017,.

Vicharapu B., Kanan L.F., Clarke T., De A.,An investigation on friction hydro-pillar processing,Science and Technology of Welding and Joining,22,7,2017,555.

Vivek Garg, Deepak Marla, and Suhas S. Joshi,A study on curved surface laser ablation using beam profile approach,International Journal of Additive and Subtractive Materials Manufacturing,1,1,2017,42-56.

Yadav A.K., Chowdhury A., Srivastava A.,Interferometric investigation of methanol droplet combustion in varying oxygen environments under normal gravity,International Journal of Heat and Mass Transfer,111,,2017,871.

Yadav A.K., kumar M., Bajpai V., Singh N.K., Singh R.K.,FE modeling of burr size in high- speed micro-milling of Ti6Al4V,Precision Engineering,49,,2017,287.

Zhang Y., Bernard A., Harik R., Karunakaran K.P.,Build orientation optimization for multi-part production in additive manufacturing,Journal of Intelligent Manufacturing,28,6,2017,1393.

A. Jain and A. J. H. McGaughey, “Thermal transport by phonons and electrons in aluminum, silver, and gold from first principles.” Physical Review B 93, 081206 (2016).

A. Jain†, O. Voznyy†, S. Hoogland, M. Korkusinski, P. Hawrylak, and E. H. Sargent, “Atomistic design of CdSe/CdS core-shell quantum dots with suppressed Auger recombination.” Nano Letters 16, 6491 (2016).

Abraham, S., Vedula, R.P.,Effectiveness and heat transfer characteristics for a single heated rectangular jet with different aspect ratios impinging perpendicularly on a flat surface,International Journal of Heat and Mass Transfer,102,,2016,1012.

Abraham, S., Vedula, R.P.,Heat transfer and pressure drop measurements in a square cross-section converging channel with V and W rib turbulators,Experimental Thermal and Fluid Science,70,,2016,208.

Adhikari S., Sayre A., Chandy A.J.,A Hybrid Newton/Time Integration Approach Coupled to Soot Moment Methods for Modeling Soot Formation and Growth in Perfectly-Stirred Reactors,Combustion Science and Technology,188,8,2016,1262.

Agrawal P., Gandhi P.S., Neild A.,Particle manipulation affected by streaming flows in vertically actuated open rectangular chambers,Physics of Fluids,28,3,2016,32001.

Aneesh A.M., Sharma A., Srivastava A., Vyas K.N., Chaudhuri P.,Thermal-hydraulic characteristics and performance of 3D straight channel based printed circuit heat exchanger,Applied Thermal Engineering,98,,2016,474.

Arivazhagan G.B., Bhattacharya A., Sharma A.,Parallel performance study for simulation of multi-phase flows with phase change development, parallelization and analysis of in-house CFD codes,2016 4th International Conference on Parallel, Distributed and Grid Computing, PDGC 2016,,,2016,605.

Arvind Pattabhiraman, Deepak Marla, and Shiv G. Kapoor,A Computational Model to Study Film Formation and Debris Flushing Phenomena in Spray-Electric Discharge Machining,Journal of Micro and Nano-Manufacturing,4,3,2016,31002.

Asjad M., Kulkarni M.S., Gandhi O.P.,Supportability issues of mechanical systems for their useful life,Journal of Engineering, Design and Technology,14,1,2016,33.

Badgujar A.D., Atrey M.D.,Theoretical and experimental investigation of pressure drop and refrigeration effect in pulse tube cryocooler,Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science,230,11,2016,1910.

Bajpai V., Mahambare P., Singh R.K.,Effect of Thermal and Material Anisotropy of Pyrolytic Carbon in Vibration-Assisted Micro-EDM Process,Materials and Manufacturing Processes,31,14,2016,1879.

Bajpai V., Prasad B., Singh R.,Fabrication and functional characterization of engineered features on pyrolytic carbon,Advances in Manufacturing,4,2,2016,134.

Bange, Prathamesh G; Bhardwaj, Rajneesh;,Computational study of bouncing and non-bouncing droplets impacting on superhydrophobic surfaces,Theoretical and Computational Fluid Dynamics,30,3,2016,211-235.

Barnwal V.K., Tewari A., Narasimhan K., Mishra S.K.,Effect of plastic anisotropy on forming behavior of AA-6061 aluminum alloy sheet,Journal of Strain Analysis for Engineering Design,51,7,2016,507.

Bhagat K., Saha S.K.,Numerical analysis of latent heat thermal energy storage using encapsulated phase change material for solar thermal power plant,Renewable Energy,95,,2016,323.

Bhagwat A.B., Sridharan A.,Convective heat transfer from a heated plate to the orthogonally impinging air jet,Journal of Thermal Science and Engineering Applications,8,4,2016,41009.

Bhattacharya A., Kesarkar T.,Numerical simulation of particulate flows using a hybrid of finite difference and boundary integral methods,Physical Review E,94,4,2016,43309.

Bhattacharya A., Shahajhan S.S.S.,Power extraction from vortex-induced angular oscillations of elliptical cylinder,Journal of Fluids and Structures,63,,2016,140.

Brijesh, P; Sreedhara, S;,Experimental and numerical investigations of effect of split injection strategies and dwell between injections on combustion and emissions characteristics of a diesel engine,Clean Technologies and Environmental Policy,18,7,2016,2325-2334.

Buchibabu V., Reddy G.M., Kulkarni D., De A.,Friction Stir Welding of a Thick Al-Zn-Mg Alloy Plate,Journal of Materials Engineering and Performance,25,3,2016,1163.

Cai, B; Lee, PD; Karagadde, S; Marrow, TJ; Connolley, T;,Time-resolved synchrotron tomographic quantification of deformation during indentation of an equiaxed semi-solid granular alloy,Acta Materialia,105,,2016,338-346.

Chachada M., Vachhani L., Kartik V.,Empirical waypoint navigator for overactuated autonomous underwater vehicle using novel kinematic-dynamic controller pair and control allocation techniques,2016 Indian Control Conference, ICC 2016 - Proceedings,,,2016,354.

Chattaraj S., Pant P., Pawaskar D.N., Nanavati H.,How many network chains of a densely crosslinked glassy thermoset deform cooperatively at yield?,Polymer,82,,2016,305.

Chihobo C.H., Chowdhury A., Kuipa P.K., Simbi D.J.,Pyrolysis characteristics and kinetics of acid tar waste from crude benzol refining: A thermogravimetry-mass spectrometry analysis,Waste Management and Research,34,12,2016,1258.

Choudhury K., Singh R.K., Narayan S., Srivastava A., Kumar A.,Time resolved interferometric study of the plasma plume induced shock wave in confined geometry: Two-dimensional mapping of the ambient and plasma density,Physics of Plasmas,23,4,2016,42108.

D. Bansal, A. Aref, G. Dargush, and O. Delaire,Modeling non-harmonic behavior of materials from experimental inelastic neutron scattering and thermal expansion measurements,Journal of Physics: Condensed Matter,28,,2016,385201.

D. Bansal, J. Hong, C.W. Li, A.F. May, W. Porter, M.Y. Hu, D.L. Abernathy, and O. Delaire,Phonon anharmonicity and negative thermal expansion in SnSe,Physical Review B,94,,2016,54307.

Damle R.M., Ardhapurkar P.M., Atrey M.D.,Numerical investigation of transient behaviour of the recuperative heat exchanger in a MR J–T cryocooler using different heat transfer correlations,Cryogenics,80,,2016,52.

Das A., Shome M., Goecke S.-F., De A.,Numerical modelling of gas metal arc joining of aluminium alloy and galvanised steels in lap joint configuration,Science and Technology of Welding and Joining,21,4,2016,303.

Das R., Joshi S.S., Barshilia H.C.,Analytical model of progression of flank wear land width in drilling,ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE),2,,2016,.

Das R., Nayak N., Barshilia H.C., Joshi S.S.,Wear and progression of life of plasma nitrided four-faceted high-speed steel drills with varying geometries,Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture,230,10,2016,1885.

Das S.R., Dhakal P., Poudyal H., Chandy A.J.,Assessment of the effect of speed ratios in numerical simulations of highly viscous rubber mixing in a partially filled chamber,Rubber Chemistry and Technology,89,3,2016,371.

Date P.P., Jamadar K.D.,Application of Strain Non-uniformity Index (SNI) based approach to predict failure in sheet metal components,Journal of Physics: Conference Series,734,3,2016,32054.

Deepak Marla, Yang Zhang, Masoud Jabbari, Mads R. Sonne, Jon Spangenberg, Jesper H. Hattel,A computational model for heterogeneous heating during pulsed laser irradiation of polymers doped with light-absorbing microparticles,Applied Physics A: Materials Science and Processing,122,12,2016,1042.

Deepak Marla, Yang Zhang, Masoud Jabbari, Mads R. Sonne, Jon Spangenberg, Jesper H. Hattel,Improvement in surface characterisitcs of polymers for subsequent electroless plating using liquid assisted laser processing,Physics Procedia,83,1,2016,211-217.

Desai I., Gupta A., Chakraborty D.,Transparency enhancement of haptic interface using model matching approach,2016 Indian Control Conference, ICC 2016 - Proceedings,,,2016,399.

Deshmukh, P.W., Prabhu, S.V., Vedula, R.P.,Heat transfer enhancement for laminar flow in tubes using curved delta wing vortex generator inserts,Applied Thermal Engineering,106,,2016,1415.

Deshpande A., Puranik B.,Effect of viscosity and wall heat conduction on shock attenuation in narrow channels,Shock Waves,26,4,2016,465.

Dhumal D.A., Kulkarni P., Date P.P., Nandedkar V.M.,Experimental verification of the Strain Non-Uniformity Index (SNI) based failure prediction,Journal of Physics: Conference Series,734,3,2016,32108.

Duryodhan V.S., Singh A., Singh S.G., Agrawal A.,A simple and novel way of maintaining constant wall temperature in microdevices,Scientific Reports,6,,2016,.

Duryodhan V.S., Singh A., Singh S.G., Agrawal A.,Three-dimensional numerical study of conjugate heat transfer in diverging microchannel,Proceedings of the Indian National Science Academy,82,2,2016,321.

Enayati H., Chandy A.J., Braun M.J.,Numerical simulations of transitional and turbulent natural convection in laterally heated cylindrical enclosures for crystal growth,Numerical Heat Transfer; Part A: Applications,70,11,2016,1195.

Enayati H., Chandy A.J., Braun M.J.,Numerical simulations of turbulent natural convection in laterally-heated cylindrical enclosures with baffles for crystal growth,ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE),8,,2016,.

F. Bao, R. Archibald, D. Bansal, and O. Delaire,Hierarchical optimization for neutron scattering problems,Journal of Computational Physics,315,,2016,39-51.

F. Bao, R. Archibald, J. Niedziela, D. Bansal, and O. Delaire,Complex optimization for big computational and experimental neutron datasets,Nanotechnology,27,,2016,484002.

Gandhi P.S., Borja P., Ortega R.,Energy shaping control of an inverted flexible pendulum fixed to a cart,Control Engineering Practice,56,,2016,27.

Ganesh, V; Deshpande, S; Sreedhara, S;,Numerical investigation of late injection strategy to achieve premixed charge compression ignition mode of operation,International Journal of Engine Research,17,4,2016,469-478.

Gautam P., Azizi Y., Chandy A.J.,A parametric study of air-pumping phenomenon in tire grooves using computational fluid dynamics,ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE),13,,2016,.

Gautam P., Chandy A.J.,A computational fluid dynamics model for investigating air-pumping mechanisms in air-borne tire noise,Tire Science and Technology,44,3,2016,191.

Gautam P., Chandy A.J.,A Three-Dimensional Numerical Investigation of Air Pumping Noise Generation in Tires,Journal of Vibration and Acoustics, Transactions of the ASME,138,6,2016,.

Gautam P., Chandy A.J.,Numerical investigation of the air pumping noise generation mechanism in tire grooves,Journal of Vibration and Acoustics, Transactions of the ASME,138,5,2016,51002.

Gudibande N., Iyer K.,Thermal shrinkage-based model for predicting the voids during solidification of lead,Nuclear Technology,196,3,2016,674.

Guha A., Mechoso C.R., Konor C.S., Heikes R.P.,Modeling rossby wave breaking in the southern spring stratosphere,Journal of the Atmospheric Sciences,73,1,2016,393.

Gupta A.K., Kartik V., Ramanarayanan C.P.,Design, development and performance evaluation of a light diesel hybrid electric pickup vehicle using a new parallel hybrid transmission system,2015 IEEE International Transportation Electrification Conference, ITEC-India 2015,,,2016,.

Gupta A.K., Kartik V., Ramanarayanan C.P.,Experimental Study on Performance of a Parallel Diesel Hybrid Vehicle Retrofitted with a Single Planetary Gear Train as an Add-On Transmission,SAE Technical Papers,2016-February,February,2016,.

Gupta S., Satpal S.B., Banerjee S., Guha A.,Vibration based health monitoring of honeycomb core sandwich panels using support vector machine,International Journal on Smart Sensing and Intelligent Systems,9,1,2016,215.

Halkarni S.S., Sridharan A., Prabhu S.V.,Estimation of volumetric heat transfer coefficient in randomly packed beds of uniform sized spheres with water as working medium,International Journal of Thermal Sciences,110,,2016,340.

Halkarni S.S., Sridharan A., Prabhu S.V.,Influence of inserts on the pressure drop distribution in randomly packed beds with uniform sized spheres in the endshield model of AHWR,Experimental Thermal and Fluid Science,74,,2016,181.

Hasan M.N., Vatani M., Chandy A., Choi J.-W.,Experimental and Numerical Analysis of Filament Front Deformation for Direct-Print,Journal of Manufacturing Science and Engineering, Transactions of the ASME,138,1,2016,.

Hemadri V., Varade V.V., Agrawal A., Bhandarkar U.V.,Investigation of rarefied gas flow in microchannels of non-uniform cross section,Physics of Fluids,28,2,2016,.

Hemadri, V., Varade, V.V., Agrawal, A., Bhandarkar, U.V.,Investigation of rarefied gas flow in microchannels of non-uniform cross section,Physics of Fluids,28,2,2016,.

Hindasageri, V., Kuntikana, P., Tajik, A.R., Vedula, R.P., Prabhu, S.V.,Axis switching in impinging premixed methane-air flame jets,Applied Thermal Engineering,107,,2016,144.

Islam T.U., Gandhi P.S.,Fabrication of Multscale Fractal-Like Structures by Controlling Fluid Interface Instability,Scientific Reports,6,,2016,37187.

Islam T.U., Gandhi P.S.,Spontaneous fabrication of three dimensional multi-scale fractal structures using Hele Shaw cell,ASME 2016 11th International Manufacturing Science and Engineering Conference, MSEC 2016,2,,2016,.

Jadhav S., Tekale R., Date P.P.,Analysis of Strain Non-uniformity Index (SNI) for different geometries of drawn sheet metal parts,Journal of Physics: Conference Series,734,3,2016,32098.

Jain D.S., Srinivas Rao S., Srivastava A.,Rainbow schlieren deflectometry technique for nanofluid-based heat transfer measurements under natural convection regime,International Journal of Heat and Mass Transfer,98,,2016,697.

Jayaram K., Joshi S.S.,Design and development of a vision-based micro-assembly system,Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture,230,6,2016,1164.

Joseph T.J., Kartik V.,Nanometer resolution dynamic displacement measurement in industrial/high noise environments,Proceedings of the IEEE International Conference on Industrial Technology,2016-May,,2016,673.

Kapil S., Joshi P., Yagani H.V., Rana D., Kulkarni P.M., Kumar R., Karunakaran K.P.,Optimal space filling for additive manufacturing,Rapid Prototyping Journal,22,4,2016,660.

Karagadde, Shyamprasad; Dutta, Pradip;,A comparison of time-scales governing the interaction and growth of hydrogen bubbles with a solidifying front,International Communications in Heat and Mass Transfer,79,,2016,16-20.

Katiyar G., Karagadde S., Saha S.K., Sharma A.,Numerical modelling of bubble growth in microchannel using Level Set Method,International Journal of Heat and Mass Transfer,101,,2016,719.

Katiyar, Gaurav; Karagadde, Shyamprasad; Saha, Sandip K; Sharma, Atul;,Numerical modelling of bubble growth in microchannel using Level Set Method,International Journal of Heat and Mass Transfer,101,,2016,719-732.

Kc A., Chandy A.J.,Assessment of Five SGS Models for Low-R e m MHD Turbulence,Flow, Turbulence and Combustion,96,3,2016,693.

Kekade S., Patil S., Joshi S., Singh R.,Parametric analysis of cylindrical plunge grinding on micro-alloyed steel using taguchi analysis,Key Engineering Materials,705,,2016,255.

Kenneth C. Mills, Shyamprasad Karagadde, Peter David Lee, Lang Yuan, Fatemeh Shahbazian;,Calculation of Physical Properties for Use in Models of Continuous Casting Process-Part 2: Steels,ISIJ International,56,2,2016,274-281.

Keshav K., Alya S., Singh R.K., Gupta A.,Laser cladding for 3D deposition and Free-form repair,Proceedings of the IEEE International Conference on Industrial Technology,2016-May,,2016,898.

Khandelwal H., Ravi B.,Effect of molding parameters on chemically bonded sand mold properties,Journal of Manufacturing Processes,22,,2016,127.

Khandelwal H., Renukananda K.H., Ravi B.,Multi-spiral flow benchmark for small thin-wall castings supported by computer simulation,72nd World Foundry Congress, WFC 2016,,,2016,337.

Krishnan A.A., Ghyar R., Ravi B.,Effect of modularity on the fatigue performance of tibial tray designs in TKA prostheses,Journal of Long-Term Effects of Medical Implants,26,1,2016,89.

Krishnan H., Agrawal A., Sharma A., Sheridan J.,Near-body vorticity dynamics of a square cylinder subjected to an inline pulsatile free stream flow,Physics of Fluids,28,9,2016,.

Krishnan H., Agrawal A., Sharma A., Sheridan J.,Near-body vorticity dynamics of a square cylinder subjected to an inline pulsatile free stream flow,Physics of Fluids,28,9,2016,93605.

Krishnan S., Kulkarni D.V., De A.,Multipass pulsed current gas metal arc welding of P91 steel,Science and Technology of Welding and Joining,21,3,2016,171.

Krishnan S., Kulkarni D.V., De A.,Pulsed current gas metal arc welding of P91 steels using metal cored wires,Journal of Materials Processing Technology,229,,2016,826.

Kshirsagar A., Guha A.,Design optimization of rocker bogie system and development of look-up table for reconfigurable wheels for a planetary rover,International Journal of Vehicle Structures and Systems,8,2,2016,58.

Kulkarni N.G., Bhandarkar U.V., Puranik B.P., Rao A.B.,Experimental determination of thermal properties of alluvial soil,Heat and Mass Transfer/Waerme- und Stoffuebertragung,,,2016,1.

Kulkarni, N.G., Bhandarkar, U.V., Puranik, B.P., Rao, A.B.,Experimental determination of thermal properties of alluvial soil,Heat and Mass Transfer/Waerme- und Stoffuebertragung,52,12,2016,2661.

Kumar A., Saha S.K.,Energy and exergy analyses of medium temperature latent heat thermal storage with high porosity metal matrix,Applied Thermal Engineering,109,,2016,911.

Kumar P., Gandhi P.S., Majumder M.,Design and fabrication of thin microvascularised polymer matrices inspired from secondary lamellae of fish gills,Proceedings of SPIE - The International Society for Optical Engineering,9797,,2016,979713.

Kumar S., Srivastava A.,Numerical investigation of the influence of pulsatile blood flow on temperature distribution within the body of laser-irradiated biological tissue phantoms,International Journal of Heat and Mass Transfer,95,,2016,662.

Kumari M., Kulkarni M.S.,A Complexity Based Look-ahead Mechanism for Shop Floor Decision Making,Procedia CIRP,41,,2016,63.

Kumbhakarna N., Chowdhury A.,Pyrolysis of energetic ionic salts based on nitrogen-rich heterocycles,Current Organic Chemistry,20,23,2016,2514.

Kundalkar D., Mavalankar M., Tewari A.,Effect of gas nitriding on the thermal fatigue behavior of martensitic chromium hot-work tool steel,Materials Science and Engineering A,651,,2016,391.

Lad B.K., Shrivastava D., Kulkarni M.S.,Machine Tool Reliability,Machine Tool Reliability,,,2016,1.

Lad P., Somani A., Krishnan K.E., Gupta A., Kartik V.,High-throughput shape classification using support vector machine,Proceedings of the IEEE International Conference on Industrial Technology,2016-May,,2016,854.

Lakdawala A.M., Sharma A., Thaokar R.,A Dual Grid Level Set Method based study on similarity and difference between interface dynamics for surface tension and radial electric field induced jet breakup,Chemical Engineering Science,148,,2016,238.

Liu Y., Bhattacharya A., Kuksenok O., He X., Aizenberg M., Aizenberg J., Balazs A.C.,Computational modeling of oscillating fins that "catch and release" targeted nanoparticles in bilayer flows,Soft Matter,12,5,2016,1374.

Lomate D., Tewari A., Date P.P., Ukhande M., Shegavi G., Singh R.,Effect of induction hardening case depth on residual stresses, microstructural phases and fatigue strength of 38MnVS6 micro alloyed steel,Materials Science and Technology Conference and Exhibition 2016, MS and T 2016,1,,2016,517.

Lyamina E.A., Date P.P.,Planar plastic flow of polymers near very rough walls,Structural Engineering and Mechanics,58,4,2016,707.

Makwana P., Shome M., Goecke S.-F., De A.,Gas metal arc brazing of galvannealed steel sheets,Science and Technology of Welding and Joining,21,7,2016,600.

Manik, D.,State-space approach to transient statistical energy analysis (SEA) to control noise in impact type machines,ICSV 2016 - 23rd International Congress on Sound and Vibration: From Ancient to Modern Acoustics,,,2016,.

Menghani D., Guha A.,Packing Boxes into Multiple Containers Using Genetic Algorithm,Journal of The Institution of Engineers (India): Series C,97,3,2016,441.

Mills, Kenneth C; Karagadde, Shyamprasad; Lee, Peter David; Yuan, Lang; Shahbazian, Fatemeh;,Calculation of Physical Properties for Use in Models of Continuous Casting Process-Part 1: Mould Slags,ISIJ International,56,2,2016,264-273.

Mote, R.G., Xiaomin, L.,Focused ion beam (FIB) nanofinishing for ultra-thin TEM sample preparation,Nanofinishing Science and Technology: Basic and Advanced Finishing and Polishing Processes,,,2016,155.

Mujumdar S.S., Curreli D., Kapoor S.G., Ruzic D.,Model-based prediction of plasma resistance, and discharge voltage and current waveforms in micro-electrodischarge machining,Journal of Micro and Nano-Manufacturing,4,1,2016,11003.

Mujumdar S.S., Curreli D., Kapoor S.G.,Effect of dielectric electrical conductivity on the characteristics of micro electro-discharge machining plasma and material removal,Journal of Micro and Nano-Manufacturing,4,2,2016,21006.

Mukherjee T., Zuback J.S., De A., Deb Roy T.,Heat and fluid flow modeling to examine 3d-printability of alloys,TMS Annual Meeting,,CONFCODENUMBER,2016,471.

Mukherjee T., Zuback J.S., De A., DebRoy T.,Printability of alloys for additive manufacturing,Scientific Reports,6,,2016,.

Muthu, N., Maiti, S.K., Falzon, B.G., Yan, W.,Crack propagation in non-homogenous materials: Evaluation of mixed-mode SIFs, T-stress and kinking angle using a variant of EFG Method,Engineering Analysis with Boundary Elements,72,,2016,11.

Najafi Z., Gautam P., Schwartz B.F., Chandy A.J., Mahajan A.M.,Three-dimensional numerical simulations of peristaltic contractions in obstructed ureter flows,Journal of Biomechanical Engineering,138,10,2016,.

Nandi K., Walker S.P., Date A.W.,High resolution TVD schemes for interface tracking,AIP Conference Proceedings,1738,,2016,480072.

Nitesh P. Yelve, Mira Mitra, P.M. Mujumdar, and C. Ramadas, A hybrid method based upon nonlinear Lamb wave response for locating a delamination in composite laminates, Ultrasonics, 70, , 2016, DOI:10.1016/j.ultras.2016.04.012, 12–17

O. Voznyy, J. H. Mokkath, A. Jain, E. H. Sargent, and U. Schwingenschlogl, “Computational Study of Magic- Size CdSe Clusters with Complementary Passivation by Carboxylic and Amine Ligands.” The Journal of Physical Chemistry C 120, 10015 (2016).

Omar A., Harisankar K.R., Tewari A., Narasimhan K.,Effect of geometric parameters on formability and strain path during tube hydrforming process,Journal of Physics: Conference Series,734,3,2016,32104.

Omar A., Harisankar K.R., Tewari A., Narasimhan K.,Study of fracture behaviour and strain path during tube hydrforming process,Journal of Physics: Conference Series,734,3,2016,32105.

Pande S.S., Dixit U.S.,Editorial,International Journal of Mechatronics and Manufacturing Systems,9,1,2016,1.

Pant C.S., Bhattacharya A.,A viscous sponge layer formulation for robust large eddy simulation of thermal plumes,Computers and Fluids,134-135,,2016,177.

Paramane S.B., Van Der Veken W., Sharma A., Coddé J.,Effects of oil leakage on thermal hydraulic characteristics and performance of a disc-type transformer winding,Applied Thermal Engineering,98,,2016,1130.

Paramane S.B., Van Der Veken W., Sharma A.,A coupled internal-external flow and conjugate heat transfer simulations and experiments on radiators of a transformer,Applied Thermal Engineering,103,,2016,961.

Pare V., Modi S., Jonnalagadda K.N.,Thermo-mechanical behavior and bulk texture studies on AA5052-H32 under dynamic compression,Materials Science and Engineering A,668,,2016,38.

Parle D., Singh R.K., Joshi S.S.,Contribution of specific work of fracture to size effect in microcutting,Machining Science and Technology,20,4,2016,567.

Parle D., Singh R.K., Joshi S.S.,Fracture energy evaluation using J-integral in orthogonal microcutting,Journal of Micro and Nano-Manufacturing,4,1,2016,11002.

Patel H., Mittal R., Darpe A.K., Kulkarni M.S.,Principal component analysis based approach for health assesment of rolling element bearing,ICSV 2016 - 23rd International Congress on Sound and Vibration: From Ancient to Modern Acoustics,,,2016,.

Patidar S., Kumar S., Srivastava A., Singh S.,Dual phase lag model-based thermal analysis of tissue phantoms using lattice Boltzmann method,International Journal of Thermal Sciences,103,,2016,41.

Patil N.D., Bange P.G., Bhardwaj R., Sharma A.,Effects of Substrate Heating and Wettability on Evaporation Dynamics and Deposition Patterns for a Sessile Water Droplet Containing Colloidal Particles,Langmuir,32,45,2016,11958.

Patil N.D., Bhardwaj R., Sharma A.,Droplet impact dynamics on micropillared hydrophobic surfaces,Experimental Thermal and Fluid Science,74,,2016,195.

Patil N.D., Gada V.H., Sharma A., Bhardwaj R.,On dual-grid level-set method for contact line modeling during impact of a droplet on hydrophobic and superhydrophobic surfaces,International Journal of Multiphase Flow,81,,2016,54.

Patil R., Shinde S., Marla D., Joshi S.,Experimental analysis of burr formation in drilling of TI-6AL-4V alloy,International Journal of Mechatronics and Manufacturing Systems,9,3,2016,237.

Patil, Nagesh D; Bange, Prathamesh G; Bhardwaj, Rajneesh; Sharma, Atul;,Effects of substrate heating and wettability on evaporation dynamics and deposition patterns for a sessile water droplet containing colloidal particles,Langmuir,32,45,2016,11958-11972.

Patil, Nagesh D; Bhardwaj, Rajneesh; Sharma, Atul;,Droplet impact dynamics on micropillared hydrophobic surfaces,Experimental Thermal and Fluid Science,74,,2016,195-206.

Patil, Nagesh D; Gada, Vinesh H; Sharma, Atul; Bhardwaj, Rajneesh;,On dual-grid level-set method for contact line modeling during impact of a droplet on hydrophobic and superhydrophobic surfaces,International Journal of Multiphase Flow,81,,2016,54-66.

Patterson, M.K., Krishnan, S., Walters, J.M.,On energy efficiency of liquid cooled HPC datacenters,Proceedings of the 15th InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITherm 2016,,,2016,.

Paul S., Singh R., Yan W.,Thermal model for additive restoration of mold steels using crucible steel,Journal of Manufacturing Processes,24,,2016,346.

Pawar S., Joshi S.S.,Experimental analysis of axial and torsional vibrations assisted tapping of titanium alloy,Journal of Manufacturing Processes,22,,2016,7.

Phadnis A., Kumar S., Srivastava A.,Numerical investigation of thermal response of laser-irradiated biological tissue phantoms embedded with gold nanoshells,Journal of Thermal Biology,61,,2016,16.

Phapale K., Patil S., Singh R., Singh R.K.P.,Comparative study of drilling induced delamination in CFRP with different ply orientation,Key Engineering Materials,705,,2016,227.

Phapale K., Singh R., Patil S., Singh R.K.P.,Delamination Characterization and Comparative Assessment of Delamination Control Techniques in Abrasive Water Jet Drilling of CFRP,Procedia Manufacturing,5,,2016,521.

Pradhan S.K., Obaidurrahman K., Iyer K.N., Gaikwad A.J.,Development, validation and application of multi-point kinetics model in RELAP5 for analysis of asymmetric nuclear transients,Nuclear Engineering and Design,300,,2016,506.

R. Comin, M. K. Crawford, A. H. Said, N. Herron, W. E. Guise, et al. , “Lattice dynamics and the nature of structural transitions in organolead halide perovskites.” Physical Review B 94, 094301 (2016).

Rahimi A., Chandy A.J.,Direct numerical simulations of non-helical and helical stratified turbulent flows,Journal of Turbulence,17,1,2016,1.

Rahul Patil, Sagar Shinde, Deepak Marla and Suhas Joshi,Experimental Analysis of Burr Formation in Drilling of Ti-6Al-4V Alloy,International Journal of Mechatronics and Manufacturing Systems,9,3,2016,215-236.

Rajput N.S., Srivastava A.,Non-intrusive dynamic measurements of nanofluid-based heat transfer phenomena under thermally developing flow regime in the context of compact channels,Experimental Thermal and Fluid Science,74,,2016,271.

Ramamoorthy, S., Zhang, Y., Petrie, T., Fridberger, A., Ren, T., Wang, R., Jacques, S.L., Nuttall, A.L.,Minimally invasive surgical method to detect sound processing in the cochlear apex by optical coherence tomography,Journal of Biomedical Optics,21,2,2016,.

Rane M V, Joshi S M, “Novel Solar Air Heater for Agro Produce”, 13th International Conference Solar iCon 2016,28 to 30 Jan, 2016, New Delhi, INDIA.

Rane M V, Shankargouda S J, Parmar A, “Comparison of Fin Geometry in Solar Collector with Absorber Integrated Heat Storage”, 13th International Conference Solar iCon 2016,28 to 30 Jan, 2016, New Delhi, INDIA

Rane M V, Tareke T R, “Novel Solution Heat Exchanger for A Two Stage Liquid Desiccant based De-humidification System”, 13th International Conference Solar iCon 2016, 28 to 30 Jan, 2016, New Delhi, INDIA.

Rane M V, Uphade D B, Rane A M, “Thermoelectric Multi- Utility Water Heater”, 2016 Purdue Conferences, 11 to 14 Jul 2016, Purdue, USA.

Rane M V, Uphade D B, “Energy Efficient Jaggery Making using Freeze Pre-Concentration of Sugarcane Juice”. Journal of Energy Procedia 90 (2016) 370 – 381, pp

Rane M V, Uphade D B, “Heat Pump for Energy Efficient Sugarcane Juice Freeze Pre-Concentration”, 2016 Purdue Conferences, 11 to 14 Jul 2016, Purdue, USA.

Rane M V, Vedartham D M, Bastakoti N,“Design Integration of Dedicated Outdoor Air System with Variable Refrigerant Flow System”, Shen B, Bhandari M, Rane M V, Mota D,“Low GWP Refrigerants Modelling Study for A Room Air Conditioner Having A Microchannel Evaporator”, 2016 Purdue Conferences, 11 to 14 Jul 2016, Purdue, USA.

Rao S.S., Srivastava A.,Interferometric study of natural convection in a differentially-heated cavity with Al2O3-water based dilute nanofluids,International Journal of Heat and Mass Transfer,92,,2016,1128.

Ravi B.,SMART Foundry 2020,IEEE Potentials,35,4,2016,29.

Renukananda K.H., Ravi B.,Multi-Gate Systems in Casting Process: Comparative Study of Liquid Metal and Water Flow,Materials and Manufacturing Processes,31,8,2016,1091.

Robin C.J., Jonnalagadda K.N.,Effect of size and moisture on the mechanical behavior of SU-8 thin films,Journal of Micromechanics and Microengineering,26,2,2016,.

Roy, Rudra N; Sreedhara, Sheshadri;,Modelling of methanol and H2/CO bluff-body flames using RANS based turbulence models with conditional moment closure model,Applied Thermal Engineering,93,,2016,561-570.

Sahu J., Mishra S.,Limit dome height test of very thin brass sheet considering the scaling effect,Journal of Physics: Conference Series,734,3,2016,32114.

Sankar M., Mirji K.V., Prasad V.V.S., Baligidad R.G., Gokhale A.A.,Purification of Niobium by Electron Beam Melting,High Temperature Materials and Processes,35,6,2016,621.

Sarkar J., Kazy S.K., Gupta A., Dutta A., Mohapatra B., Roy A., Bera P., Mitra A., Sar P.,Biostimulation of indigenous microbial community for bioremediation of petroleum refinery sludge,Frontiers in Microbiology,7,SEP,2016,1407.

Sata A., Ravi B.,Novel Bayesian inference based approach to identify critical parameters affecting mechanical properties of investment castings,72nd World Foundry Congress, WFC 2016,,,2016,157.

Satpal S.B., Guha A., Banerjee S.,Damage identification in aluminum beams using support vector machine: Numerical and experimental studies,Structural Control and Health Monitoring,23,3,2016,446.

Schmale J, Fehrenbacher A, Shrivastava A, Pfefferkorn FE., Calibration of dynamic tool–workpiece interface temperature measurement during friction stir welding., Measurement, 88, , 2016, , 331-342

Shah DS, Kedgley AE, Control of a wrist joint motion simulator: a phantom study, Journal of Biomechanics, 49, 13, 2016, 10.1016/j.jbiomech.2016.07.001, 3061-3068

Shah S., Guha A.,Bearing health monitoring,Tribology in Industry,38,3,2016,297.

Shahane S., Pande S.S.,Development of a Thermo-Physical Model for Multi-spark Wire EDM Process,Procedia Manufacturing,5,,2016,205.

Shaikh J., Sharma A., Bhardwaj R.,On sharp-interface level-set method for heat and/or mass transfer induced Stefan problem,International Journal of Heat and Mass Transfer,96,,2016,458.

Shaikh, Javed; Sharma, Atul; Bhardwaj, Rajneesh;,On sharp-interface level-set method for heat and/or mass transfer induced Stefan problem,International Journal of Heat and Mass Transfer,96,,2016,458-473.

Shakya P., Darpe A.K., Kulkarni M.S.,Bearing diagnosis using proximity probe and accelerometer,Measurement: Journal of the International Measurement Confederation,80,,2016,190.

Sharma P., Kulkarni M.S.,Framework for a dynamic and responsive: Time separated – lean-agile spare parts replenishment system in army,International Journal of Productivity and Performance Management,65,2,2016,207.

Shinde H., Mahajan P., Singh A.K., Singh R., Narasimhan K.,Process modeling and optimization of the staggered backward flow forming process of maraging steel via finite element simulations,International Journal of Advanced Manufacturing Technology,87,43317,2016,1851.

Shrivastava D., Kulkarni M.S., Vrat P.,Integrated design of preventive maintenance and quality control policy parameters with CUSUM chart,International Journal of Advanced Manufacturing Technology,82,43443,2016,2101.

Shrivastava K., Joshi S.S.,Design and development of compliant microgripper-based assembly station,ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE),10,,2016,.

Singh K.K., Kartik V., Singh R.,Segmented cutting coefficient based chatter modeling for highspeed micromilling of Ti6Al4V,ASME 2016 11th International Manufacturing Science and Engineering Conference, MSEC 2016,2,,2016,.

Singh M.K., Yadav D., Arpit S., Mitra S., Saha S.K.,Effect of nanofluid concentration and composition on laminar jet impinged cooling of heated steel plate,Applied Thermal Engineering,100,,2016,237.

Singh N., Agrawal A., Wanaskar K., Kartik V., Joshi S.S.,Analyzing the effect of workpiece stiffness variation on the stability in flank milling of an impeller blade,ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE),2,,2016,.

Singh N., Agrawal A.,Onsager's-principle-consistent 13-moment transport equations,Physical Review E,93,6,2016,.

Sonawane S., Bhandarkar U., Puranik B.,Modeling forced convection nanofluid heat transfer using an Eulerian-Lagrangian approach,Journal of Thermal Science and Engineering Applications,8,3,2016,.

Sonawane, S., Bhandarkar, U., Puranik, B.,Modeling forced convection nanofluid heat transfer using an Eulerian-Lagrangian approach,Journal of Thermal Science and Engineering Applications,8,3,2016,.

Srai J.S., Kumar M., Graham G., Phillips W., Tooze J., Ford S., Beecher P., Raj B., Gregory M., Tiwari M.K., Ravi B., Neely A., Shankar R., Charnley F., Tiwari A.,Distributed manufacturing: scope, challenges and opportunities,International Journal of Production Research,54,23,2016,6917.

Tailor P.B., Agrawal A., Joshi S.S.,Numerical Simulation and Experimentation on Electrochemical Buffing,Journal of Manufacturing Science and Engineering, Transactions of the ASME,138,6,2016,.

Tailor P.B., Agrawal A., Joshi S.S.,Numerical Simulation and Experimentation on Electrochemical Buffing,Journal of Manufacturing Science and Engineering, Transactions of the ASME,138,6,2016,61009.

Takaddus A.T., Gautam P., Chandy A.J.,Numerical simulations of peristalsis in unobstructed human ureters,ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE),3,,2016,.

Tambe P.P., Kulkarni M.S.,Cost based failure consequence approach for identifying critical components for maintenance support decision,Proceedings of the International Conference on Industrial Engineering and Operations Management,8-10 March 2016,,2016,284.

Tambe P.P., Kulkarni M.S.,Methodology for simultaneously optimizing selective maintenance decision and X-control chart parameters,Proceedings of the International Conference on Industrial Engineering and Operations Management,8-10 March 2016,,2016,2491.

Tambe P.P., Kulkarni M.S.,Selective maintenance optimization under schedule and quality constraints,International Journal of Quality and Reliability Management,33,7,2016,1030.

Telrandhe S., Saxena A.K., Sutar P., Mishra S.,Influence of Laser Heat Treatment on Machinability of Ti6Al4V Alloy,Procedia Manufacturing,5,,2016,282.

Tesfay A.G., Gandhi P.S., Pant P., Senthil Kumar P.S.,Voice coil actuator as adhesion measurement technique for micro stereo lithography components,International Journal of ChemTech Research,9,8,2016,519.

Thakar P.S., Bandyopadhyay B., Gandhi P.S.,Sliding mode control for underactuated slosh-container system using collocated and non-collocated linearization,2016 Indian Control Conference, ICC 2016 - Proceedings,,,2016,157.

Tripathi A., Samajdar I., Nie J.F., Tewari A.,Study of grain structure evolution during annealing of a twin-roll-cast Mg alloy,Materials Characterization,114,,2016,157.

Tripathi A., Tewari A., Kanjarla A.K., Srinivasan N., Reddy G.M., Zhu S.M., Nie J.F., Doherty R.D., Samajdar I.,Microstructural Evolution During Multi-Pass Friction Stir Processing of a Magnesium Alloy,Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science,47,5,2016,2201.

Tripathi S., Kumar A., Bala Varun Kumar Y.V., Agrawal A.,Three-dimensional hydrodynamic flow focusing of dye, particles and cells in a microfluidic device by employing two bends of opposite curvature,Microfluidics and Nanofluidics,20,2,2016,1.

Tripathi S., Kumar Y.V.B., Agrawal A., Prabhakar A., Joshi S.S.,Microdevice for plasma separation from whole human blood using bio-physical and geometrical effects,Scientific Reports,6,,2016,.

Tripathi S., Kumar Y.V.B., Agrawal A., Prabhakar A., Joshi S.S.,Microdevice for plasma separation from whole human blood using bio-physical and geometrical effects,Scientific Reports,6,,2016,26749.

Trivedi R.R., Pawaskar D.N., Shimpi R.P.,Enhancement of Dynamic Travel Range of Electrostatically Driven Cantilever Microbeam Using Modified Particle Swarm Optimization,Procedia Engineering,144,,2016,543.

Trivedi R.R., Pawaskar D.N., Shimpi R.P.,Optimization of static and dynamic travel range of electrostatically driven microbeams using particle swarm optimization,Advances in Engineering Software,97,,2016,1.

Varma S.S., Srivastava A.,Real-time two-color interferometric technique for simultaneous measurements of temperature and solutal fields,International Journal of Heat and Mass Transfer,98,,2016,662.

Vasu T.S., Bhandakkar T.K.,A study of the contact of an elastic layer-substrate system indented by a long rigid cylinder incorporating surface effects,Journal of Applied Mechanics, Transactions ASME,83,6,2016,61009.

Vyas D.C.M., Kumar S., Srivastava A.,Porous media based bio-heat transfer analysis on counter-current artery vein tissue phantoms: Applications in photo thermal therapy,International Journal of Heat and Mass Transfer,99,,2016,122.

Vyas V., Gandhi P.,On the dynamics of vibro-impacting tapered cantilever with tip mass,ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE),4B,,2016,.

Warren, R.L., Ramamoorthy, S., Ciganovic, N., Zhang, Y., Wilson, T.M., Petrie, T., Wang, R.K., Jacques, S.L., Reichenbach, T., Nuttall, A.L., Fridberger, A.,Minimal basilar membrane motion in low-frequency hearing,Proceedings of the National Academy of Sciences of the United States of America,113,30,2016,E4304.

Watvisave D.S., Puranik B.P., Bhandarkar U.V.,Modeling wall effects in a micro-scale shock tube using hybrid MD–DSMC algorithm,Shock Waves,26,4,2016,477.

Watvisave, D.S., Puranik, B.P., Bhandarkar, U.V.,Modeling wall effects in a micro-scale shock tube using hybrid MD–DSMC algorithm,Shock Waves,26,4,2016,477.

Wu, T., Ramamoorthy, S., Wilson, T., Chen, F., Porsov, E., Subhash, H., Foster, S., Zhang, Y., Omelchenko, I., Bateschell, M., Wang, L., Brigande, J.V., Jiang, Z.-G., Mao, T., Nuttall, A.L.,Optogenetic Control of Mouse Outer Hair Cells,Biophysical Journal,110,2,2016,493.

X. Chen, D. Bansal, S. Sullivan, D.L. Abernathy, A.A. Aczel, J. Zhou, O. Delaire, and L. Shi,Weak coupling of acoustic-like phonons and magnon dynamics in incommensurate spin ladder compound Sr14Cu24O41,Physical Review B,94,,2016,134309.

Y Bin Baqui, P A Davidson, A Ranjan,Are there two regimes in strongly-rotating turbulence?,Physics of Fluids,28,45103,2016,.

Y. Kim, Z. Yang, A. Jain, O. Voznyy, G. H. Kim, et al. , “Pure Cubic-Phase Hybrid Iodobismuthates AgBi2I7 for Thin-Film Photovoltaics.” Angewandte Chemie International Edition 55, 9586 (2016).

Yadav H., Agrawal A., Srivastava A.,Mixing and entrainment characteristics of a pulse jet,International Journal of Heat and Fluid Flow,61,,2016,749.

Yadav H., Srivastava A., Agrawal A.,Characterization of pulsating submerged Jet-A particle image velocimetry study,Journal of Thermal Science and Engineering Applications,8,1,2016,.

Yadav H., Srivastava A., Agrawal A.,Characterization of pulsating submerged Jet-A particle image velocimetry study,Journal of Thermal Science and Engineering Applications,8,1,2016,11014.

Zine P.U., Kulkarni M.S., Ray A.K., Chawla R.,A conceptual framework for product service system design for machine tools: Issues in Indian context,Benchmarking,23,5,2016,1227.

Zine P.U., Kulkarni M.S., Ray A.K., Chawla R.,Designing flexible service systems: application to machine tools,Journal of Intelligent Manufacturing,27,6,2016,1237.

A. Jain and A. J. H. McGaughey, “Effect of exchange-correlation on the first-principles-driven lattice thermal conductivity prediction of crystalline solids.” Computational Materials Science 110, 115 (2015).

A. Jain and A. J. H. McGaughey, “Strongly anisotropic in-plane thermal transport in single-layer black phos- phorene” Scientific Reports 5, 8501 (2015).

Abraham, S., Kakade, A.B., Vedula, R.P.,Convex surface heat transfer behaviour in the presence of obliquely impinging non-isothermal slot jets,Lecture Notes in Engineering and Computer Science,2218,,2015,1273.

Adake C.V., Bhargava P., Gandhi P.,Effect of surfactant on dispersion of alumina in photopolymerizable monomers and their UV curing behavior for microstereolithography,Ceramics International,41,4,2015,5301.

Agrawal P., Gandhi P.S., Neild A.,Frequency effects on microparticle motion in horizontally actuated open rectangular chambers,Microfluidics and Nanofluidics,19,5,2015,1209.

Ambad P.M., Kulkarni M.S.,A warranty based bilateral multi-issue negotiation approach,Benchmarking,22,7,2015,1247.

Ambad P.M., Kulkarni M.S.,An attractiveness index based approach for warranty optimization,International Journal of Quality and Reliability Management,32,4,2015,415.

Ambekar A., Bhangale R., Chatterjee R., Kulkarni C., Kumar S., Chowdhury A.,Glow-plug-assisted combustion of nitromethane sprays in a constant volume chamber,Applied Thermal Engineering,76,,2015,462.

Ambekar A., Chowdhury A.,A semi-analytical method for determination of burn rates of liquid monopropellant strands,ASPACC 2015 - 10th Asia-Pacific Conference on Combustion,,,2015,.

Ambekar A., Chowdhury A.,Experimental prediction of intrinsic burning rate constants of liquid fuel droplets,ASPACC 2015 - 10th Asia-Pacific Conference on Combustion,,,2015,.

Ambekar A., Chowdhury A.,Instabilities in isopropyl nitrate flames in oxidizing atmospheres,ASPACC 2015 - 10th Asia-Pacific Conference on Combustion,,,2015,.

Ambekar A., Sreedhara S., Chowdhury A.,Burn rate characterization of iso-propyl nitrate - A neglected monopropellant,Combustion and Flame,162,3,2015,836.

Ambekar, Anirudha; Sreedhara, Sheshadri; Chowdhury, Arindrajit;,Burn rate characterization of iso-propyl nitrate–A neglected monopropellant,Combustion and Flame,162,3,2015,836-845.

Anilkumar A., Kartik V.,In-plane parametric instability of a rigid body with a dual-rotor system,ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE),4A-2015,,2015,.

Ardhapurkar P.M., Atrey M.D.,Prediction of two-phase pressure drop in heat exchanger for mixed refrigerant Joule-Thomson cryocooler,IOP Conference Series: Materials Science and Engineering,101,1,2015,12111.

Arora S., Lim C.S., Foo J.Y., Sakharkar M.K., Dixit P., Liu A.Q., Miao J.-M.,Microchip system for monitoring microbial physiological behaviour under drug influences,Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine,223,6,2015,777.

Arul A.J., Iyer K., Verma A.K.,Generalized hybrid approach to adjoint code derivation for efficient uncertainty and reliability studies,International Journal of Systems Assurance Engineering and Management,6,2,2015,172.

Arvind Pattabhiraman, Deepak Marla, and Shiv G. Kapoor,Atomized Dielectric Spray-Based Electric Discharge Machining for Sustainable Manufacturing,Journal of Micro and Nano-Manufacturing,3,4,2015,41008.

Ashraf I., Agrawal A., Khan M.H., Sooraj P., Srivastava A., Sharma A.,Thrust generation and wake structure for flow across a pitching airfoil at low Reynolds number,Sadhana - Academy Proceedings in Engineering Sciences,40,8,2015,2367.

Asjad M., Kulkarni M.S., Gandhi O.P.,An insight to availability for O&M support of mechanical systems,International Journal of Productivity and Quality Management,16,4,2015,462.

Asjad M., Kulkarni M.S., Gandhi O.P.,Optimal support strategy for mechanical systems under contract realm,Benchmarking,22,7,2015,1395.

Awate S., Kalyankar H., Jeeva B., Chowdhury A., Sreedhara S.,Sequential HCCI and DI combustion in a modified diesel engine,ASPACC 2015 - 10th Asia-Pacific Conference on Combustion,,,2015,.

Badgujar A.D., Atrey M.D.,Theoretical and experimental investigations on Stirling-type pulse tube cryocoolers with U-type configuration to achieve temperature below 20 K,Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science,229,6,2015,1112.

Badgujar A.D., Naik H.B., Atrey M.D.,Experimental investigation on stirling type thermally coupled three stage pulse tube cryocoolers with 'U' type configuration,Physics Procedia,67,,2015,513.

Bailoor, Shantanu; Bhardwaj, Rajneesh; Nguyen, Thao D;,Effectiveness of eye armor during blast loading,Biomechanics and modeling in mechanobiology,14,6,2015,1227-1237.

Bhadouriya R., Agrawal A., Prabhu S.V.,Experimental and numerical study of fluid flow and heat transfer in a twisted square duct,International Journal of Heat and Mass Transfer,82,,2015,143.

Bhadouriya R., Agrawal A., Prabhu S.V.,Experimental and numerical study of fluid flow and heat transfer in an annulus of inner twisted square duct and outer circular pipe,International Journal of Thermal Sciences,94,,2015,96.

BHADOURIYA R.A.M.B.I.R., AGRAWAL A.M.I.T., PRABHU S.V.,Laminar flow heat transfer studies in a twisted square duct for constant wall heat flux boundary condition,Sadhana - Academy Proceedings in Engineering Sciences,40,2,2015,467.

Bhapkar U.S., Srivastava A., Agrawal A.,Proper cavity shape can mitigate confinement effect in synthetic jet impingement cooling,Experimental Thermal and Fluid Science,68,,2015,392.

Bhargava M., Tewari A., Mishra S.K.,Forming limit diagram of Advanced High Strength Steels (AHSS) based on strain-path diagram,Materials and Design,85,,2015,149.

Bhide R.R., Singh S.G., Duryodhan V.S., Sridharan A., Agrawal A.,Onset of nucleate boiling and critical heat flux with boiling water in microchannels,Progress in Microscale and Nanoscale Thermal and Fluid Sciences,,,2015,21.

Biradar P., Pande S.S.,Efficient Algorithms for Automated Inspection of Freeform Surfaces,Procedia Manufacturing,1,,2015,35.

Bopche S.B., Sridharan A., Nayak A.K.,Evaluation of contribution of thermal radiation in transferring decay heat to the moderator, in case of 18 rod bundle facility, simulating advanced nuclear reactors,Progress in Nuclear Energy,85,,2015,83.

Brijesh P., Chowdhury A., Sreedhara S.,Advanced combustion methods for simultaneous reduction of emissions and fuel consumption of compression ignition engines,Clean Technologies and Environmental Policy,17,3,2015,615.

Brijesh P., Chowdhury A., Sreedhara S.,The simultaneous reduction of NO x and PM using ultra-cooled EGR and retarded injection timing in a diesel engine,International Journal of Green Energy,12,4,2015,347.

Brijesh, P; Abhishek, S; Sreedhara, S;,Numerical investigation of effect of bowl profiles on performance and emission characteristics of a diesel engine,SAE Technical Paper,,,2015,.

Brijesh, P; Chowdhury, A; Sreedhara, S;,Advanced combustion methods for simultaneous reduction of emissions and fuel consumption of compression ignition engines,Clean Technologies and Environmental Policy,17,3,2015,615-625.

Brijesh, P; Chowdhury, A; Sreedhara, S;,The simultaneous reduction of NOx and PM using ultra-cooled EGR and retarded injection timing in a diesel engine,International journal of green energy,12,4,2015,347-358.

C Shanta, N Harsh, M Bhargava, P Prita, M Sushil, Development of materials model based on microstructure evolution for formability analysis of low-Ni austenitic stainless steel , IOP Conference Series: Materials Science and Engineering, 82, 1, 2015, , 012017

C.W. Li, J. Hong, A. May, D. Bansal, S. Chi, T. Hong, G. Ehlers, and O. Delaire,Orbitally- driven giant phonon anharmonicity in SnSe,Nature Physics,11,,2015,1063-1069.

Cai, B; Karagadde, S; Rowley, D; Marrow, TJ; Connolley, T; Lee, PD;,Time-resolved synchrotron tomographic quantification of deformation-induced flow in a semi-solid equiaxed dendritic Al_Cu alloy,Scripta Materialia,103,,2015,69-72.

Chichani S., Guha A.,A Method of Modeling Fabric Shear using Finite Element Analysis,Journal of The Institution of Engineers (India): Series E,96,1,2015,.

D. Bansal, C.W. Li, A.H. Said, D.L. Abernathy, J-Q. Yan, and O. Delaire,Electron-phonon coupling and thermal transport in the thermoelectric compound Mo3Sb7−xTex,Physical Review B,92,,2015,214301.

Damle R., Atrey M.,Performance analysis of a miniature Joule-Thomson cryocooler with and without the distributed J-T ffect,IOP Conference Series: Materials Science and Engineering,101,1,2015,12168.

Damle R.M., Ardhapurkar P.M., Atrey M.D.,Numerical analysis of the two-phase heat transfer in the heat exchanger of a mixed refrigerant Joule-Thomson cryocooler,Cryogenics,72,,2015,103.

Damle R.M., Atrey M.D.,The cool-down behaviour of a miniature Joule-Thomson (J-T) cryocooler with distributed J-T effect and finite reservoir capacity,Cryogenics,71,,2015,47.

Damle R.M., Atrey M.D.,Transient simulation of a miniature Joule-Thomson (J-T) cryocooler with and without the distributed J-T effect,Cryogenics,65,,2015,49.

Das A., Shome M., Das C.R., Goecke S.-F., De A.,Joining of galvannealed steel and aluminium alloy using controlled short circuiting gas metal arc welding process,Science and Technology of Welding and Joining,20,5,2015,402.

Das S., Gada V.H., Sharma A.,Analytical and Level Set Method-Based Numerical Study for Two-Phase Stratified Flow in a Pipe,Numerical Heat Transfer; Part A: Applications,67,11,2015,1253.

Dasare R.R., Saha S.K.,Numerical study of horizontal ground heat exchanger for high energy demand applications,Applied Thermal Engineering,85,,2015,252.

Deodhar S.D., Kothadia H.B., Iyer K.N., Prabhu S.V.,Experimental and numerical studies of choked flow through adiabatic and diabatic capillary tubes,Applied Thermal Engineering,90,,2015,879.

Dey S., Kartik V.,Intermittent contact dynamics of a micro-cantilever in high speed contact mode scanning probe microscopy,ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE),4A-2015,,2015,.

Dixit P., Henttinen K.,Via Technologies for MEMS,Handbook of Silicon Based MEMS Materials and Technologies: Second Edition,1,1,2015,694.

Dixit U.S., De A.,Editorial,Journal of The Institution of Engineers (India): Series C,96,1,2015,3.

Dongre G., Zaware S., Dabade U., Joshi S.S.,Multi-objective optimization for silicon wafer slicing using wire-EDM process,Materials Science in Semiconductor Processing,39,,2015,793.

Dureja A.K., Pawaskar D.N., Seshu P., Sinha S.K., Sinha R.K.,Experimental determination of thermal contact conductance between pressure and calandria tubes of Indian pressurised heavy water reactors,Nuclear Engineering and Design,284,,2015,60.

Duryodhan V.S., Singh A., Singh S.G., Agrawal A.,Convective heat transfer in diverging and converging microchannels,International Journal of Heat and Mass Transfer,80,,2015,424.

Gaddam A., Agrawal A., Joshi S.S., Thompson M.C.,Utilization of Cavity Vortex to Delay the Wetting Transition in One-Dimensional Structured Microchannels,Langmuir,31,49,2015,13373.

Gaddam A., Garg M., Agrawal A., Joshi S.S.,Modeling of liquid-gas meniscus for textured surfaces: Effects of curvature and local slip length,Journal of Micromechanics and Microengineering,25,12,2015,.

Gaddam A., Garg M., Agrawal A., Joshi S.S.,Modeling of liquid-gas meniscus for textured surfaces: Effects of curvature and local slip length,Journal of Micromechanics and Microengineering,25,12,2015,125002.

Gautam P., Chandy A.J.,Understanding tire acoustics through computational fluid dynamics (CFD) of grooves with deforming walls,American Society of Mechanical Engineers, Noise Control and Acoustics Division (Publication) NCAD,2015-January,,2015,.

Gautam P., Chandy A.J.,Understanding tire acoustics through computational fluid dynamics (CFD) of grooves with deforming walls,INTER-NOISE 2015 - 44th International Congress and Exposition on Noise Control Engineering,,,2015,.

Ghosh D.P., Raj R., Mohanty D., Saha S.K.,Onset of Nucleate Boiling, Void Fraction, and Liquid Film Thickness,Microchannel Phase Change Transport Phenomena,,,2015,5.

Gokhale O.S., Puranik B.P., Ghosh A.K.,Investigation of effect of ballooned fuel pins on quenching behavior: Design of experiment and preliminary analysis,Nuclear Technology,190,1,2015,52.

Gorade S.K., Gandhi P.S., Kurode S.R.,Modeling and output feedback control of Flexible Inverted Pendulum on Cart,Proceedings of the 2015 IEEE International Conference on Power and Advanced Control Engineering, ICPACE 2015,,,2015,436.

Gorade S.K., Kurode S.R., Gandhi P.S.,Modeling of Inverted Elastic Pendulum on Cart with Tip Mass (IEPCTM) system having multiple dynamic equilibria,2015 International Conference on Industrial Instrumentation and Control, ICIC 2015,,,2015,852.

Gudibande N., Iyer K.,Thermal shrinkage based volume of fluid model for predicting the voids during solidification of lead,International Topical Meeting on Nuclear Reactor Thermal Hydraulics 2015, NURETH 2015,4,,2015,3148.

Gujarati P.B., Desai K.P., Naik H.B., Atrey M.D.,Transient analysis of single stage GM type double inlet pulse tube cryocooler,IOP Conference Series: Materials Science and Engineering,101,1,2015,12033.

Gupta N., Ahirrao S.B., Paul S., Singh R.K.,Erratum to: Modeling of micro-scale fiber laser hardening process and optimization via statistical approximation of the engineering models (International Journal of Precision Engineering and Manufacturing, 16, 11, (2015), 2281-2287),International Journal of Precision Engineering and Manufacturing,16,13,2015,2761.

Gupta N., Ahirrao S.B., Paul S., Singh R.K.,Modeling of micro-scale fiber laser hardening process and optimization via statistical approximation of the engineering models,International Journal of Precision Engineering and Manufacturing,16,11,2015,2281.

Haridas D., Rajput N.S., Srivastava A.,Interferometric study of heat transfer characteristics of Al<inf>2</inf>O<inf>3</inf> and SiO<inf>2</inf>-based dilute nanofluids under simultaneously developing flow regime in compact channels,International Journal of Heat and Mass Transfer,88,,2015,713.

Hasan M.N., Chandy A., Choi J.-W.,Numerical analysis of post-impact droplet deformation for direct-print,Engineering Applications of Computational Fluid Mechanics,9,1,2015,543.

Hashiehbaf A., Baramade A., Agrawal A., Romano G.P.,Experimental investigation on an axisymmetric turbulent jet impinging on a concave surface,International Journal of Heat and Fluid Flow,53,,2015,167.

Hindasageri, V., Kuntikana, P., Vedula, R.P., Prabhu, S.V.,An experimental and numerical investigation of heat transfer distribution of perforated plate burner flames impinging on a flat plate,International Journal of Thermal Sciences,94,,2015,156.

Hindasageri, V., Vedula, R.P., Prabhu, S.V.,Heat transfer distribution for three interacting methane-air premixed impinging flame jets,International Journal of Heat and Mass Transfer,88,,2015,914.

Hindasageri, V., Vedula, R.P., Prabhu, S.V.,Heat transfer distribution of swirling flame jet impinging on a flat plate using twisted tapes,International Journal of Heat and Mass Transfer,91,,2015,1128.

Hiremath C., Senthilnathan K., Guha A., Tewari A.,Effect of Volume Fraction on Damage Accumulation for a Lattice Arrangement of Fibers in CFRP,Materials Today: Proceedings,2,43224,2015,2671.

Hurth, Cedric; Bhardwaj, Rajneesh; Andalib, Sahar; Frankiewicz, Christophe; Dobos, Andrew; Attinger, Daniel; Zenhausern, Frederic;,Biomolecular interactions control the shape of stains from drying droplets of complex fluids,Chemical Engineering Science,137,,2015,398-403.

J Sahu, S Mishra, Size effect on mechanical behaviour of SS304, Advances in Material Forming and Joining, , , 2015, , 193-201

JAGAD P.I., PURANIK B.P., DATE A.W.,A novel concept of measuring mass flow rates using flow induced stresses,Sadhana - Academy Proceedings in Engineering Sciences,40,5,2015,1555.

Jeeva B., Awate S., Rajesh J., Chowdhury A., Sheshadri S.,Development of custom-made engine control unit for a research engine,Proceedings on 2014 2nd International Conference on "Emerging Technology Trends in Electronics, Communication and Networking", ET2ECN 2014,,,2015,.

Joshi S., Gupta A.,Conceptual design of an active transtibial prosthesis based on expected joint and muscle forces in a unilateral transtibial Amputee: A modelling study,ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE),42064,,2015,.

Joshi S., Tewari A., Joshi S.S.,Microstructural characterization of chip segmentation under different machining environments in orthogonal machining of Ti6Al4V,Journal of Engineering Materials and Technology, Transactions of the ASME,137,1,2015,11005.

Joshi, Rakshitha U; Soti, Atul K; Bhardwaj, Rajneesh;,CONVECTIVE HEAT TRANSFER AUGEMENTATION BY FLEXIBLE FINS IN LAMINAR CHANNEL PULSATING FLOW,ICHMT DIGITAL LIBRARY ONLINE,,,2015,.

Joshi, Rakshitha U; Soti, Atul K; Bhardwaj, Rajneesh;,Numerical study of heat transfer enhancement by deformable twin plates in laminar heated channel flow,Computational Thermal Sciences: An International Journal,7,43256,2015,.

Kalra S., Desai K.P., Naik H.B., Atrey M.D.,Theoretical study on standing wave thermoacoustic engine,Physics Procedia,67,,2015,456.

Kalyankar H., Awate S., Chowdhury A., Sreedhara S.,Characterization of aberrant behavior of a 3-hole gasoline Port Fuel Injector (PFI) spray,ASPACC 2015 - 10th Asia-Pacific Conference on Combustion,,,2015,.

Karade V., Ravi B.,3D femur model reconstruction from biplane X-ray images: a novel method based on Laplacian surface deformation,International Journal of Computer Assisted Radiology and Surgery,10,4,2015,473.

Karagadde, S; Lee, PD; Cai, B; Fife, JL; Azeem, MA; Kareh, KM; Puncreobutr, C; Tsivoulas, D; Connolley, T; Atwood, RC;,Transgranular liquation cracking of grains in the semi-solid state,Nature Communications,6,,2015,8300.

Kattire P., Paul S., Singh R., Yan W.,Experimental characterization of laser cladding of CPM 9V on H13 tool steel for die repair applications,Journal of Manufacturing Processes,20,,2015,492.

Khan H.H., Aneesh A.M., Sharma A., Srivastava A., Chaudhuri P.,Thermal-hydraulic characteristics and performance of 3D wavy channel based printed circuit heat exchanger,Applied Thermal Engineering,87,,2015,519.

Khan, K., Maiti, S.K.,Delamination detection in a laminated composite beam based on changes in natural frequencies,Mechanisms and Machine Science,23,,2015,519.

Khandelwal H., Ravi B.,Effect of binder composition on the shrinkage of chemically bonded sand cores,Materials and Manufacturing Processes,30,12,2015,1465.

Krishnan S., Kulkarni D.V., De A.,Probing Pulsed Current Gas Metal Arc Welding for Modified 9Cr-1Mo Steel,Journal of Materials Engineering and Performance,24,4,2015,1462.

Kumar A., Yadav A., Zope M., Gupta A., Chowdhury A.,Experimental characterization of a hydrogen-peroxidealcohol-based combustor,ASPACC 2015 - 10th Asia-Pacific Conference on Combustion,,,2015,.

Kumar S., Srivastava A.,Thermal analysis of laser-irradiated tissue phantoms using dual phase lag model coupled with transient radiative transfer equation,International Journal of Heat and Mass Transfer,90,,2015,466.

Kumar Saxena A., Anupoju M., Tewari A., Pant P.,Effect of grain size on deformation twinning behavior of Ti6Al4V alloy,Materials Science Forum,830-831,,2015,337.

Kumbhakarna N.R., Shah K.J., Chowdhury A., Thynell S.T.,Liquid-phase decomposition mechanism of triaminoguanidinium azotetrazolate,ASPACC 2015 - 10th Asia-Pacific Conference on Combustion,,,2015,.

Lad P., Kartik V.,Dynamics and stability of a travelling string subjected to an axial follower force,ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE),4B-2015,,2015,.

Lakdawala A., Gada V.H., Sharma A.,On dual-grid level-set method for computational-electro-multifluid-dynamics simulation,Numerical Heat Transfer, Part B: Fundamentals,67,2,2015,161.

Lakdawala A.M., Thaokar R., Sharma A.,Break-up of a non-Newtonian jet injected downwards in a Newtonian liquid,Sadhana - Academy Proceedings in Engineering Sciences,40,3,2015,819.

Lakdawala A.M., Thaokar R., Sharma A.,DGLSM based study of temporal instability and formation of satellite drop in a capillary jet breakup,Chemical Engineering Science,130,,2015,239.

Lal S., Mallick L., Rajkumar S., Oommen O.P., Reshmi S., Kumbhakarna N., Chowdhury A., Namboothiri I.N.N.,Synthesis and energetic properties of high-nitrogen substituted bishomocubanes,Journal of Materials Chemistry A,3,44,2015,22118.

Laukiavich C.A., Braun M.J., Chandy A.J.,An Investigation into the Thermal Effects on a Hydrodynamic Bearing's Clearance,Tribology Transactions,58,6,2015,980.

M Bhargava, C Shanta, T Asim, M Sushil, Texture developed during deformation of Transformation Induced Plasticity (TRIP) steels , IOP Conference Series: Materials Science and Engineering, 82, 1, 2015, , 012067

Mahto, D.K., Maiti, S.K.,Detection of arbitrary number of new cracks appearing in a beam with pre-existing cracks,Mechanisms and Machine Science,23,,2015,449.

Mali S., Joshi S.S.,Three-dimensional simulation of staggered flow forming process,International Journal of Manufacturing Technology and Management,29,43256,2015,324.

Mallick L., Ambekar A., Lal S., Kumbhakarna N.R., Chowdhury A., Namboothiri I.N.N.,Thermodynamic and thermal characterization of bishomocubane derivatives as possible binders in composite solid propellants,ASPACC 2015 - 10th Asia-Pacific Conference on Combustion,,,2015,.

Mallick L., Kumar S., Chowdhury A.,Thermal decomposition of ammonium perchlorate - A TGA-FTIR-MS study: Part i,Thermochimica Acta,610,,2015,57.

Mallick L., Kumar S., Chowdhury A.,Thermal decomposition of ammonium perchlorate using TGA-FTIR: The effects of particle size,ASPACC 2015 - 10th Asia-Pacific Conference on Combustion,,,2015,.

Manvatkar V., De A., DebRoy T.,Spatial variation of melt pool geometry, peak temperature and solidification parameters during laser assisted additive manufacturing process,Materials Science and Technology (United Kingdom),31,8,2015,924.

Manvatkar V., De A., Svensson L.-E., DeBroy T.,Cooling rates and peak temperatures during friction stir welding of a high-carbon steel,Scripta Materialia,94,,2015,36.

Manvatkar V.D., Gokhale A.A., Reddy G.J., Savitha U., De A.,Investigation on laser engineered net shaping of multilayered structures in H13 tool steel,Journal of Laser Applications,27,3,2015,.

Manvatkar V.D., Gokhale A.A., Reddy G.J., Savitha U., De A.,Investigation on laser engineered net shaping of multilayered structures in H13 tool steel,Journal of Laser Applications,27,3,2015,32010.

Mastud S.A., Kothari N.S., Singh R.K., Joshi S.S.,Modeling debris motion in vibration assisted reverse micro electrical discharge machining process (R-MEDM),Journal of Microelectromechanical Systems,24,3,2015,661.

Mehta M., Reddy G.M., Rao A.V., De A.,Numerical modeling of friction stir welding using the tools with polygonal pins,Defence Technology,11,3,2015,229.

Mirajkar H.N., Tirodkar S., Balasubramanian S.,Experimental study on growth and spread of dispersed particle-laden plume in a linearly stratified environment,Environmental Fluid Mechanics,15,6,2015,1241.

Mody M., Guha A., Seshu P.,A simple strategy for tyre force distribution to improve the performance of a four wheel independent steer-by-wire vehicle,2015 IFToMM World Congress Proceedings, IFToMM 2015,,,2015,.

Mujumdar S.S., Curreli D., Kapoor S.G., Ruzic D.,Modeling of Melt-Pool Formation and Material Removal in Micro-Electrodischarge Machining,Journal of Manufacturing Science and Engineering, Transactions of the ASME,137,3,2015,31007.

Muthu, N., Falzon, B.G., Maiti, S.K., Yan, W.,Micromechanical modelling of non-homogenous materials by meshless methods,ICCM International Conferences on Composite Materials,2015-July,,2015,.

Narasimhan, R., Tandaiya, P., Singh, I., Narayan, R.L., Ramamurty, U.,Fracture in metallic glasses: mechanics and mechanisms,International Journal of Fracture,191,43132,2015,53.

Narayan, R.L., Tandaiya, P., Garrett, G.R., Demetriou, M.D., Ramamurty, U.,On the variability in fracture toughness of 'ductile' bulk metallic glasses,Scripta Materialia,102,,2015,75.

Naveen K., Iyer K.N., Doshi J.B., Vijayan P.K.,Investigations on single-phase natural circulation loop dynamics. Part 3: Role of expansion tank,Progress in Nuclear Energy,78,,2015,65.

Nirgudkar H., Kumar S., Srivastava A.,Solution of Radiative Transfer Equation using Discrete Transfer Method for two-dimensional participating medium,International Communications in Heat and Mass Transfer,61,1,2015,88.

Nitesh P. Yelve, Mira Mitra, and P.M. Mujumdar, Detection of stiffener disbonding in a stiffened aluminium panel using nonlinear Lamb wave, Applied Acoustics, 89, , 2015, DOI:10.1016/j.apacoust.2014.10.010, 267–272

Omar A., Tewari A., Narasimhan K.,Formability and microstructure evolution during hydroforming of drawing quality welded steel tube,Journal of Strain Analysis for Engineering Design,50,7,2015,542.

Orlicz G.C., Balasubramanian S., Vorobieff P., Prestridge K.P.,Mixing transition in a shocked variable-density flow,Physics of Fluids,27,11,2015,114102.

P A Davidson, A Ranjan,Planetary dynamos driven by helical waves-ii.,Geophysical Journal International,202,,2015,1646-1662.

P. Tandaiya, I. Singh, R. L. Narayan and U. Ramamurty,Fracture in metallic glasses: mechanics and mechanisms, International Journal of Fracture,191,1-2,2015,10.1007/s10704-015-9995-3,53

Panchal, V., Bhandarkar, U., Neergat, M., Suresh, K.G.,Synthesis of iron oxide nanoparticles from iron acetylacetonate and cyclopentadienyliron dicarbonyl dimer in low pressure plasma - Effect of plasma parameters on morphology and magnetic properties,International Journal of Nanoscience,14,3,2015,.

Pandurangi S.S., Kulkarni S.S.,Mechanics of wrinkling of a thin film bonded to a compliant substrate under the influence of spatial thermal modulation,International Journal of Solids and Structures,62,,2015,124.

Pant C.S., Bhattacharya A.,The Effect of Initial Droplet Size Spectra on Its Evolution during Turbulent Condensational Growth,Procedia IUTAM,15,,2015,41.

Parayil D.V., Kulkarni S.S., Pawaskar D.N.,Analytical and numerical solutions for thick beams with thermoelastic damping,International Journal of Mechanical Sciences,94-95,,2015,10.

Pare V., Jonnalagadda K.N.,Thermo-Mechanical Behavior of AA-2219 and AA-2195 at High Strain Rates,Conference Proceedings of the Society for Experimental Mechanics Series,65,VOLUME 1,2015,241.

Patidar L., Shaikh T., Chowdhury A.,Numerical simulation of combustion in an n-heptane and gaseous oxygen rocket,ASPACC 2015 - 10th Asia-Pacific Conference on Combustion,,,2015,.

Patii V.H., Manik D.N.,Determination of coupling loss factor (CLF) for right angled plates,22nd International Congress on Sound and Vibration, ICSV 2015,,,2015,.

Patii, V.H., Manik, D.N.,Determination of coupling loss factor (CLF) for right angled plates,22nd International Congress on Sound and Vibration, ICSV 2015,,,2015,.

Paul P K.E., Haridas D., Srivastava A.,Interferometric study of nanofluid-based heat transfer phenomena in compact channels,International Journal of Thermal Sciences,96,,2015,70.

Paul S., Gupta I., Singh R.K.,Characterization and modeling of microscale preplaced powder cladding via fiber laser,Journal of Manufacturing Science and Engineering, Transactions of the ASME,137,3,2015,31019.

Pawar O.A., Gaikhe Y.S., Tewari A., Sundaram R., Joshi S.S.,Analysis of hole quality in drilling GLARE fiber metal laminates,Composite Structures,123,,2015,350.

Powar A., Date P.,Modeling of microstructure and mechanical properties of heat treated components by using Artificial Neural Network,Materials Science and Engineering A,628,,2015,89.

Prabhakar A., Kumar Y.V.B.V., Tripathi S., Agrawal A.,A novel, compact and efficient microchannel arrangement with multiple hydrodynamic effects for blood plasma separation,Microfluidics and Nanofluidics,18,43256,2015,995.

R. L. Narayan, P. Tandaiya, G. R. Garrett, M. D. Demetriou and U. Ramamurty,On the variability in fracture toughness of ‘ductile’ bulk metallic glasses,Scripta Materialia,102,,2015,10.1016/j.scriptamat.2015.02.017

R.R-Dehkharghani, D. Bansal, A. Aref, and G. Dargush,Interface profile optimization for stress wave attenuation in bi-layered plates,Composites Part B: Engineering,82,,2015,129-142.

Ramamoorthy, S., Chen, F., Zha, D., Jacques, S.L., Wang, R., Choudhoury, N., Nuttall, A.L., Fridberger, A.,The second filter's second coming,AIP Conference Proceedings,1703,,2015,.

Ramamoorthy, S., Zhang, Y., Petrie, T., Fridberger, A., Ren, T., Wang, R., Jacques, S.L., Nuttall, A.L.,Two dimensional vibrations of the guinea pig apex organ of Corti measured in vivo using phase sensitive Fourier domain optical coherence tomography,Progress in Biomedical Optics and Imaging - Proceedings of SPIE,9303,,2015,.

Ramamoorthy, S., Zhang, Y., Petrie, T., Jacques, S., Wang, R., Nuttall, A.L.,Development of a phase-sensitive Fourier domain optical coherence tomography system to measure mouse organ of Corti vibrations in two cochlear turns,AIP Conference Proceedings,1703,,2015,.

Rane K.K., Date P.P.,Reduction and densification characteristics of iron oxide metallic waste during solid state recycling,Advanced Powder Technology,26,1,2015,126.

Rane M V, Joshi S M, Bhave D P, “Solar Aluminium Tubular Air Heater”, Third Southern African Solar Energy Conference, SASEC2015, 11-13 May 2015 - Skukuza, Kruger National Park, South Africa.

Rane M V, Joshi S M, “Novel Solar Air Heaters: Offer Early Paybacks”, Journal of the Solar Energy Society of India, Vol 22, 2015, pp

Rane M V, Pinto D I, Vedartham D M, “Energy Conservation using Dedicated Outdoor Air System”, 5th International Conference on Advances in Energy Research, ICAER-2015, 15 to 17 Dec 2015, Mumbai, INDIA.

Rane M V, Rane A M, “Solar Steam Generator with Absorber Integrated Storage”, 5th International Conference on Advances in Energy Research, ICAER-2015, 15 to 17 Dec 2015, Mumbai, INDIA

Rane M V, Shankargouda S J, Parmar A “Thermal Analysis of Solar Collector with Absorber Integrated Heat Storage”, Journal of the Solar Energy Society of India, Vol 22, 2015, pp

Rane M V, Uphade D B, “Energy Efficient Jaggery Making using Freeze Pre- concentration of Sugarcane Juice”, 5th International Conference on Advances in Energy Research, ICAER-2015, 15 to 17 Dec 2015, Mumbai, INDIA.

Rane, M.V., Uphade, D.B.,Energy Efficient Jaggery Making Using Freeze Pre-concentration of Sugarcane Juice,Energy Procedia,90,,2015,370.

Ravi B., Sivaraman S., Sasikumar R., Marwah A.M.,Indigenous Development and Industrial Application of Metal Casting Simulation Software,Transactions of the Indian Institute of Metals,68,6,2015,1227.

Ravi Kumar N.V., Gokhale A.A.,Compressive behaviour of Al-Si-Mg/SiCP foams,Materials Science Forum,830-831,,2015,234.

Ravva S.R., Iyer K.N., Gaikwad A.J.,Development of sump model for containment hydrogen distribution calculations using CFD code,Nuclear Engineering and Design,295,,2015,429.

Roy, Rudra N; Kumar, Sudarshan; Sreedhara, Sheshadri;,Predictions of lift-off height of turbulent methane and propane flames issuing in cold surroundings using conditional moment closure coupled with an extinction model,Combustion and Flame,162,4,2015,1164-1166.

Roy, Rudra N; Sreedhara, Sheshadri;,A numerical study on the influence of airstream dilution and jet velocity on NO emission characteristics of CH4 and DME bluff-body flames,Fuel,142,,2015,73-80.

S. S. Pandurangi and S. S. Kulkarni, Mechanics of wrinkling of a thin film bonded to a compliant substrate under the influence of spatial thermal modulation, International Journal of Solids and Structures, 62, , 2015, 10.1016/j.ijsolstr.2015.02.019, 124 – 133

Sabade V., Joseph T.J., Kartik V.,An analytical design methodology for high speed nanopositioning scanners,ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE),4A-2015,,2015,.

Saha S.K., Dutta P.,Performance Analysis of Heat Sinks With Phase-Change Materials Subjected to Transient and Cyclic Heating,Heat Transfer Engineering,36,16,2015,1349.

Sankar M., Satya Prasad V.V., Baligidad R.G., Alam M.Z., Das D.K., Gokhale A.A.,Microstructure, oxidation resistance and tensile properties of silicide coated Nb-alloy C-103,Materials Science and Engineering A,645,,2015,339.

Sankar M., Satya Prasad V.V., Baligidad R.G., Gokhale A.A.,Effect of vacuum arc remelting and processing parameters on structure and properties of high purity niobium,International Journal of Refractory Metals and Hard Materials,50,,2015,120.

Sant K.D., Bapat S.L.,Effect of operating frequency and phase angle on performance of Alpha Stirling cryocooler driven by a novel compact mechanism,IOP Conference Series: Materials Science and Engineering,101,1,2015,12117.

Sant K.D., Bapat S.L.,Experimental comparison of Pressure ratio in Alpha and Gamma Stirling cryocoolers with identical compression space volumes and driven simultaneously by a solitary novel compact mechanism,IOP Conference Series: Materials Science and Engineering,101,1,2015,12188.

Sarangi, S., Kuhn, W.A., Rider, S., Wright, C., Krishnan, S.,Evaluation of cooling technologies for xeon PHI™ based high performance computing clusters,ASME 2015 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems, InterPACK 2015, collocated with the ASME 2015 13th International Conference on Nanochannels, Microchannels, and Minichannels,1,,2015,.

Sarkar M., Sharma A.,Fully-developed flow in a furrowed wavy channel: Characterization of unsteady flow regimes and its effect on thermal-hydraulic performance,Numerical Heat Transfer; Part A: Applications,68,6,2015,638.

Savitha U., Jagan Reddy G., Venkataramana A., Sambasiva Rao A., Gokhale A.A., Sundararaman M.,Chemical analysis, structure and mechanical properties of discrete and compositionally graded SS316-IN625 dual materials,Materials Science and Engineering A,647,,2015,344.

Savitha U., Reddy G.J., Venkataramana A., Gokhale A.A., Sundararaman M.,Effect of Process Parameters on Solidification Structure and Properties of Laser Deposited SS316 Alloy,Transactions of the Indian Institute of Metals,68,6,2015,1017.

Saxena A.K., Tewari A., Pant P.,Loading and texture bias on the competitive slip activity for basal and prismatic slip systems in HCP alloys,IOP Conference Series: Materials Science and Engineering,82,1,2015,12009.

Saxena A.K., Tewari A., Pant P.,Quantitative analysis of orientation and near neighbor interaction effects during deformation of polycrystalline Ti6Al4V,Materials Science and Engineering A,648,,2015,1.

Sengupta S., Khan M.H., Veluri V.K., Vijayan P.K., Agrawal A., Bhattacharya S.,PIV investigations on the turbulent mixing of two opposing flows inside a scaled chimney model of a research reactor,Experimental Thermal and Fluid Science,63,,2015,115.

Seok J., Idaparapati S., Park H.W., Choi H.-J., Singh R.K., Jun M.,Special issue on environmentally conscious technologies in mechanical engineering,Advances in Mechanical Engineering,7,5,2015,1.

Shaikh A.M.A.G., Srivastava A., Atrey M.D.,Next generation design, development, and evaluation of cryoprobes for minimally invasive surgery and solid cancer therapeutics: In silico and computational studies,OMICS A Journal of Integrative Biology,19,2,2015,131.

Shaikh J., Bhardwaj R., Sharma A.,A Ghost Fluid Method Based Sharp Interface Level Set Method for Evaporating Droplet,Procedia IUTAM,15,,2015,124.

Shaikh T., Patidar L., Chowdhury A.,Experimental characterization of a gasoline-GOX rocket,ASPACC 2015 - 10th Asia-Pacific Conference on Combustion,,,2015,.

Shaikh, Javed; Bhardwaj, Rajneesh; Sharma, Atul;,A ghost fluid method based sharp interface level set method for evaporating droplet,Procedia IUTAM,15,,2015,124-131.

Shakya P., Kulkarni M.S., Darpe A.K.,Bearing diagnosis based on Mahalanobis-Taguchi-Gram-Schmidt method,Journal of Sound and Vibration,337,,2015,342.

Sharma A.,Level set method for computational multi-fluid dynamics: A review on developments, applications and analysis,Sadhana - Academy Proceedings in Engineering Sciences,40,3,2015,627.

Sharma K., Guha A., Pawaskar D.N., Singh R.K.,Impact stress reduction by shell splitting in cask for transporting radioactive material,Annals of Nuclear Energy,79,,2015,111.

Shastri A., McGregor L.M., Liu Y., Harris V., Nan H., Mujica M., Vasquez Y., Bhattacharya A., Ma Y., Aizenberg M., Kuksenok O., Balazs A.C., Aizenberg J., He X.,An aptamer-functionalized chemomechanically modulated biomolecule catch-and-release system,Nature Chemistry,7,5,2015,447.

Shrivastava A, Dingler C, Zinn M, Pfefferkorn FE., Physics-based interpretation of tool-workpiece interface temperature signals for detection of defect formation during friction stir welding., Manufacturing Letters, 5, , 2015, , 7-11

Shrivastava A, Krones M, Pfefferkorn FE., Comparison of energy consumption and environmental impact of friction stir welding and gas metal arc welding for aluminum., CIRP Journal of Manufacturing Science and Technology, 9, , 2015, , 159-168

Shrivastava A, Overcash M, Pfefferkorn FE., Prediction of unit process life cycle inventory (UPLCI) energy consumption in a friction stir weld., Journal of Manufacturing Processes, 18, , 2015, , 46-54

Shrivastava A, Pfefferkorn FE, Duffie NA, Ferrier NJ, Smith CB, Malukhin K, Zinn M., Physics-based process model approach for detecting discontinuity during friction stir welding., The International Journal of Advanced Manufacturing Technology, 79, 1-4, 2015, , 605-614

Simhambhatla S., Karunakaran K.P.,Build strategies for rapid manufacturing of components of varying complexity,Rapid Prototyping Journal,21,3,2015,340.

Singh K.K., Kartik V., Singh R.,Modeling dynamic stability in high-speed micromilling of Ti-6Al-4V via velocity and chip load dependent cutting coefficients,International Journal of Machine Tools and Manufacture,96,,2015,56.

Singh K.K., Singh R., Kartik V.,Comparative Study of Chatter Detection Methods for High-Speed Micromilling of Ti6Al4V,Procedia Manufacturing,1,,2015,593.

Singh R., Bajpai V.,Coolant and lubrication in machining,HandBook of Manufacturing Engineering and Technology,,,2015,981.

Sinha A., Balasubramanian S., Gopalakrishnan S.,A numerical study on dynamics of spray jets,Sadhana - Academy Proceedings in Engineering Sciences,40,3,2015,787.

Sonawane H.A., Joshi S.S.,Analytical modeling of chip geometry in high-speed ball-end milling on inclined Inconel-718 workpieces,Journal of Manufacturing Science and Engineering, Transactions of the ASME,137,1,2015,11005.

Sonawane H.A., Joshi S.S.,Modeling of machined surface quality in high-speed ball-end milling of Inconel-718 thin cantilevers,International Journal of Advanced Manufacturing Technology,78,43443,2015,1751.

Soti, Atul Kumar; Bhardwaj, Rajneesh; Sheridan, John;,Flow-induced deformation of a flexible thin structure as manifestation of heat transfer enhancement,International Journal of Heat and Mass Transfer,84,,2015,1070-1081.

Tailor P.B., Agrawal A., Joshi S.S.,Numerical modeling of passive layer formation and stabilization in electrochemical polishing process,Journal of Manufacturing Processes,18,,2015,107.

Tailor P.B., Agrawal A., Joshi S.S.,Parametric Understanding of Electro-Chemical Buffing (ECB) Using Current-Voltage Characterization,Machining Science and Technology,19,3,2015,440.

Tambe P.P., Kulkarni M.S.,A superimposition based approach for maintenance and quality plan optimization with production schedule, availability, repair time and detection time constraints for a single machine,Journal of Manufacturing Systems,37,,2015,17.

Thalapil, J., Maiti, S.K.,Analysis of coupled transverse and axial vibrations of Euler Bernoulli and Timoshenko beams with longitudinal crack for its detection,Mechanisms and Machine Science,23,,2015,433.

Tripathi A., Tewari A., Srinivasan N., Reddy G.M., Zhu S.M., Nie J.F., Doherty R.D., Samajdar I.,Microstructural Origin of Friction Stir Processed Zone in a Magnesium Alloy,Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science,46,8,2015,3333.

Tripathi S., Bhattacharya A., Singh R., Tabor R.F.,Lubricated Transport of Highly Viscous Non-Newtonian Fluid as Core-annular Flow: A CFD Study,Procedia IUTAM,15,,2015,278.

Tripathi S., Varun Kumar Y.V.B., Prabhakar A., Joshi S.S., Agrawal A.,Passive blood plasma separation at the microscale: A review of design principles and microdevices,Journal of Micromechanics and Microengineering,25,8,2015,.

Tripathi S., Varun Kumar Y.V.B., Prabhakar A., Joshi S.S., Agrawal A.,Passive blood plasma separation at the microscale: A review of design principles and microdevices,Journal of Micromechanics and Microengineering,25,8,2015,83001.

Tripathi S., Varun Kumar Y.V.B., Prabhakar A., Joshi S.S., Agrawal A.,Performance study of microfluidic devices for blood plasma separation - A designer's perspective,Journal of Micromechanics and Microengineering,25,8,2015,.

Tripathi S., Varun Kumar Y.V.B., Prabhakar A., Joshi S.S., Agrawal A.,Performance study of microfluidic devices for blood plasma separation - A designer's perspective,Journal of Micromechanics and Microengineering,25,8,2015,84004.

Trivedi R.R., Bhushan A., Joglekar M.M., Pawaskar D.N., Shimpi R.P.,Enhancement of static and dynamic travel range of electrostatically actuated microbeams using hybrid simulated annealing,International Journal of Mechanical Sciences,98,,2015,93.

Varade V., Agrawal A., Prabhu S.V., Pradeep A.M.,Early onset of flow separation with rarefied gas flowing in a 90° bend tube,Experimental Thermal and Fluid Science,66,,2015,221.

Varade V., Agrawal A., Prabhu S.V., Pradeep A.M.,Velocity measurement in low reynolds and low mach number slip flow through a tube,Experimental Thermal and Fluid Science,60,,2015,284.

Varade V., Agrawal A., Pradeep A.M.,Slip flow through a converging microchannel: Experiments and 3D simulations,Journal of Micromechanics and Microengineering,25,2,2015,.

Varade V., Duryodhan V.S., Agrawal A., Pradeep A.M., Ebrahimi A., Roohi E.,Low Mach number slip flow through diverging microchannel,Computers and Fluids,111,,2015,46.

Varma S.S., Srivastava A.,Performance evaluation of ceiling crystallization for suppressing buoyancy-induced convection in mass transfer applications: An interferometric study,International Journal of Heat and Mass Transfer,84,,2015,61.

Vasu T.S., Bhandakkar T.K.,Semi-analytical solution to plane strain loading of elastic layered coating on an elastic substrate,Sadhana - Academy Proceedings in Engineering Sciences,40,7,2015,2221.

Venugopal A., Agrawal A., Prabhu S.V.,Spanwise correlations in the wake of a circular cylinder and a trapezoid placed inside a circular pipe,Journal of Fluids and Structures,54,,2015,536.

Wang X., Cotter E., Iyer K.N., Fang J., Williams B.J., Biswas P.,Relationship between pyrolysis products and organic aerosols formed during coal combustion,Proceedings of the Combustion Institute,35,2,2015,2347.

Wang, H., Mote, R.G., Zhou, W., Li, E.P., Bai, P.,Backside nanoslot excited sub-wavelength grating-coupled Cu-strip plasmonic waveguides,Journal of Computational and Theoretical Nanoscience,12,6,2015,909.

Wang, H., Zhou, W., Li, E.P., Mote, R.G.,Butterfly-Inspired 2D Periodic Tapered-Staggered Subwavelength Gratings Designed Based on Finite Difference Time Domain Method,Journal of Nanomaterials,2015,,2015,.

Watvisave D.S., Puranik B.P., Bhandarkar U.V.,A hybrid MD-DSMC coupling method to investigate flow characteristics of micro-devices,Journal of Computational Physics,302,,2015,603.

Watvisave, D.S., Puranik, B.P., Bhandarkar, U.V.,A hybrid MD-DSMC coupling method to investigate flow characteristics of micro-devices,Journal of Computational Physics,302,,2015,603.

Z. Liang, A. Jain, A. J. H. McGaughey, and P. Keblinski, “Molecular Simulations and Lattice Dynamics Determination of GaN Thermal Conductivity.” Journal of Applied Physics 118, 125104 (2015).

Zhang Y., Bernard A., Valenzuela J.M., Karunakaran K.P.,Fast adaptive modeling method for build time estimation in Additive Manufacturing,CIRP Journal of Manufacturing Science and Technology,10,,2015,49.

A Ranjan, P A Davidson,Evolution of a turbulent cloud under rotation,Journal of Fluid Mechanics,756,,2014,488-509.

A. Jain and A. J. H. McGaughey, “Thermal conductivity of compound semiconductors: Interplay of mass density and acoustic-optical phonon frequency gap” Journal of Applied Physics 116, 073503 (2014).

Adake C.V., Bhargava P., Gandhi P.S., Kashyap B.,Fabrication of tapered bio mimetic cilia using bulk lithography and ceramic mold,ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014 Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference,1,,2014,.

Agrawal P., Gandhi P.S., Neild A.,Liquid spreading characteristics due to substrate modal vibrations,ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE),4A,,2014,.

Agrawal P., Gandhi P.S., Neild A.,Microparticle response to two-dimensional streaming flows in rectangular chambers undergoing low-frequency horizontal vibrations,Physical Review Applied,2,6,2014,64008.

Agrawal P., Gandhi P.S., Neild A.,Microparticle trapping in streaming flows in open rectangular chambers undergoing low frequency vertical vibrations,ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE),10,,2014,.

Agrawal P., Gandhi P.S., Neild A.,Quantification and comparison of low frequency microparticle collection mechanism in an open rectangular chamber,Journal of Applied Physics,115,17,2014,174505.

Alankar A., Field D.P., Raabe D.,Plastic anisotropy of electro-deposited pure α-iron with sharp crystallographic <1 1 1>// texture in normal direction: Analysis by an explicitly dislocation-based crystal plasticity model,International Journal of Plasticity,52,,2014,18.

Ambekar A., Chowdhury A., Challa S., Radhakrishna D.,Droplet combustion studies of hydrocarbon-monopropellant blends,Fuel,115,,2014,697.

Ardhapurkar P.M., Atrey M.D.,Performance optimization of a miniature Joule-Thomson cryocooler using numerical model,Cryogenics,63,,2014,94.

Ardhapurkar P.M., Sridharan A., Atrey M.D.,Experimental investigation on temperature profile and pressure drop in two-phase heat exchanger for mixed refrigerant Joule-Thomson cryocooler,Applied Thermal Engineering,66,43132,2014,94.

Ardhapurkar P.M., Sridharan A., Atrey M.D.,Flow boiling heat transfer coefficients at cryogenic temperatures for multi-component refrigerant mixtures of nitrogen-hydrocarbons,Cryogenics,59,,2014,84.

Ardhapurkar P.M., Sridharan A., Atrey M.D.,Performance evaluation of heat exchanger for mixed refrigerant J-T cryocooler,Cryogenics,63,,2014,49.

Asjad M., Kulkarni M.S., Gandhi O.P.,A conceptual framework for capturing supportability attributes of a mechanical system,International Journal of Services and Operations Management,17,1,2014,107.

Asjad M., Kulkarni M.S., Gandhi O.P.,Supportability perspectives: Current practices and potential area for future research,International Journal of Industrial and Systems Engineering,17,2,2014,202.

Bajpai V., Singh R.K.,Finite element modeling of orthogonal micromachining of anisotropic pyrolytic carbon via damaged plasticity,Precision Engineering,38,2,2014,300.

Balachandran, R., Maiti, S.K.,Determination of history of dynamic stress intensity factor at low impact velocities using reduced record of experimental forces in three point bend test,International Journal of Fracture,185,43132,2014,195.

Balazs A.C., Bhattacharya A., Tripathi A., Shum H.,Designing bioinspired artificial cilia to regulate particle-surface interactions,Journal of Physical Chemistry Letters,5,10,2014,1691.

Bhapkar U.S., Mohanan S., Agrawal A., Srivastava A.,Interferometry based whole-field heat transfer measurements of an impinging turbulent synthetic jet,International Communications in Heat and Mass Transfer,58,,2014,118.

Bhapkar U.S., Srivastava A., Agrawal A.,Acoustic and heat transfer characteristics of an impinging elliptical synthetic jet generated by acoustic actuator,International Journal of Heat and Mass Transfer,79,,2014,12.

Bharathwaj V., Markan A., Atrey M., Neumann H., Ramalingam R.,Fiber Bragg Gratings for distributed cryogenic temperature measurement in a tube in tube helically coiled heat exchanger,Proceedings of IEEE Sensors,2014-December,December,2014,1535.

Bhardwaj, Rajneesh; Ziegler, Kimberly; Seo, Jung Hee; Ramesh, KT; Nguyen, Thao D;,A computational model of blast loading on the human eye,Biomechanics and modeling in mechanobiology,13,1,2014,123-140.

Bharti G., Ghangale D., Manik D.,Adaptive algorithms for active noise cancellation using time-varying convergence coefficient,Applied Mechanics and Materials,592-594,,2014,2465.

Bharti, G., Ghangale, D., Manik, D.,Adaptive algorithms for active noise cancellation using time-varying convergence coefficient,Applied Mechanics and Materials,592-594,,2014,2465.

Bhattacharya, Anirban; Kiran, Apoorva; Karagadde, Shyamprasad; Dutta, Pradip;,An enthalpy method for modeling eutectic solidification,Journal of Computational Physics,262,,2014,217-230.

Bhole K., Ekshinge S., Gandhi P.,Fabrication of continuously varying thickness micro-cantilever using bulk lithography process,ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014 Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference,1,,2014,.

Bhole K., Gandhi P., Kundu T.,On the evolution of cured voxel in bulk photopolymerization upon focused Gaussian laser exposure,Journal of Applied Physics,116,4,2014,43105.

Bhole K., Gandhi P., Kundu T.,On the formation of photopolymerized voxel with varying focal length during bulk lithography,ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE),10,,2014,.

Bhopale N.N., Joshi S.S., Pawade R.S.,Experimental Investigation into the Effect of Ball End Milling Parameters on Surface Integrity of Inconel 718,Journal of Materials Engineering and Performance,24,2,2014,986.

Bhushan A., Inamdar M.M., Pawaskar D.N.,Design method to achieve high frequency stability of electrostatically actuated doubly-clamped nano-oscillators,Proceedings of the ASME Design Engineering Technical Conference,4,,2014,.

Bhushan A., Inamdar M.M., Pawaskar D.N.,Simultaneous planar free and forced vibrations analysis of an electrostatically actuated beam oscillator,International Journal of Mechanical Sciences,82,,2014,90.

Brijesh, P; Harshvardhan, A; Sreedhara, S;,A study of combustion and emissions characteristics of a compression ignition engine processes using a numerical tool,International Journal of Advances in Engineering Sciences and Applied Mathematics,6,43132,2014,17-30.

Cai, B; Karagadde, S; Yuan, L; Marrow, TJ; Connolley, T; Lee, PD;,In situ synchrotron tomographic quantification of granular and intragranular deformation during semi-solid compression of an equiaxed dendritic Al_Cu alloy,Acta Materialia,76,,2014,371-380.

Chakrabarty S., Mishra S.K., Pant P.,Crystallographic orientation and boundary effects on misorientation development in austenitic stainless steel,Materials Science and Engineering A,617,,2014,228.

Chawla J.S., Suryanarayanan S., Puranik B., Sheridan J., Falzon B.G.,Efficiency improvement study for small wind turbines through flow control,Sustainable Energy Technologies and Assessments,7,,2014,195.

D.C. Rai, S.K. Jain, C.V.R. Murty, and D. Bansal,Large capacity reaction floor-wall assembly for pseudo-dynamic testing at IIT Kanpur and its load rating,Current Science,106,,2014,93-100.

Das H., Jana S.S., Pal T.K., De A.,Numerical and experimental investigation on friction stir lap welding of aluminium to steel,Science and Technology of Welding and Joining,19,1,2014,69.

Date P.,Effect of mesh size on calculation of strain non-uniformity index in drawn sheet metal parts,Procedia Engineering,81,,2014,945.

De A., Bhadeshia H.K.D.H., Debroy T.,Friction stir welding of mild steel: Tool durability and steel microstructure,Materials Science and Technology (United Kingdom),30,9,2014,1050.

Deepak Marla, Upendra V. Bhandarkar and Suhas S. Joshi,A model of laser ablation with temperature-dependent material properties, vaporization, phase explosion and plasma shielding,Applied Physics A: Materials Science and Processing,116,1,2014,273-285.

Deepak Marla, Upendra V. Bhandarkar and Suhas S. Joshi,Models for predicting temperature dependence of material properties of aluminum,Journal of Physics D: Applied Physics,47,10,2014,105306.

Deshmukh, P.W., Vedula, R.P.,Heat transfer and friction factor characteristics of turbulent flow through a circular tube fitted with vortex generator inserts,International Journal of Heat and Mass Transfer,79,,2014,551.

Dixit U.S., De A.,Editorial,Journal of The Institution of Engineers (India): Series C,95,4,2014,293.

Dureja A.K., Sinha S.K., Pawaskar D.N., Seshu P., Chakravartty J.K., Sinha R.K.,Modelling flow and work hardening behaviour of cold worked Zr-2.5Nb pressure tube material in the temperature range of 30-600 ÌŠC,Nuclear Engineering and Design,269,,2014,52.

Duryodhan V.S., Singh S.G., Agrawal A.,Liquid flow through converging microchannels and a comparison with diverging microchannels,Journal of Micromechanics and Microengineering,24,12,2014,.

Gandhi P., Meena J.,Chaos in inverted flexible pendulum with tip mass,ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE),4B,,2014,.

Ghangale D., Manik D.,New time varying hybrid active noise control system with online secondary path modelling,Applied Mechanics and Materials,592-594,,2014,2455.

Ghangale, D., Manik, D.,New time varying hybrid active noise control system with online secondary path modelling,Applied Mechanics and Materials,592-594,,2014,2455.

Goel S., Joshi S.S., Abdelal G., Agrawal A.,Molecular dynamics simulation of nanoindentation of Fe3C and Fe4C,Materials Science and Engineering A,597,,2014,331.

Gokhale O.S., Puranik B.P.,Performance of two fluid model based numeric tool with pressure and enthalpy as independent variables for simulation of two phase flow in axial and radial direction,Kerntechnik,79,2,2014,123.

Gorade S.K., Kurode S.R., Gandhi P.S.,Modeling and sliding mode control of flexible structure,International Conference on Control, Automation and Systems,,,2014,787.

Goyal M., Chakravarty A., Atrey M.D.,Two dimensional model for multistream plate fin heat exchangers,Cryogenics,61,,2014,70.

Guha A., Lawrence G.A.,A wave interaction approach to studying non-modal homogeneous and stratified shear instabilities,Journal of Fluid Mechanics,755,,2014,336.

Hascoet J.Y., Karunakaran K.P., Marya S.,Additive manufacturing viewed from material science: State of the art & fundamentals,Materials Science Forum,783-786,,2014,2284.

Hascoet J.Y., Karunakaran K.P., Marya S.,Additive manufacturing viewed from material science: State of the art & fundamentals,Materials Science Forum,783-786,,2014,2347.

Hindasageri, V., Vedula, R.P., Prabhu, S.V.,A novel concept to estimate the steady state heat flux from impinging premixed flame jets in an enclosure by numerical IHCP technique,International Journal of Heat and Mass Transfer,79,,2014,342.

Hindasageri, V., Vedula, R.P., Prabhu, S.V.,A novel method of estimation of adiabatic wall temperature for impinging premixed flame jets,International Journal of Heat and Mass Transfer,77,,2014,185.

Hindasageri, V., Vedula, R.P., Prabhu, S.V.,Heat transfer distribution for impinging methane-air premixed flame jets,Applied Thermal Engineering,73,1,2014,459.

Honkalaskar, V.H., Sohoni, M., Bhandarkar, U.V.,A participatory decision making process for community-level water supply,Water Policy,16,1,2014,39.

Honkalaskar, V.H., Sohoni, M., Bhandarkar, U.V.,Thermo-chemical modelling of a village cookstove for design improvement,Combustion Theory and Modelling,18,3,2014,414.

Hulke U., Gupta A.,Single camera based motion tracking for minimally invasive surgery,2014 22nd Mediterranean Conference on Control and Automation, MED 2014,,,2014,356.

Jain M., John B., Iyer K.N., Prabhu S.V.,Characterization of the full cone pressure swirl spray nozzles for the nuclear reactor containment spray system,Nuclear Engineering and Design,273,,2014,131.

Joshi S., Pawar P., Tewari A., Joshi S.S.,Effect of β phase fraction in titanium alloys on chip segmentation in their orthogonal machining,CIRP Journal of Manufacturing Science and Technology,7,3,2014,191.

Joshi S., Pawar P., Tewari A., Joshi S.S.,Influence of β phase fraction on deformation of grains in and around shear bands in machining of titanium alloys,Materials Science and Engineering A,618,,2014,71.

Joshi S., Pawar P., Tewari A., Joshi S.S.,Tool wear mechanisms in machining of three titanium alloys with increasing β-phase fraction,Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture,228,9,2014,1090.

Joshi S.S., Marla D.,Electrochemical Micromachining,Comprehensive Materials Processing,11,,2014,373.

K. D. Parrish, A. Jain, J. Larkin, W. A. Saidi, and A. J. H. McGaughey, “Origins of Thermal Conductivity Changes in Strained Systems” Physical Review B 90, 235201 (2014).

Kanawade V.P., Tripathi S.N., Siingh D., Gautam A.S., Srivastava A.K., Kamra A.K., Soni V.K., Sethi V.,Observations of new particle formation at two distinct Indian subcontinental urban locations,Atmospheric Environment,96,,2014,370.

Karade V., Ravi B.,Analysis on anatomical references to assess the coronal alignment of tibial and femoral cuts in mega prosthetic knee replacement,Journal of Orthopaedics and Traumatology,15,2,2014,87.

Karagadde, S; Yuan, L; Shevchenko, N; Eckert, S; Lee, PD;,3-D microstructural model of freckle formation validated using in situ experiments,Acta Materialia,79,,2014,168-180.

Khandelwal S., Karandikar M., Gupta A.,Design and evaluation of a peaucellier-lipkin linkage based haptic interface,Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics),8618,,2014,360.

Kumar R.V., Patel H.S., Srivastava A.,Development of genetic algorithm based approach for limited data projections: Applications in diffuse optical tomography,Proceedings 12th International Conference on Fiber Optics and Photonics, Photonics 2014,,,2014,.

Kumar S., Srivastava A.,Numerical investigation of thermal response of laser irradiated tissue phantoms embedded with optical inhomogeneities,International Journal of Heat and Mass Transfer,77,,2014,262.

Kumbhakarna N., Thynell S.T.,Development of a reaction mechanism for liquid-phase decomposition of guanidinium 5-amino tetrazolate,Thermochimica Acta,582,,2014,25.

Kumbhakarna N.R., Shah K.J., Chowdhury A., Thynell S.T.,Identification of liquid-phase decomposition species and reactions for guanidinium azotetrazolate,Thermochimica Acta,590,,2014,51.

Kurode S., Spurgeon S., Bandyopadhyay B., Gandhi P.S.,Sliding mode control for slosh-free motion using nonlinear sliding surface,2009 European Control Conference, ECC 2009,,,2014,2134.

Lakdawala A.M., Gada V.H., Sharma A.,A dual grid level set method based study of interface-dynamics for a liquid jet injected upwards into another liquid,International Journal of Multiphase Flow,59,,2014,206.

Lal S., Rajkumar S., Tare A., Reshmi S., Chowdhury A., Namboothiri I.N.N.,Nitro-substituted bishomocubanes: Synthesis, characterization, and application as energetic materials,Chemistry - An Asian Journal,9,12,2014,3533.

Laukiavich C.A., Braun M.J., Chandy A.J.,A comparison between the performance of ferro- and magnetorheological fluids in a hydrodynamic bearing,Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology,228,6,2014,649.

Leng Z., Field D.P., Alankar A.,Dislocation density based crystal plasticity finite element simulation of Al bicrystal with grain boundary effects,Materials Research Society Symposium Proceedings,1651,,2014,.

Limaye, M.D., Vedula, R.P., Prabhu, S.V.,Influence of the shape of the orifice on the local heat transfer distribution of a flat plate impinged by under-expanded sonic jets,Experimental Heat Transfer,27,5,2014,403.

Manvatkar V., De A., Debroy T.,Heat transfer and material flow during laser assisted multi-layer additive manufacturing,Journal of Applied Physics,116,12,2014,.

Marla D., Bhandarkar U.V., Joshi S.S.,A model of laser ablation with temperature-dependent material properties, vaporization, phase explosion and plasma shielding,Applied Physics A: Materials Science and Processing,116,1,2014,273.

Marla D., Bhandarkar U.V., Joshi S.S.,Models for predicting temperature dependence of material properties of aluminum,Journal of Physics D: Applied Physics,47,10,2014,105306.

Marla, D., Bhandarkar, U.V., Joshi, S.S.,A model of laser ablation with temperature-dependent material properties, vaporization, phase explosion and plasma shielding,Applied Physics A: Materials Science and Processing,116,1,2014,273.

Marla, D., Bhandarkar, U.V., Joshi, S.S.,Models for predicting temperature dependence of material properties of aluminum,Journal of Physics D: Applied Physics,47,10,2014,.

Mastud S.A., Kothari N.S., Singh R.K., Samuel J., Joshi S.S.,Analysis of debris motion in vibration assisted reverse micro electrical discharge machining,ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014 Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference,1,,2014,.

Mehta M., De A., DebRoy T.,Material adhesion and stresses on friction stir welding tool pins,Science and Technology of Welding and Joining,19,6,2014,534.

Mikutski V., Smorygo O., Shchurevich D., Marukovich A., Ilyushchenko A., Gokhale A., Nadella R., Sadykov V., Usoltsev V.,Open-cell metal-SiC composite foams made by electrolytic codeposition on polyurethane substrates,Powder Metallurgy and Metal Ceramics,52,43382,2014,545.

Mishra S.K., Tiwari S.M., Carter J.T., Tewari A.,Texture evolution during annealing of AZ31 Mg alloy rolled sheet and its effect on ductility,Materials Science and Engineering A,599,,2014,1.

Modi R., Khan A., Joshi M., Ganju S., Singh A.K., Srivastava A., Sapra B.K., Mayya Y.S.,Metal oxide aerosol dry deposition in laminar pipe flow at high thermal gradients and comparison with SOPHAEROS module of ASTEC reactor accident analysis code,Annals of Nuclear Energy,64,,2014,107.

Mohanan S., Srivastava A.,Application of the windowed-Fourier-transform-based fringe analysis technique for investigating temperature and concentration fields in fluids,Applied Optics,53,11,2014,2331.

Mujumdar S., Curreli D., Kapoor S.G., Ruzic D.,A model of micro electro-discharge machining plasma discharge in deionized water,Journal of Manufacturing Science and Engineering, Transactions of the ASME,136,3,2014,31011.

Mujumdar S.S., Curreli D., Kapoor S.G., Ruzic D.,Modeling of melt-pool formation and material removal in micro electro-discharge machining,ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014 Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference,1,,2014,.

Murayama K., Tsukamoto K., Srivastava A., Miura H., Yokoyama E., Kimura Y.,Measurement of two-dimensional distribution of surface supersaturation over a sodium chlorate crystal surface using multidirectional interferometry,Crystal Research and Technology,49,5,2014,315.

Muthu, N., Falzon, B.G., Maiti, S.K., Khoddam, S.,Modified crack closure integral technique for extraction of SIFs in meshfree methods,Finite Elements in Analysis and Design,78,,2014,25.

Muthu, N.M., Maiti, S.K., Yan, W.,Analysis of cracks in Bi-materials/composites with variable order singularity using meshless method,11th World Congress on Computational Mechanics, WCCM 2014, 5th European Conference on Computational Mechanics, ECCM 2014 and 6th European Conference on Computational Fluid Dynamics, ECFD 2014,,,2014,2677.

Nagahanumaiah, Ravi B.,Indirect Rapid Tooling,Comprehensive Materials Processing,10,,2014,345.

Narayan, R.L., Tandaiya, P., Narasimhan, R., Ramamurty, U.,Wallner lines, crack velocity and mechanisms of crack nucleation and growth in a brittle bulk metallic glass,Acta Materialia,80,,2014,407.

Naveen K., Iyer K.N., Doshi J.B., Vijayan P.K.,Investigations on single-phase natural circulation loop dynamics part 1: Model for simulating start-up from rest,Progress in Nuclear Energy,76,,2014,148.

Naveen K., Iyer K.N., Doshi J.B., Vijayan P.K.,Investigations on single-phase natural circulation loop dynamics. Part 2: Role of wall constitutive laws,Progress in Nuclear Energy,75,,2014,105.

Nitesh P. Yelve, Mira Mitra, and P.M. Mujumdar, Higher harmonics induced in Lamb wave due to partial debonding of piezoelectric wafer transducers, NDT&E International, 63, , 2014, DOI:10.1016/j.ndteint.2014.01.004, 21–27

Nitesh P. Yelve, Mira Mitra, and Prasanna M. Mujumdar, Spectral damage index for estimation of breathing crack depth in an aluminum plate using nonlinear Lamb wave, Structural Control and Health Monitoring, 21, 5, 2014, DOI:10.1002/stc.1604, 833–846

Panchal, V., Bhandarkar, U., Neergat, M., Suresh, K.G.,Controlling magnetic properties of iron oxide nanoparticles using post-synthesis thermal treatment,Applied Physics A: Materials Science and Processing,114,2,2014,537.

Paramane S.B., Joshi K., Van Der Veken W., Sharma A.,CFD study on thermal performance of radiators in a power transformer: Effect of blowing direction and offset of fans,IEEE Transactions on Power Delivery,29,6,2014,2596.

Parle D., Singh R.K., Joshi S.S., Ravikumar G.V.V.,Modeling of microcrack formation in orthogonal machining,International Journal of Machine Tools and Manufacture,80-81,,2014,18.

Patil O., Gandhi P.,On the dynamics and multiple equilibria of an inverted flexible pendulum with tip mass on a cart,Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME,136,4,2014,41017.

Patil S., Joshi S., Tewari A., Joshi S.S.,Modelling and simulation of effect of ultrasonic vibrations on machining of Ti6Al4V,Ultrasonics,54,2,2014,694.

Patil, Nagesh D; Bhardwaj, Rajneesh;,Evaporation of a sessile microdroplet on a heated hydrophobic substrate,Int. J. Micronano Scale Transp,5,2,2014,51-58.

Paul S., Ashraf K., Singh R.,Residual stress modeling of powder injection laser surface cladding for die repair applications,ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014 Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference,2,,2014,V002T02A092.

Pawar S., Patil S., Joshi S., Singh R.,An experimental analysis of ultrasonic vibration assisted tapping of Ti-6Al-4V,SAE Technical Papers,4,,2014,.

Phatak A.M., Pande S.S.,Efficient strategies for hollowing of parts in rapid prototyping,Transactions of the North American Manufacturing Research Institution of SME,42,January,2014,1.

Prabhu S.V., Mahulikar S.P.,Effects of density and thermal conductivity variations on entropy generation in gas micro-flows,International Journal of Heat and Mass Transfer,79,,2014,472.

R. L. Narayan, P. Tandaiya, R. Narasimhan and U. Ramamurty,Wallner lines, crack velocity and mechanisms of fracture in a brittle bulk metallic glass,Acta Materialia,80,,2014,10.1016/j.actamat.2014.07.024,407

Raghavan R.S., Tiwari S.M., Mishra S.K., Carsley J.E.,Recovery quantification and onset of recrystallization in aluminium alloys,Philosophical Magazine Letters,94,12,2014,755.

Ramamoorthy, S., Zha, D., Chen, F., Jacques, S.L., Wang, R., Choudhury, N., Nuttall, A.L., Fridberger, A.,Filtering of acoustic signals within the hearing organ,Journal of Neuroscience,34,27,2014,9051.

Rane K.K., Date P.P.,Rheological investigation of MIM feedstocks for reducing frictional effects during injection moulding,Advanced Materials Research,966-967,,2014,196.

Rane M V, Hundiwale A S, “Hybrid Air Conditioning System”, International Sorption Heat Pump Conference, ISHPC 2014, 31 Mar to 2 Apr 2014, Maryland, USA.

Rane M V, Mehta J R, “Two Stage Regeneration of Liquid Desiccant using Solar Energy”, International Sorption Heat Pump Conference, ISHPC 2014, 31 Mar to 2 Apr 2014, Maryland, USA

Rane M V, “DOAS with Evaporative Precooling with Exhaust Air using Rotating Contacting Device”, International Conference on Energy and Indoor Environment for Hot Climate, Feb 24 to 26, 2014, Doha, Qatar.

Rane M V, “Indirect Evaporative Precooling of Fresh Air using Heat Exchangers with Enhanced Flow Passages”, International Conference on Energy and Indoor Environment for Hot Climate, Feb 24 to 26, 2014, Doha, Qatar.

Rane M V, “Multi Utility Evaporative Cooler Diabetic Contacting Device”, International Conference on Energy and Indoor Environment for Hot Climate, Feb 24 to 26, 2014, Doha, Qatar.

Rane, M.V., Chavan, S.A.,DOAS with evaporative precooling of exhaust air using rotating contacting device,1st International Conference on Energy and Indoor Environment for Hot Climates,,,2014,248.

Rane, M.V., Chavan, S.A.,Indirect evaporative precooling of fresh air using heat exchangers with enhanced flow passages,1st International Conference on Energy and Indoor Environment for Hot Climates,,,2014,32.

Rane, M.V., Singh, N.,Multi utility evaporative cooler with diabatic contacting device,1st International Conference on Energy and Indoor Environment for Hot Climates,,,2014,280.

Ravi B.,E-foundry: Free online learning resources in casting design and simulation,71st World Foundry Congress: Advanced Sustainable Foundry, WFC 2014,,,2014,.

Ravi Kumar N.V., Ramachandra Rao N., Gokhale A.A.,Effect of SiC particle content on foaming and mechanical properties of remelted and diluted A356/SiC composite,Materials Science and Engineering A,598,,2014,343.

Ravva S.R., Iyer K.N., Gupta S.K., Gaikwad A.J.,CFD code benchmark against the air/helium tests performed in the MISTRA facility,Annals of Nuclear Energy,69,,2014,37.

Ravva S.R., Iyer K.N., Gupta S.K., Gaikwad A.J.,Implementation and validation of the condensation model for containment hydrogen distribution studies,Nuclear Engineering and Design,270,,2014,34.

Ray M.P., Puranik B.P., Bhandarkar U.V.,Development and assessment of several high-resolution schemes for compressible Euler equations,International Journal of Computational Methods,11,1,2014,.

Ray, M.P., Puranik, B.P., Bhandarkar, U.V.,Development and assessment of several high-resolution schemes for compressible Euler equations,International Journal of Computational Methods,11,1,2014,.

Robin C.J., Vishnoi A., Jonnalagadda K.N.,Mechanical behavior and anisotropy of spin-coated SU-8 thin films for MEMS,Journal of Microelectromechanical Systems,23,1,2014,168.

Roy, Rudra N; Kumar, Sudarshan; Sreedhara, Sheshadri;,A new approach to model turbulent lifted CH4/air flame issuing in a vitiated coflow using conditional moment closure coupled with an extinction model,Combustion and Flame,161,1,2014,197-209.

Rucki C., Chandy A.J.,Towards FFT-based direct numerical simulations of turbulent flows on a GPU,International Journal of Modeling, Simulation, and Scientific Computing,5,1,2014,.

Saha S.K., Baelmans M.,A design method for rectangular microchannel counter flow heat exchangers,International Journal of Heat and Mass Transfer,74,,2014,1.

Sahu S.N., Gokhale A.A., Mehra A.,Modeling nucleation and growth of bubbles during foaming of molten aluminum with high initial gas supersaturation,Journal of Materials Processing Technology,214,1,2014,1.

Sata A., Ravi B.,Comparison of some neural network and multivariate regression for predicting mechanical properties of investment casting,Journal of Materials Engineering and Performance,23,8,2014,2953.

Shah DS, Ghyar R, Ravi B, Hegde C, Shetty V, Morphological measurements of knees in Indian population: Comparison to knee prostheses, Open Journal of Rheumatology and Autoimmune Diseases, 4, 2, 2014, 10.4236/ojra.2014.42012, 75-85

Shakya P., Kulkarni M.S., Darpe A.K.,A novel methodology for online detection of bearing health status for naturally progressing defect,Journal of Sound and Vibration,333,21,2014,5614.

Sharma D., Kumar P., Date P.P., Apte P.R.,Novel design of valve stem to eliminate buckling,Applied Mechanics and Materials,575,,2014,311.

Sharma K., Pawaskar D.N., Guha A., Singh R.K.,Optimization of cask for transport of radioactive material under impact loading,Nuclear Engineering and Design,273,,2014,190.

Shi, X., Zhang, F., Urdang, Z., Dai, M., Neng, L., Zhang, J., Chen, S., Ramamoorthy, S., Nuttall, A.L.,Thin and open vessel windows for intra-vital fluorescence imaging of murine cochlear blood flow,Hearing Research,313,,2014,38.

Shrivastava A, Williams B, Siahpush AS, Savage B, Crepeau J., Numerical and experimental investigation of melting with internal heat generation within cylindrical enclosures., Applied Thermal Engineering, 67, 1-2, 2014, , 587-596

Singh N., Agrawal A.,The Burnett equations in cylindrical coordinates and their solution for flow in a microtube,Journal of Fluid Mechanics,751,,2014,121.

Singh N., Dongari N., Agrawal A.,Analytical solution of plane Poiseuille flow within Burnett hydrodynamics,Microfluidics and Nanofluidics,16,43132,2014,403.

Singh N., Gavasane A., Agrawal A.,Analytical solution of plane Couette flow in the transition regime and comparison with Direct Simulation Monte Carlo data,Computers and Fluids,97,,2014,177.

Soni G., Gupta S., Singh R., Mitra M., Yan W., Falzon B.G.,Study of localized damage in composite laminates using micro-macro approach,Composite Structures,113,1,2014,1.

Soni G., Singh R., Mitra M., Falzon B.G.,Modelling matrix damage and fibre-matrix interfacial decohesion in composite laminates via a multi-fibre multi-layer representative volume element (M2RVE),International Journal of Solids and Structures,51,2,2014,449.

Srinivas Rao S., Srivastava A.,Interferometry-based whole field investigation of heat transfer characteristics of dilute nanofluids,International Journal of Heat and Mass Transfer,79,,2014,166.

Sutaria M., Ravi B.,Computation of casting solidification feed-paths using gradient vector method with various boundary conditions,International Journal of Advanced Manufacturing Technology,75,43191,2014,209.

Tambe P.P., Kulkarni M.S.,A novel approach for production scheduling of a high pressure die casting machine subjected to selective maintenance and a sampling procedure for quality control,International Journal of Systems Assurance Engineering and Management,5,3,2014,407.

Thakar P.S., Bandyopadhyay B., Gandhi P.S.,Sliding mode control for a class of underactuated systems using feedforward normal form: A slosh-container system,Proceedings of IEEE Workshop on Applications of Computer Vision,,,2014,6881153.

Thalapil, J., Maiti, S.K.,Detection of longitudinal cracks in long and short beams using changes in natural frequencies,International Journal of Mechanical Sciences,83,,2014,38.

Tripathi S., Chakravarty P., Agrawal A.,On non-monotonic variation of hydrodynamically focused width in a rectangular microchannel,Current Science,107,8,2014,1260.

Varade V., Agrawal A., Pradeep A.M.,Experimental study of rarefied gas flow near sudden contraction junction of a tube,Physics of Fluids,26,6,2014,.

Venugopal A., Agrawal A., Prabhu S.V.,Note: A vortex cross-correlation flowmeter with enhanced turndown ratio,Review of Scientific Instruments,85,6,2014,.

Venugopal A., Agrawal A., Prabhu S.V.,Performance evaluation of piezoelectric and differential pressure sensor for vortex flowmeters,Measurement: Journal of the International Measurement Confederation,50,1,2014,10.

Vishnu Kumar R., Pate H.S., Srivastava A.,Development of genetic algorithm based approach for limited data projections: Applications in diffuse optical tomography,International Conference on Fibre Optics and Photonics, 2014,,,2014,.

Watvisave D.S., Bhandarkar U.V., Puranik B.P.,Effects of wall conduction and rarefaction on shock propagation in a micro-channel,Shock Waves,24,3,2014,295.

Watvisave, D.S., Bhandarkar, U.V., Puranik, B.P.,Effects of wall conduction and rarefaction on shock propagation in a micro-channel,Shock Waves,24,3,2014,295.

Yagani H.V., Kulkarni P.M., Karunakaran K.P., Rana D., Tewari A.,Characterization of additive manufactured objects,Lecture Notes in Engineering and Computer Science,2,,2014,1109.

Zine P.U., Kulkarni M.S., Chawla R., Ray A.K.,A framework for value co-creation through customization and personalization in the context of machine tool PSS,Procedia CIRP,16,,2014,32.

Zope M., Chowdhury A., Gupta A.,Modeling and control for a monopropellant-powered actuator,IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM,,,2014,239.

A. Jain, Y.-J. Yu, and A. J. H. McGaughey, “Phonon transport in periodic silicon nanoporous films with feature sizes greater than 100 nm.” Physical Review B 87, 195301 (2013).

Aakella P.S., Saravanan S., Joshi S.S., Solanki C.S.,Pre-metallization processes for c-Si solar cells,Solar Energy,97,,2013,388.

Aggarwal V., Gada V.H., Sharma A.,Parallelization methodology and performance study for level-set-method- based simulation of a 3-D transient two-phase flow,Numerical Heat Transfer, Part B: Fundamentals,63,4,2013,327.

Agrawal P., Gandhi P.S., Neild A.,The mechanics of microparticle collection in an open fluid volume undergoing low frequency horizontal vibration,Journal of Applied Physics,114,11,2013,114904.

Agrawal S., Joshi S.S.,Analytical modelling of residual stresses in orthogonal machining of AISI4340 steel,Journal of Manufacturing Processes,15,1,2013,56.

Ambekar A., Bhangale R., Dukale A., Chowdhury A., Challa S., Radhakrishna D.,Spray combustion of isopropyl nitrate and dibutyl sebacate blends,Proceedings of the 9th Asia-Pacific Conference on Combustion, ASPACC 2013,,,2013,.

Ambekar A., Bhangale R., Dukale A., Gandhi R., Chowdhury A., Radhakrishna D., Challa S.,Ignition and combustion of nitromethane sprays,49th AIAA/ASME/SAE/ASEE Joint Propulsion Conference,,,2013,.

Ambekar A., Mallick L., Gandhi R., Chowdhury A., Radhakrishna D., Challa S.,Burn rate characterization of iso-propyl nitrate blends: Part I,49th AIAA/ASME/SAE/ASEE Joint Propulsion Conference,,,2013,.

Ambekar A., Mallick L., Gandhi R., Chowdhury A., Radhakrishna D., Challa S.,Burn rate characterization of iso-propyl nitrate blends: Part II,49th AIAA/ASME/SAE/ASEE Joint Propulsion Conference,,,2013,.

Asjad M., Kulkarni M.S., Gandhi O.P.,A life cycle cost based approach of O&M support for mechanical systems,International Journal of Systems Assurance Engineering and Management,4,2,2013,159.

Asjad M., Mohite S., Kulkarni M.S., Gandhi O.P.,Opportunistic actions for subassemblies of a reciprocating compressor: An LCC based approach,International Journal of Performability Engineering,9,3,2013,273.

Ba S., Jain N., Joseph V.R., Singh R.,Integrating analytical models with finite-element models: An application in micromachining,Journal of Quality Technology,45,2,2013,200.

Bajpai V., Kushwaha A.K., Singh R.K.,Burr formation and surface quality in high speed micromilling of titanium alloy (TI6AI4V),ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference, MSEC 2013,2,,2013,MSEC2013-1216.

Bajpai V., Singh R.,Brittle damage and interlaminar decohesion in orthogonal micromachining of pyrolytic carbon,International Journal of Machine Tools and Manufacture,64,,2013,20.

Balasubramanian S., Orlicz G.C., Prestridge K.P.,Experimental study of initial condition dependence on turbulent mixing in shock-accelerated Richtmyer-Meshkov fluid layers,Journal of Turbulence,14,3,2013,170.

Beeranur R., Waghmare K.K., Singh R.K.,Characterization of vacuum brazing of TI6AL4V and alumina with CU-AG brazing alloy via substrate-induced reactive mechanism,ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference, MSEC 2013,1,,2013,MSEC2013-1218.

Bhapkar U.S., Srivastava A., Agrawal A.,Acoustic and heat transfer aspects of an inclined impinging synthetic jet,International Journal of Thermal Sciences,74,C,2013,145.

Bhargava M., Tewari A., Mishra S.,Strain path diagram simulation of AA 5182 Aluminum alloy,Procedia Engineering,64,,2013,1252.

Bhattacharya A., Balazs A.C.,Stiffness-modulated motion of soft microscopic particles over active adhesive cilia,Soft Matter,9,15,2013,3945.

Bhattacharya, Anirban; Karagadde, Shyamprasad; Dutta, Pradip;,An equivalent undercooling model to account for flow effect on binary alloy dendrite growth rate,International Communications in Heat and Mass Transfer,47,,2013,15-19.

Bhushan A., Inamdar M.M., Pawaskar D.N.,Dynamic analysis of a double-sided actuated MEMS oscillator using second-order averaging,Lecture Notes in Engineering and Computer Science,3 LNECS,,2013,1640.

Bishnoi, L.R., Vedula, R.P.,Prediction of air leakage and aerosol transport through concrete cracks with a fractal based crack morphology model,Nuclear Engineering and Design,265,,2013,393.

Biswas S., Agrawal A.,Noise reduction in a large enclosure using single, dual and ensconced helmholtz resonators,Current Science,104,12,2013,1681.

Bobade R.S., Gandhi P.S., Bhagat N.A., Chen C.,Cancellation of physiological hand tremors using compliant robotic assist,ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE),0.125,,2013,.

Brijesh P., Chowdhury A., Sreedhara S.,Effect of treated exhaust gas recirculation on low temperature combustion in CI engines,Proceedings of the 9th Asia-Pacific Conference on Combustion, ASPACC 2013,,,2013,.

Brijesh P., Chowdhury A., Sreedhara S.,Effect of ultra-cooled EGR and retarded injection timing on low temperature combustion in CI engines,SAE Technical Papers,2,,2013,.

Brijesh, P; Chowdhury, A; Sreedhara, S;,Effect of Ultra-Cooled EGR and Retarded Injection Timing on Low Temperature Combustion in CI Engines,SAE international, 2013-01-0321,2013,,2013,.

Brijesh, P; Sreedhara, S;,Exhaust emissions and its control methods in compression ignition engines: a review,International Journal of Automotive Technology,14,2,2013,195-206.

Burattini P., Agrawal A.,Wake interaction between two side-by-side square cylinders in channel flow,Computers and Fluids,77,,2013,134.

Coryell J., Savic V., Hector L., Mishra S.,Temperature effects on the deformation and fracture of a quenched-and-partitioned steel,SAE Technical Papers,2,,2013,.

Deepak Marla, Upendra V. Bhandarkar and Suhas S. Joshi,Modeling nanosecond pulsed laser ablation: A focus on temperature dependence of material properties,Manufacturing Letters,2,1,2013,13-16.

Deepak Marla, Upendra V. Bhandarkar and Suhas S. Joshi,Transient Analysis of Laser Ablation Process With Plasma Shielding: One-Dimensional Model Using Finite Volume Method,Journal of Micro and Nano-Manufacturing,1,1,2013,11007.

Deepak Marla, Vishal P. Barde and Suhas S. Joshi,Analytical model to predict temperature distribution and ablation depth in excimer laser micromachining,International Journal of Precision Engineering and Manufacturing,14,1,2013,29-36.

Dixit S., Inamdar M.M., Pawaskar D.N.,Effect of surfaces on thermoelastic damping of nano-resonators,Proceedings of SPIE - The International Society for Optical Engineering,8923,,2013,89231U.

Dongre G.G., Padwal P.S., Singh R.K., Joshi S.S.,Effect of silver coating on silicon ingot slicing by wire-EDM process,Transactions of the North American Manufacturing Research Institution of SME,41,,2013,75.

Dongre G.G., Vesivkar C., Singh R., Joshi S.S.,Modeling of silicon ingot slicing process by wire-electrical discharge machining,Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture,227,11,2013,1664.

Duryodhan V.S., Singh S.G., Agrawal A.,Boiling flow through diverging microchannel,Sadhana - Academy Proceedings in Engineering Sciences,38,6,2013,1067.

Duryodhan V.S., Singh S.G., Agrawal A.,Liquid flow through a diverging microchannel,Microfluidics and Nanofluidics,14,43132,2013,53.

Gada V.H., Datta D., Sharma A.,Analytical and numerical study for two-phase stratified-flow in a plane channel subjected to different thermal boundary conditions,International Journal of Thermal Sciences,71,,2013,88.

Gandhi P., Deshmukh S., Ramtekkar R., Bhole K., Baraki A.,"oN-AXIS" Linear focused spot scanning microstereolithography system: Optomechatronic design, analysis and development,Journal of Advanced Manufacturing Systems,12,1,2013,43.

Gandhi P.S., Bobade R.S., Chen C.,On the novel compliant Remote center mechanism,1st International and 16th National Conference on Machines and Mechanisms, iNaCoMM 2013,,,2013,576.

Gaonkar A.K., Kulkarni S.S.,Model order reduction for dynamic simulation of beams with forcing and geometric nonlinearities,Finite Elements in Analysis and Design,76,,2013,50.

Ghyar R., Subburaj K., Ravi B., Agarwal M.,Adaptive probabilistic approach for selecting tumour knee prosthesis,Computer Science and Information Systems,10,3,2013,1407.

Goecke S.-F., Syed A.A., Ebert-Spiegel M., De A.,Probing current, voltage and metal transfer characteristics in pulsed arc and in conventional and a novel low energy input short arc GMAW,Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society,31,4,2013,26s.

Gokhale O.S., Puranik B.P., Ghosh A.K.,Analytical study on degraded core quenching,Kerntechnik,78,3,2013,167.

Govindan P., Gupta A., Joshi S.S., Malshe A., Rajurkar K.P.,Single-spark analysis of removal phenomenon in magnetic field assisted dry EDM,Journal of Materials Processing Technology,213,7,2013,1048.

Guarendi A.N., Chandy A.J.,Magnetohydrodynamic simulations of hypersonic flow over a cylinder using axial- and transverse-oriented magnetic dipoles,The Scientific World Journal,2013,,2013,.

Guarendi A.N., Chandy A.J.,Nonoscillatory central schemes for hyperbolic systems of conservation laws in three-space dimensions,The Scientific World Journal,2013,,2013,.

Gudibande N.N., Iyer K.N.,Modified enthalpy method for the simulation of melting and solidification,Sadhana - Academy Proceedings in Engineering Sciences,38,6,2013,1259.

Guha A., Lawrence G.A.,Estuary classification revisited,Journal of Physical Oceanography,43,8,2013,1566.

Guha A., Rahmani M., Lawrence G.A.,Evolution of a barotropic shear layer into elliptical vortices,Physical Review E - Statistical, Nonlinear, and Soft Matter Physics,87,1,2013,.

Gupta S., Soni G., Singh R.,Micro-macro approach for predicting localized stress distribution in composites,ICCM International Conferences on Composite Materials,2013-July,,2013,8219.

Hindasageri, V., Vedula, R.P., Prabhu, S.V.,Thermocouple error correction for measuring the flame temperature with determination of emissivity and heat transfer coefficient,Review of Scientific Instruments,84,2,2013,.

Honkalaskar, V.H., Bhandarkar, U.V., Sohoni, M.,Development of a fuel efficient cookstove through a participatory bottom-up approach,Energy, Sustainability and Society,3,1,2013,.

Jacques, S.L., Ramamoorthy, S., Petrie, T.C., Nguyen-Huynh, A., Nuttall, A.L.,A concise algorithm for detection of vibration from Fourier domain OCT,Progress in Biomedical Optics and Imaging - Proceedings of SPIE,8565,,2013,.

Jagan Reddy G., Wanhill R.J.H., Gokhale A.A.,Mechanical working of aluminum-lithium alloys,Aluminum-Lithium Alloys: Processing, Properties, and Applications,,,2013,187.

Jain, V., Bhandarkar, U.V., Joshi, S.C., Krishnagopal, S.,Note: Matching index technique for avoiding higher order mode resonance in accelerators: INDUS-2 accelerator as a case study,Review of Scientific Instruments,84,8,2013,.

Joseph S., Tewari A., Kumar S.,The fracture characteristics of a near eutectic Al-Si based alloy under compression,Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science,44,5,2013,2358.

Joshi K., Ganesh V., Chowdhury A.,Spray characterization and performance optimization of a diesel engine fuelled by Karanja straight vegetable oil,Proceedings of the 9th Asia-Pacific Conference on Combustion, ASPACC 2013,,,2013,.

Joshi S., Tewari A., Joshi S.,Influence of preheating on chip segmentation and microstructure in orthogonal machining of Ti6Al4V,Journal of Manufacturing Science and Engineering, Transactions of the ASME,135,6,2013,61017.

Kalapurakal D., Chandy A.J.,Accurate and efficient numerical simulations of magnetohydrodynamic (MHD) mixed convection at high hartmann numbers,Numerical Heat Transfer; Part A: Applications,64,7,2013,527.

Kharabe S.M., Ukhande M.R., Mane R.S., Date P.P., Apte P.P.,An evaluation of crankshaft bending rigidity using finite element analysis,SAE Technical Papers,1,,2013,.

Kiran D.V., Alam S.A., De A.,Development of process maps in two-wire tandem submerged arc welding process of HSLA steel,Journal of Materials Engineering and Performance,22,4,2013,988.

Kuksenok O., Dayal P., Bhattacharya A., Yashin V.V., Deb D., Chen I.C., Van Vliet K.J., Balazs A.C.,Chemo-responsive, self-oscillating gels that undergo biomimetic communication,Chemical Society Reviews,42,17,2013,7257.

Kumar P., More S., Singh R., Joshi S.S.,Experimental characterization of plane and conformal hydrodynamic polishing of machined single crystal sapphire,Manufacturing Letters,1,43192,2013,70.

Kurode S., Spurgeon S.K., Bandyopadhyay B., Gandhi P.S.,Sliding mode control for slosh-free motion using a nonlinear sliding surface,IEEE/ASME Transactions on Mechatronics,18,2,2013,714.

Limaye, M.D., Gulati, P., Vedula, R.P., Prabhu, S.V.,Effect of the profile of a convergent nozzle on heat transfer distribution of a flat plate impinged by an under-expanded jet,Experimental Thermal and Fluid Science,45,,2013,75.

Limaye, M.D., Vedula, R.P., Prabhu, S.V.,Comparison of heat transfer distributions on a flat plate impinged by under-expanded jets from a convergent nozzle and a circular orifice,Heat and Mass Transfer/Waerme- und Stoffuebertragung,49,3,2013,309.

Lin N., Miao J., Dixit P.,Void formation over limiting current density and impurity analysis of TSV fabricated by constant-current pulse-reverse modulation,Microelectronics Reliability,53,12,2013,1943.

Madhusudhan Reddy G., Gokhale A.A.,Welding aspects of aluminum-lithium alloys,Aluminum-Lithium Alloys: Processing, Properties, and Applications,,,2013,259.

Manik D.N.,Statistical energy analysis (SEA) applications in vibration and noise,20th International Congress on Sound and Vibration 2013, ICSV 2013,4,,2013,3639.

Manik, D.N.,Statistical energy analysis (SEA) applications in vibration and noise,20th International Congress on Sound and Vibration 2013, ICSV 2013,4,,2013,3639.

Marla D., Barde V., Joshi S.S.,Analytical model to predict temperature distribution and ablation depth in excimer laser micromachining,International Journal of Precision Engineering and Manufacturing,14,1,2013,29.

Marla D., Bhandarkar U.V., Joshi S.S.,Modeling nanosecond pulsed laser ablation: A focus on temperature dependence of material properties,Manufacturing Letters,2,1,2013,13.

Marla, D., Bhandarkar, U.V., Joshi, S.S.,Modeling nanosecond pulsed laser ablation: A focus on temperature dependence of material properties,Manufacturing Letters,2,1,2013,13.

Mehta M., Chatterjee K., De A.,Monitoring torque and traverse force in friction stir welding from input electrical signatures of driving motors,Science and Technology of Welding and Joining,18,3,2013,191.

Mehta M., De A., DebRoy T.,Probing load bearing capacity of circular and non-circular tool pins in friction stir welding,ASM Proceedings of the International Conference: Trends in Welding Research,,,2013,563.

Mehta, J.R., Rane, M.V.,Liquid desiccant based solar air conditioning system with novel evacuated lube collector as regenerator,Procedia Engineering,51,,2013,688.

Mishra S.K., Tatiparti S.S.V., Tiwari S.M., Raghavan R.S., Carsley J.E., Li J.,Annealing response of AA5182 deformed in plane strain and equibiaxial strain paths,Philosophical Magazine,93,20,2013,2613.

Muthu, N., Falzon, B.G., Maiti, S.K., Khoddam, S.,Modelling crack propagation in particle-reinforced composites using the element-free galerkin method,ICCM International Conferences on Composite Materials,2013-July,,2013,1020.

Muthu, N., Maiti, S.K., Falzon, B.G., Guiamatsia, I.,A comparison of stress intensity factors obtained through crack closure integral and other approaches using eXtended element-free Galerkin method,Computational Mechanics,52,3,2013,587.

Nawaz I. Motiwala, Irshad Ahmed Khan, Nitesh P. Yelve, Balkrishna E. Narkhede, and Rajkumar S. Pant, Conceptual approach for design, fabrication and testing of indoor remotely controlled airship, Journal of Advanced Materials Research, 690–693, , 2013, DOI:10.4028/www.scientific.net/AMR.690-693.3390, 3390–3395

Orlicz G.C., Balasubramanian S., Prestridge K.P.,Incident shock Mach number effects on Richtmyer-Meshkov mixing in a heavy gas layer,Physics of Fluids,25,11,2013,114101.

P. Tandaiya, R. Narasimhan, U. Ramamurty,On the mechanism and the length scales involved in the ductile fracture of a bulk metallic glass,Acta Materialia,61,5,2013,10.1016/j.actamat.2012.11.033,1558

Perala S., Shaikh T., Zope M., Gautam R., Gupta A., Chowdhury A.,Catalytic combustion of hydrogen peroxide and methanol mixtures,Proceedings of the 9th Asia-Pacific Conference on Combustion, ASPACC 2013,,,2013,.

Petrie, T.C., Ramamoorthy, S., Jacques, S.L., Nuttall, A.L.,Increasing PS-SDOCT SNR using correlated coherent averaging,Progress in Biomedical Optics and Imaging - Proceedings of SPIE,8565,,2013,.

Prasad K., Agrawal A., Sharma A.,Poiseuille flow across an eccentrically confined stationary/rotating cylinder,Ocean Engineering,73,,2013,41.

Prasad K.S., Prasad N.E., Gokhale A.A.,Microstructure and Precipitate Characteristics of Aluminum-Lithium Alloys,Aluminum-Lithium Alloys: Processing, Properties, and Applications,,,2013,99.

Prasad S.V., Jonnalagadda K.N.,Mechanical behavior of SS 304LN at high strain rates in compression,Conference Proceedings of the Society for Experimental Mechanics Series,1,,2013,101.

Prestridge K., Orlicz G., Balasubramanian S., Balakumar B.J.,Experiments of the Richtmyer-Meshkov instability,Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences,371,2003,2013,20120165.

Rajaraman S., Jonnalagadda K.N., Ghosh P.,Indentation and dynamic compression experiments on microcrystalline and nanocrystalline nickel,Conference Proceedings of the Society for Experimental Mechanics Series,1,,2013,157.

Rajkumar S., Choudhari R.S., Chowdhury A., Namboothiri I.N.N.,Synthesis and pyrolysis studies of bis(nitratomethyl)-1,3-bishomocubane - A high-energy high-density liquid,Thermochimica Acta,563,,2013,38.

Ramamoorthy, S., Wilson, T.M., Wu, T., Nuttall, A.L.,Non-uniform distribution of outer hair cell transmembrane potential induced by extracellular electric field,Biophysical Journal,105,12,2013,2666.

Ramamoorthy, S., Zhang, Y., Petrie, T., Chen, F., Subhash, H.M., Choudhury, N., Wang, R., Jacques, S.L. and Nuttall, A.L.,Measurement of in vivo basal-turn vibrations of the organ of Corti using phase-sensitive Fourier domain optical coherence tomography,Progress in Biomedical Optics and Imaging - Proceedings of SPIE,8565,,2013,.

Rane M V, Joshi S M, Bhave D P, “Solar Collector for Agro Produce Drying”, Knowledge Forum’s VIII Annual Conference on Emerging Technologies and Development, Oct 25 to 27, 2013, Mumbai, INDIA.

Rane M V, Mehta J R “Liquid Desiccant based Solar Air Conditioning System with novel Evacuated Tube Collector”, Journal of the Procedia Engineering, Vol 51, 2013, pp 688-693.

Rane M V, Sarangi R K “Experimental Investigation for Startup and Maximum Heat Load of Closed Loop Pulsating Heat Pipe”, Journal of the Procedia Engineering, Vol 51, 2013, pp 683-687.

Rao A.G., Ravi K.R., Ramakrishnarao B., Deshmukh V.P., Sharma A., Prabhu N., Kashyap B.P.,Recrystallization phenomena during friction stir processing of hypereutectic aluminum-silicon alloy,Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science,44,3,2013,1519.

Raykar, N.R., Maiti, S.K., Singh Raman, R.K., Aryan, S.,Study of hydrogen concentration dependent growth of external annular crack in round tensile specimen using cohesive zone model,Engineering Fracture Mechanics,106,,2013,49.

Raykar, N.R., Maiti, S.K., Singh Raman, R.K., Aryan, S.,Study of hydrogen concentration dependent growth of external annular crack in round tensile specimen using cohesive zone model,Journal of Banking and Finance,37,8,2013,49.

Saha S.K., Dutta P.,Role of melt convection on optimization of PCM-based heat sink under cyclic heat load,Heat Transfer Engineering,34,43445,2013,950.

Sahai A., Prabhu S.V., Chowdhury A.,Oxy-coal combustion in a fixed bed reactor,Proceedings of the 9th Asia-Pacific Conference on Combustion, ASPACC 2013,,,2013,.

Saini S.K., Mohanan S., Ambekar A., Chaudhari M., Chowdhury A., Srivastava A.,Optical diagnostic of temperature distribution in a monopropellant flame using Mach Zehnder interferometer,Proceedings of the 9th Asia-Pacific Conference on Combustion, ASPACC 2013,,,2013,.

Sankar M., Baligidad R.G., Gokhale A.A.,Effect of oxygen on microstructure and mechanical properties of niobium,Materials Science and Engineering A,569,,2013,132.

Sankar M., Baligidad R.G., Satyanarayana D.V.V., Gokhale A.A.,Effect of internal oxidation on the microstructure and mechanical properties of C-103 alloy,Materials Science and Engineering A,574,,2013,104.

Sapre P., Mall A., Joshi S.S.,Analysis of electrolytic flow effects in micro-electrochemical grinding,Journal of Manufacturing Science and Engineering, Transactions of the ASME,135,1,2013,11012.

Sarangi, R.K., Rane, M.V.,Experimental investigations for start up and maximum heat load of closed loop pulsating heat pipe,Procedia Engineering,51,,2013,683.

Sarangi, R.K., Rane, M.V.,Numerical modeling of a pulsating heat pipe with heating from the top,Heat Transfer Research,44,6,2013,535.

Sardeshpande V., Gaitonde U.N., Banerjee R.,Methodology for indirect determination of air and flue-gas leakage in a typical glass furnace in India,Glass Technology: European Journal of Glass Science and Technology Part A,54,6,2013,233.

Satpal S., Khandare Y., Guha A., Baneijee S.,Structural Health Monitoring (SHM) of cantilever beam using support vector machine,Journal of Structural Engineering (India),40,1,2013,58.

Satpal S.B., Khandare Y., Guha A., Banerjee S.,Structural health monitoring of a cantilever beam using support vector machine,International Journal of Advanced Structural Engineering,5,1,2013,.

Sethi A.R., Patel H.S., Srivastava A.,Quantitative imaging of inhomogeneities in turbid medium using diffuse optical tomography: A genetic algorithm based approach,Progress in Biomedical Optics and Imaging - Proceedings of SPIE,8578,,2013,85781A.

Shah DS, Ghyar R, Ravi B, Shetty V, 3D morphological study of the Indian arthritic knee: comparison with other ethnic groups, Open Journal of Rheumatology and Autoimmune Diseases, 3, 4, 2013, 10.4236/ojra.2013.34041, 263-269

Shinde H., Mahajan P., Singh R., Narasimhan K.,Three dimensional finite element analysis of staggered backward flow forming process,ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference, MSEC 2013,1,,2013,MSEC2013-1219.

Shinde V.D., Joshi D., Ravi B., Narasimhan K.,Optimization of mold yield in multicavity sand castings,Journal of Materials Engineering and Performance,22,6,2013,1574.

Shinde V.D., Ravi B., Narasimhan K.,Effect of casting orientation, thickness and composition on solidification structure and properties of ductile iron castings,Proceedings of the 37th International MATADOR 2012 Conference,,,2013,29.

Shinde V.D., Ravi B., Narasimhan K.,Effect of orientation, thickness, and composition on properties of ductile iron castings,Materials and Manufacturing Processes,28,5,2013,539.

Shrivastava M., Agrawal A., Sharma A.,A novel level set-based immersed-boundary method for CFD simulation of moving-boundary problems,Numerical Heat Transfer, Part B: Fundamentals,63,4,2013,304.

Singh G., Teli M., Samanta A., Singh R.,Finite element modeling of laser-assisted machining of AISI D2 tool steel,Materials and Manufacturing Processes,28,4,2013,443.

Singh V., Gokhale A.A.,Melting and casting of aluminum-lithium alloys,Aluminum-Lithium Alloys: Processing, Properties, and Applications,,,2013,167.

Soni G., Singh R., Mitra M.,Buckling behavior of composite laminates (with and without cutouts) subjected to nonuniform in-plane loads,International Journal of Structural Stability and Dynamics,13,8,2013,1350044.

Srivastava A.,Development and application of color schlieren technique for investigation of three-dimensional concentration field,Journal of Crystal Growth,383,,2013,131.

Suryakumar S., Karunakaran K.P., Chandrasekhar U., Somashekara M.A.,A study of the mechanical properties of objects built through weld-deposition,Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture,227,8,2013,1138.

Sutaria M., Ravi B.,Gradient vector method for computing feed-paths and hot-spots during casting solidification,Proceedings of the 37th International MATADOR 2012 Conference,,,2013,25.

Syed A.A., Pittner A., Rethmeier M., De A.,Modeling of gas metal arc welding process using an analytically determined volumetric heat source,ISIJ International,53,4,2013,698.

Tailor P.B., Agrawal A., Joshi S.S.,Evolution of electrochemical finishing processes through cross innovations and modeling,International Journal of Machine Tools and Manufacture,66,,2013,15.

Tambe P.P., Kulkarni M.S.,An opportunistic maintenance decision of a multi-component system considering the effect of failures on quality,Lecture Notes in Engineering and Computer Science,1 LNECS,,2013,693.

Tambe P.P., Mohite S., Kulkarni M.S.,Optimisation of opportunistic maintenance of a multi-component system considering the effect of failures on quality and production schedule: A case study,International Journal of Advanced Manufacturing Technology,69,43317,2013,1743.

Tandaiya, P., Narasimhan, R., Ramamurty, U.,On the mechanism and the length scales involved in the ductile fracture of a bulk metallic glass,Acta Materialia,61,5,2013,1558.

Tewari A., Vijayalakshmi S., Tiwari S., Biswas P., Kim S., Mishra R.K., Kubic R., Sachdev A.K.,Influence of microstructure on uniaxial strain localization in AA5754 aluminum sheets produced by various processing routes,Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science,44,5,2013,2382.

Thakar P.S., Bandyopadhyay B., Gandhi P.S.,Sliding mode control for an underactuated slosh-container system using non-linear model,International Journal of Advanced Mechatronic Systems,5,5,2013,335.

Tripathi A., Bhattacharya A., Balazs A.C.,Size selectivity in artificial cilia-particle interactions: Mimicking the behavior of suspension feeders,Langmuir,29,14,2013,4616.

Tripathi A., Samajdar I., Tewari A., Kanjarla A.K., Srinivasan N., Reddy G.M., Nie J.F.,Texture and microstructure developments during friction stir processing of magnesium alloy AZ31,Materials Science and Technology Conference and Exhibition 2013, MS and T 2013,3,,2013,1516.

Tripathi S., Prabhakar A., Kumar N., Singh S.G., Agrawal A.,Blood plasma separation in elevated dimension T-shaped microchannel,Biomedical Microdevices,15,3,2013,415.

Trivedi R.R., Joglekar M.M., Shimpi R.P., Pawaskar D.N.,Shape optimization of electrostatically driven microcantilevers using simulated annealing to enhance static travel range,Proceedings of SPIE - The International Society for Optical Engineering,8923,,2013,89234W.

Varade V., Agrawal A., Pradeep A.M.,Behaviour of rarefied gas flow near the junction of a suddenly expanding tube,Journal of Fluid Mechanics,739,,2013,363.

Wanhill R.J.H., Prasad N.E., Gokhale A.A.,Aluminum-Lithium Alloys: Processing, Properties, and Applications,Aluminum-Lithium Alloys: Processing, Properties, and Applications,,,2013,1.

Watvisave D.S., Bhandarkar U.V., Puranik B.P.,Investigation of wall effects on flow characteristics of a high knudsen number nozzle,Nanoscale and Microscale Thermophysical Engineering,17,2,2013,124.

Watvisave, D.S., Bhandarkar, U.V., Puranik, B.P.,Investigation of wall effects on flow characteristics of a high knudsen number nozzle,Nanoscale and Microscale Thermophysical Engineering,17,2,2013,124.

Weismiller M.R., Wang S.Q., Chowdhury A., Thynell S.T., Yetter R.A.,Confined rapid thermolysis studies of ammonia borane,Thermochimica Acta,551,,2013,110.

Zachariah Z., Tatiparti S.S.V., Mishra S.K., Ramakrishnan N., Ramamurty U.,Tension-compression asymmetry in an extruded Mg alloy AM30: Temperature and strain rate effects,Materials Science and Engineering A,572,,2013,8.

A. J. H. McGaughey and A. Jain, “ Nanostructure thermal conductivity prediction by Monte Carlo sampling of phonon free paths.” Applied Physics Letters 100, 061911 (2012).

Agrawal A., Duryodhan V.S., Singh S.G.,Pressure drop measurements with boiling in diverging microchannel,Frontiers in Heat and Mass Transfer,3,1,2012,.

Alankar A., Field D.P., Zbib H.M.,Explicit incorporation of cross-slip in a dislocation density-based crystal plasticity model,Philosophical Magazine,92,24,2012,3084.

Alankar A., Field D.P.,Modeling of deformation microstructure - Strain hardening and crystallographic reorientation of crystallites in a columnar polycrystal,Materials Science Forum,702-703,,2012,196.

Alankar A., Mastorakos I.N., Field D.P., Zbib H.M.,Determination of dislocation interaction strengths using discrete dislocation dynamics of curved dislocations,Journal of Engineering Materials and Technology, Transactions of the ASME,134,2,2012,21018.

Ambekar A., Chowdhury A.,Combustion of blended monopropellants,48th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit 2012,,,2012,.

Ardhapurkar P.-M., Sridharan A., Atrey M.-D.,Investigations on two-phase heat exchanger for mixed refrigerant JouleThomson cryocooler,AIP Conference Proceedings,1434,57,2012,706.

Arora A., Mehta M., De A., Debroy T.,Erratum: Load bearing capacity of tool pin during friction stir welding (International Journal of Advanced Manufacturing Technology DOI 10.1007/s00170-011-3759-7),International Journal of Advanced Manufacturing Technology,61,43443,2012,921.

Arora A., Mehta M., De A., Debroy T.,Load bearing capacity of tool pin during friction stir welding,International Journal of Advanced Manufacturing Technology,61,43443,2012,911.

Bag S., Kiran D.V., Syed A.A., De A.,Efficient estimation of volumetric heat source in fusion welding process simulation,Welding in the World,56,43445,2012,88.

Balakumar B.J., Orlicz G.C., Ristorcelli J.R., Balasubramanian S., Prestridge K.P., Tomkins C.D.,Turbulent mixing in a Richtmyer-Meshkov fluid layer after reshock: Velocity and density statistics,Journal of Fluid Mechanics,696,,2012,67.

Balasubramanian S., Orlicz G.C., Prestridge K.P., Balakumar B.J.,Experimental study of initial condition dependence on Richtmyer-Meshkov instability in the presence of reshock,Physics of Fluids,24,3,2012,34103.

Bhandakkar T.K., Johnson H.T.,Diffusion induced stresses in buckling battery electrodes,Journal of the Mechanics and Physics of Solids,60,6,2012,1103.

Bhandari R., Patil S., Singh R.K.,Surface prediction and control algorithms for anti-lock brake system,Transportation Research Part C: Emerging Technologies,21,1,2012,181.

Bhardwaj, Rajneesh; Mittal, Rajat;,Benchmarking a coupled immersed-boundary-finite-element solver for large-scale flow-induced deformation,AIAA journal,50,7,2012,1638-1642.

Bhardwaj, Rajneesh; Ziegler, Kimberly; Nguyen, Thao D;,Blast Wave Reflections on the Human Eye,Investigative Ophthalmology & Visual Science,53,14,2012,4960-4960.

Bhattacharya A., Buxton G.A., Usta O.B., Balazs A.C.,Propulsion and trapping of microparticles by active cilia arrays,Langmuir,28,6,2012,3217.

Chaudhari M.B., Puranik B., Agrawal A.,Heat Transfer Characteristics of a Heat Sink in Presence of a Synthetic Jet,IEEE Transactions on Components, Packaging and Manufacturing Technology,2,3,2012,457.

Cohen M.L., Kulkarni S.S., Achenbach J.D.,Probabilistic approach to growth and detection of a truncated distribution of initial crack lengths based on Paris' law,Structural Health Monitoring,11,2,2012,225.

Coryell J., Campbell J., Savic V., Bradley J., Mishra S., Tiwari S., Hector Jr. L.,Tensile deformation of quenched and partitioned steel - A third generation high strength steel,TMS Annual Meeting,2,,2012,555.

Dabade U., Joshi S.,Machining of Al/SiCp metal matrix composites at low temperature heating prior to machining,Applied Mechanics and Materials,197,,2012,428.

Date A.W.,Heat and mass transfer analysis of a clay-pot refrigerator,International Journal of Heat and Mass Transfer,55,15-16,2012,3977.

Dayal P., Kuksenok O., Bhattacharya A., Balazs A.C.,Chemically-mediated communication in self-oscillating, biomimetic cilia,Journal of Materials Chemistry,22,1,2012,241.

Debroy T., De A., Bhadeshia H.K.D.H., Manvatkar V.D., Arora A.,Tool durability maps for friction stir welding of an aluminium alloy,Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences,468,2147,2012,3552.

Dhamija L., Anilkumar G., Guha A., Singh R.K.,Kinematic analysis and design optimisation of a surgical rod cutter for shearing of Ti6Al4V rods,International Journal of Materials and Product Technology,43,43191,2012,22.

Dileesh P.V., Kulkarni S.S., Pawaskar D.N.,Static and dynamic analysis of electrostatically actuated microcantilevers using the spectral element method,ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2012,2,,2012,399.

Dixit P., Vähänen S., Salonen J., Monnoyer P.,Effect of process gases on fabricating tapered through-silicon vias by continuous SF6/O2/Ar plasma etching,ECS Journal of Solid State Science and Technology,1,3,2012,P107.

Dixit P., Vehmas T., Vähänen S., Monnoyer P., Henttinen K.,Fabrication and electrical characterization of high aspect ratio poly-silicon filled through-silicon vias,Journal of Micromechanics and Microengineering,22,5,2012,.

Dongari N., Agrawal A.,Erratum: Modeling of Navier - Stokes equations for high Knudsen number gas flows (International Journal of Heat and Mass Transfer (2012) 55 (4352-4358),International Journal of Heat and Mass Transfer,55,21-22,2012,6291.

Dongari N., Agrawal A.,Modeling of Navier-Stokes equations for high Knudsen number gas flows,International Journal of Heat and Mass Transfer,55,15-16,2012,4352.

Dongre G., Singh R., Joshi S.S.,Response surface analysis of slicing of silicon ingots with focus on photovoltaic application,Machining Science and Technology,16,4,2012,624.

Epstein I.R., Vanag V.K., Balazs A.C., Kuksenok O., Dayal P., Bhattacharya A.,Chemical oscillators in structured media,Accounts of Chemical Research,45,12,2012,2160.

Gada V.H., Sharma A.,Analytical and level-set method based numerical study on oil-water smooth/wavy stratified-flow in an inclined plane-channel,International Journal of Multiphase Flow,38,1,2012,99.

Gandhi P., Badkas A.,On the nonlinear dynamics of a vibro-impacting cantilever with end mass,ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE),12,,2012,253.

Gandhi P., Bhole K., Chaudhari N.,Fabrication of textured 3D microstructures using 'Bulk lithography',ASME 2012 International Manufacturing Science and Engineering Conference Collocated with the 40th North American Manufacturing Research Conference and in Participation with the Int. Conf., MSEC 2012,,,2012,959.

Gandhi P., Kamble S., Bhole K.,Novel fabrication and characterization of diaphragm micromirror using 'bulk lithography',ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE),9,PARTS A AND B,2012,549.

Gandhi P., Patil O.,On the dynamics of an inverted flexible pendulum with tip mass on a cart,ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE),4,PARTS A AND B,2012,415.

Gandhi P., Sonawale K., Soni V., Patanwala N., Bansode A.,Design for assembly guidelines for high-performance compliant mechanisms,Journal of Mechanical Design, Transactions of the ASME,134,12,2012,121006.

Gorugantu R., Gandhi P.,Control design based on novel parabolic sliding surfaces,Proceedings of IEEE International Workshop on Variable Structure Systems,,,2012,410.

Govindan P., Joshi S.S.,Analysis of micro-cracks on machined surfaces in dry electrical discharge machining,Journal of Manufacturing Processes,14,3,2012,277.

Hatwar R., Ambad S., Kumbhalkar M.D., Singh T., Gandhi P.S., Atrey M.D., Joshi P., Joseph S., Phatak G.,Development of a miniature Joule-Thomson refrigerator using LTCC (Low Temperature Co-fired Ceramic) technique,Proceedings - ISPTS-1, 1st International Symposium on Physics and Technology of Sensors,,,2012,145.

Hatwar R., Gandhi P.S., Atre M.D., Patel C., Giramkar V., Joseph S., Phatak G.J.,Analysis, fabrication and testing of ultra high pressure microchannels using LTCC technology,Proceedings - ISPTS-1, 1st International Symposium on Physics and Technology of Sensors,,,2012,224.

Jagad P.I., Puranik B.P., Date A.W.,An iterative procedure for the evaluation of a conjugate condition in heat transfer problems,Numerical Heat Transfer; Part A: Applications,61,5,2012,353.

Jha J.S., Joshi S.S.,Numerical simulation of micro hot embossing of polymer substrate,International Journal of Precision Engineering and Manufacturing,13,12,2012,2215.

Joglekar M.M., Pawaskar D.N.,Shape optimization of electrostatically actuated microbeams for extending static and dynamic operating ranges,Structural and Multidisciplinary Optimization,46,6,2012,871.

Joshi M., More S., Singh R.K., Joshi S.S., Balasubramaniam R., Suri V.K.,Experimental characterization of hydrodynamic nanopolishing of flat steel plates,Precision Engineering,36,3,2012,424.

Joshi S.S.,Editorial,International Journal of Mechatronics and Manufacturing Systems,5,43256,2012,339.

Kalapurakal D., Chandy A.J.,Numerical simulations of mhd fluid flow and heat transfer in a lid-driven cavity at high hartmann numbers,Heat Transfer Research,43,5,2012,383.

Karade V., Ravi B., Agarwal M.,Extramedullary versus intramedullary tibial cutting guides in megaprosthetic total knee replacement,Journal of Orthopaedic Surgery and Research,7,1,2012,.

Karagadde, Shyamprasad; Bhattacharya, Anirban; Tomar, Gaurav; Dutta, Pradip;,A coupled VOF_IBM_enthalpy approach for modeling motion and growth of equiaxed dendrites in a solidifying melt,Journal of Computational Physics,231,10,2012,3987-4000.

Karagadde, Shyamprasad; Sundarraj, Suresh; Dutta, Pradip;,A model for growth and engulfment of gas microporosity during aluminum alloy solidification process,Computational Materials Science,65,,2012,383-394.

Karthik V., Visweswaran P., Bhushan A., Pawaskar D.N., Kasiviswanathan K.V., Jayakumar T., Raj B.,Finite element analysis of spherical indentation to study pile-up/sink-in phenomena in steels and experimental validation,International Journal of Mechanical Sciences,54,1,2012,74.

Kartik V., Sebastian A., Tuma T., Pantazi A., Pozidis H., Sahoo D.R.,High-bandwidth nanopositioner with magnetoresistance based position sensing,Mechatronics,22,3,2012,295.

Karunakaran K.P., Bernard A., Suryakumar S., Dembinski L., Taillandier G.,Rapid manufacturing of metallic objects,Rapid Prototyping Journal,18,4,2012,264.

Kim S., Su Y., Mihi A., Lee S., Liu Z., Bhandakkar T.K., Wu J., Geddes J.B., Johnson H.T., Zhang Y., Park J.-K., Braun P.V., Huang Y., Rogers J.A.,Imbricate scales as a design construct for microsystem technologies,Small,8,6,2012,901.

Kiran D.V., Basu B., De A.,Influence of process variables on weld bead quality in two wire tandem submerged arc welding of HSLA steel,Journal of Materials Processing Technology,212,10,2012,2041.

Klettner C., Balasubramanian S., Hunt J., Fernando H., Voropayev S., Eames I.,Draw-down and run-up of tsunami waves on sloping beaches,Proceedings of the Institution of Civil Engineers: Engineering and Computational Mechanics,165,2,2012,119.

Krishnan, S., Hernon, D., Hodes, M., Mullins, J., Lyons, A.M.,Design of complex structured monolithic heat sinks for enhanced air cooling,IEEE Transactions on Components, Packaging and Manufacturing Technology,2,2,2012,.

Krishnan, S., Karri, N.K., Gogna, P.K., Chase, J.R., Fleurial, J.-P., Hendricks, T.J.,Progress towards an optimization methodology for combustion-driven portable thermoelectric power generation systems,Journal of Electronic Materials,41,6,2012,.

Krishnan, S., Leith, S., Hendricks, T.,Enhanced gas-side heat transfer in rectangular micro-honeycombs,ASME 2012 6th International Conference on Energy Sustainability, ES 2012, Collocated with the ASME 2012 10th International Conference on Fuel Cell Science, Engineering and Technology,,PARTS A AND B,2012,.

Kumar L., Manjunath B.S., Patel R.J., Markandeya S.G., Agrawal R.G., Agrawal A., Kashyap Y., Sarkar P.S., Sinha A., Iyer K.N., Prabhu S.V.,Experimental investigations on melting of lead in a cuboid with constant heat flux boundary condition using thermal neutron radiography,International Journal of Thermal Sciences,61,,2012,15.

Kumar P.P., Khardekar A., Iyer K.N.,Experimental and numerical investigation on a two-phase natural circulation test facility,Heat Transfer Engineering,33,9,2012,775.

Kurode S., Trivedi P., Bandyopadhyay B., Gandhi P.S.,Second order sliding mode control for a class of underactuated systems,Proceedings of IEEE International Workshop on Variable Structure Systems,,,2012,458.

Lad B.K., Kulkarni M.S.,Optimal maintenance schedule decisions for machine tools considering the user's cost structure,International Journal of Production Research,50,20,2012,5859.

Lebensohn R.A., Holt R.A., Caro A., Alankar A., Tomé C.N.,Improved constitutive description of single crystal viscoplastic deformation by dislocation climb,Comptes Rendus - Mecanique,340,43224,2012,289.

Lukas, M.D., Ghezel-Ayagh, H., Sanderson, R., Krishnan, S.,Development of a microchannel high temperature recuperator for ultra-high efficiency fuel cell/turbine systems,ECS Transactions,42,1,2012,.

Ma Y., Bhattacharya A., Kuksenok O., Perchak D., Balazs A.C.,Modeling the transport of nanoparticle-filled binary fluids through micropores,Langmuir,28,31,2012,11410.

Mahulikar S.P., Gulhane N.P., Pradhan S.D., Hrisheekesh K., Prabhu S.V.,Pressure drop characteristics in continuum-based laminar compressible microconvective flow,Nanoscale and Microscale Thermophysical Engineering,16,3,2012,181.

Manvatkar V.D., Arora A., De A., DebRoy T.,Neural network models of peak temperature, torque, traverse force, bending stress and maximum shear stress during friction stir welding,Science and Technology of Welding and Joining,17,6,2012,460.

Mastud S., Garg M., Singh R., Samuel J., Joshi S.,Experimental characterization of vibration-assisted reverse micro Electrical Discharge Machining (EDM) for surface texturing,ASME 2012 International Manufacturing Science and Engineering Conference Collocated with the 40th North American Manufacturing Research Conference and in Participation with the Int. Conf., MSEC 2012,,,2012,439.

Mastud S., Singh R.K., Joshi S.S.,Analysis of fabrication of arrayed micro-rods on tungsten carbide using reverse micro-EDM,International Journal of Manufacturing Technology and Management,26,43191,2012,176.

Mastud S.A., Garg M., Singh R., Joshi S.S.,Recent developments in the reverse micro-electrical discharge machining in the fabrication of arrayed micro-features,Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science,226,2,2012,367.

Mehta R.N., Bapat S.L., Atrey M.D.,Characterization of sorptioncompressor for mixed refrigerant J-T cryocooler,AIP Conference Proceedings,1434,57,2012,1797.

Mehta S.-M., Desai K.-P., Naik H.-B., Atrey M.-D.,Onset behavior of standing wave thermoacoustic pressure wave generator,AIP Conference Proceedings,1434,57,2012,459.

Milind T.R., Date P.P.,Analytical and finite element modeling of strain generated in equal channel angular extrusion,International Journal of Mechanical Sciences,56,1,2012,26.

Mishra S.K., Tiwari S.M., Kumar A.M., Hector Jr. L.G.,Effect of strain and strain path on texture and twin development in austenitic steel with twinning-induced plasticity,Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science,43,5,2012,1598.

Mitra S., Saha S.K., Chakraborty S., Das S.,Study on boiling heat transfer of water-TiO 2 and water-MWCNT nanofluids based laminar jet impingement on heated steel surface,Applied Thermal Engineering,37,,2012,353.

Mittal R., Singh R.K., Joshi S.S.,Elastohydrodynamic lubrication modeling of hydrodynamic nanopolishing process,Journal of Manufacturing Science and Engineering, Transactions of the ASME,134,4,2012,41001.

Mote, R.G., Chu, H.-S., Bai, P., Li, E.-P.,Compact and efficient coupler to interface hybrid dielectric-loaded plasmonic waveguide with silicon photonic slab waveguide,Optics Communications,285,18,2012,3709.

Mukherjee S., Mishra S.K., Samajdar I., Pant P.,Local strain calculations using Electron Backscattered Diffraction (EBSD) measurements and digital image processing,Materials Science Forum,702-703,,2012,562.

Muthu, N., Maiti, S.K., Falzon, B.G., Guiamatsia, I.,Computation of stress intensity factors in functionally graded materials using partition-of-unity meshfree method,Aeronautical Journal,116,1186,2012,1263.

Naik, S.S., Maiti, S.K.,Solution for coupled vibrations of short and long circular shafts/beams with two arbitrarily oriented open cracks,Advances in Vibration Engineering,11,1,2012,27.

Pable M.J., Seshu P.,Design of 'road friendly' suspensions for quarter and half heavy goods vehicle models by using genetic algorithm and a multi-objective performance index,International Journal of Vehicle Systems Modelling and Testing,7,1,2012,26.

Pandey D., Kulkarni M.S., Vrat P.,A methodology for simultaneous optimisation of design parameters for the preventive maintenance and quality policy incorporating Taguchi loss function,International Journal of Production Research,50,7,2012,2030.

Pawade R.S., Joshi S.S.,Analysis of acoustic emission signals and surface integrity in the high-speed turning of Inconel 718,Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture,226,1,2012,3.

Phatak A.M., Pande S.S.,Optimum part orientation in Rapid Prototyping using genetic algorithm,Journal of Manufacturing Systems,31,4,2012,395.

Phatak A.M., Pande S.S.,Optimum part orientation in rapid prototyping using genetic algorithm,Transactions of the North American Manufacturing Research Institution of SME,40,,2012,708.

Rajkumar K., Aravindan S., Kulkarni M.S.,Wear and life characteristics of microwave-sintered copper-graphite composite,Journal of Materials Engineering and Performance,21,11,2012,2389.

Ramamoorthy, S., Nuttall, A.L.,Half-Octave Shift in Mammalian Hearing Is an Epiphenomenon of the Cochlear Amplifier,PLoS ONE,7,9,2012,.

Ramamoorthy, S., Nuttall, A.L.,Outer hair cell somatic electromotility in vivo and power transfer to the organ of corti,Biophysical Journal,102,3,2012,388.

Ravi B.,Casting solidification feed-path computation and industrial application,Transactions of the Indian Institute of Metals,65,6,2012,521.

Ravi Kumar N.V., Gokhale A.A.,Processing and stability of LM25/SiCP composite foams,Transactions of the Indian Institute of Metals,65,6,2012,753.

Ravi Kumar N.V., Gokhale H., Gokhale A.A.,Role of SiC P on processing and physical characteristics of Al-Si- Mg/SiC P composite foams,Materials Science Forum,710,,2012,383.

Raykar, N.R., Singh Raman, R.K., Maiti, S.K., Choudhary, L.,Investigation of hydrogen assisted cracking of a high strength steel using circumferentially notched tensile test,Materials Science and Engineering A,547,,2012,86.

Revankar S.T., Iyer K.N.,Selected papers from the 20th National and 9th ISHMT-ASME Heat and Mass Transfer Conference,Heat Transfer Engineering,33,9,2012,763.

S.M. Khot and Nitesh P. Yelve, Estimation of geometrical parameters of machine elements based on statistical methods to avoid resonance, Journal of Vibration and Control, 18, 2, 2012, DOI:10.1177/1077546311403793, 209–213

S.M. Khot, Nitesh P. Yelve, and Ramya Iyer, Extraction of system model from finite element model and simulation study of active vibration control, Journal of Advances in Vibration Engineering (currently known as Journal of Vibration Engineering & Technologies), 11, 3, 2012, , 259–280

S.M. Khot, Nitesh P. Yelve, Rajat Tomar, Sameer Desai, and Vittal S., Active vibration control of cantilever beam by using PID based output feedback controller, Journal of Vibration and Control, 18, 3, 2012, DOI:10.1177/1077546311406307, 366–372

Saha S.K., Dutta P.,Thermal management of electronics using PCM-based heat sink subjected to cyclic heat load,IEEE Transactions on Components, Packaging and Manufacturing Technology,2,3,2012,464.

Sahu S.N., Gokhale A.A., Mehra A.,Numerical prediction of effect of oxide characteristics on heterogeneous nucleation of bubbles in aluminium foaming,Transactions of the Indian Institute of Metals,65,6,2012,795.

Savitha U., Gokhale H., Reddy G.J., Venkataramana A., Gokhale A.A., Sundararaman M.,Effect of process parameters on porosity in laser deposited IN625 alloy,Transactions of the Indian Institute of Metals,65,6,2012,765.

Sewatkar C.M., Patel R., Sharma A., Agrawal A.,Flow around six in-line square cylinders,Journal of Fluid Mechanics,710,,2012,195.

Sewatkar C.M., Sharma A., Agrawal A.,On energy transfer in flow around a row of transversely oscillating square cylinders at low Reynolds number,Journal of Fluids and Structures,31,,2012,1.

Shakya P., Darpe A.K., Kulkarni M.S.,Use of Mahalanobis Taguchi system as data fusion approach for monitoring health of rolling element bearing,International Conference on Noise and Vibration Engineering 2012, ISMA 2012, including USD 2012: International Conference on Uncertainty in Structure Dynamics,5,,2012,3389.

Shinde V.D., Ravi B., Narasimhan K.,Solidification behaviour and mechanical properties of ductile iron castings with varying thickness,International Journal of Cast Metals Research,25,6,2012,364.

Shukla R., Lim L.-C., Gandhi P.,X-pod: A small footprint multi-legged piezoelectric single-crystal unimorph-based actuator concept,Smart Materials and Structures,21,6,2012,65015.

Smorygo O., Marukovich A., Mikutski V., Gokhale A.A., Reddy G.J., Kumar J.V.,High-porosity titanium foams by powder coated space holder compaction method,Materials Letters,83,,2012,17.

Sonawane H.A., Joshi S.S.,Analysis of machined surface quality in a single-pass of ball-end milling on Inconel 718,Journal of Manufacturing Processes,14,3,2012,257.

Sonawane S., Bhandarkar U., Puranik B., Sunil Kumar S.,Convective heat transfer characterization of aviation turbine fuel-metal oxide nanofluids,Journal of Thermophysics and Heat Transfer,26,4,2012,619.

Sonawane, S., Bhandarkar, U., Puranik, B., Sunil Kumar, S.,Convective heat transfer characterization of aviation turbine fuel-metal oxide nanofluids,Journal of Thermophysics and Heat Transfer,26,4,2012,619.

Soni G., Singh R., Mitra M., Falzon B.,A multifibre multilayer representative volume element (M2RVE) for prediction of matrix and interfacial damage in composite laminates,ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials,,,2012,.

Srikanth D., Kulkarni M.S.,Quality, reliability and maintenance (Q, R & M) issues in Reconfigurable Manufacturing Systems (RMS),Applied Mechanics and Materials,110-116,,2012,1442.

Sutaria M., Gada V.H., Sharma A., Ravi B.,Computation of feed-paths for casting solidification using level-set-method,Journal of Materials Processing Technology,212,6,2012,1236.

Tewari A., Suwas S., Srivastava D., Samajdar I., Haldar A.,Preface,Materials Science Forum,702-703,,2012,3.

Thakar P.S., Bandyopadhyay B., Gandhi P.S., Kurode S.,Robust control of rotary slosh using integral sliding modes,Proceedings of IEEE International Workshop on Variable Structure Systems,,,2012,440.

Tuma T., Lygeros J., Kartik V., Sebastian A., Pantazi A.,High-speed multiresolution scanning probe microscopy based on Lissajous scan trajectories,Nanotechnology,23,18,2012,.

Venugopal A., Agrawal A., Prabhu S.V.,Flow visualization studies on trapezoidal bluff body for vortex flowmeter appication,20th IMEKO World Congress 2012,1,,2012,169.

Venugopal A., Agrawal A., Prabhu S.V.,Frequency detection in vortex flowmeter for low Reynolds number using piezoelectric sensor and installation effects,Sensors and Actuators, A: Physical,184,,2012,78.

Zha, D., Chen, F., Ramamoorthy, S., Fridberger, A., Choudhury, N., Jacques, S.L., Wang, R.K., Nuttall, A.L.,In vivo outer hair cell length changes expose the active process in the cochlea,PLoS ONE,7,4,2012,.

Alankar A., Eisenlohr P., Raabe D.,A dislocation density-based crystal plasticity constitutive model for prismatic slip in α-titanium,Acta Materialia,59,18,2011,7003.

Ambad P.M., Kulkarni M.S.,Warranty logistics issues in auto engine industry,2011 IEEE International Conference on Quality and Reliability, ICQR 2011,,,2011,135.

Arora A., De A., Debroy T.,Toward optimum friction stir welding tool shoulder diameter,Scripta Materialia,64,1,2011,9.

Bajpai V., Salhotra G., Singh R.K.,Micromachining characterization of anisotropic pyrolytic carbon,Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture,225,9,2011,1591.

Bajpai V., Singh R.K.,Orthogonal micro-grooving of anisotropic pyrolyticcarbon,Materials and Manufacturing Processes,26,12,2011,1481.

Balasubramanian S., Orlicz G.C., Prestridge K.P., Balasubramaniam B.J.,Influence of initial conditions on turbulent mixing in shock driven richtmyer-meshkov flows,41st AIAA Fluid Dynamics Conference and Exhibit,,,2011,.

Balasubramanian S., Voropayev S.I., Fernando H.J.S.,Heterogeneous sediment beds under weak oscillatory flow and turbulence: Ripples transformation and decay,Ocean Engineering,38,17-18,2011,2281.

Bhandakkar T.K., Gao H.,Cohesive modeling of crack nucleation in a cylindrical electrode under axisymmetric diffusion induced stresses,International Journal of Solids and Structures,48,16-17,2011,2304.

Bhide R.R., Singh S.G., Sridharan A., Agrawal A.,An active control strategy for reduction of pressure instabilities during flow boiling in a microchannel,Journal of Micromechanics and Microengineering,21,3,2011,.

Bhide R.R., Singh S.G., Sridharan A., Agrawal A.,An active control strategy for reduction of pressure instabilities during flow boiling in a microchannel,Journal of Micromechanics and Microengineering,21,3,2011,35021.

Bhushan A., Inamdar M.M., Pawaskar D.N.,Investigation of the internal stress effects on static and dynamic characteristics of an electrostatically actuated beam for MEMS and NEMS application,Microsystem Technologies,17,12,2011,1779.

Biswas P., Narasimhan R., Tewari A.,Influence of crack tip constraint on void growth in ductile FCC single crystals,Materials Science and Engineering A,528,3,2011,823.

Bopche S.B., Sridharan A.,Local configuration factors for radiant interchange between cylindrical surfaces in rod bundle geometry,Nuclear Engineering and Design,241,3,2011,903.

Chandy A.J., Frankel S.H.,Leray-α LES of magnetohydrodynamic turbulence at low magnetic reynolds number,Journal of Turbulence,12,,2011,1.

Chaudhari M., Puranik B., Agrawal A.,Multiple orifice synthetic jet for improvement in impingement heat transfer,International Journal of Heat and Mass Transfer,54,43382,2011,2056.

Choi, C., Chang, C.-H., Krishnan, S., Hendricks, T.J.,Capillary rise and evaporative heat transfer in NANO-structured multi-mode wicks,ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011,1,,2011,.

Date A.W.,Analytic combustion: With thermodynamics, chemical kinetics, and mass transfer,Analytic Combustion: With Thermodynamics, Chemical Kinetics, and Mass Transfer,9780000000000,,2011,1.

Datta D., Gada V.H., Sharma A.,Analytical and level-set method-based numerical study for two-phase stratified flow in a plane channel and a square duct,Numerical Heat Transfer; Part A: Applications,60,4,2011,347.

De A., DebRoy T.,A perspective on residual stresses in welding,Science and Technology of Welding and Joining,16,3,2011,204.

Deepak Marla, Upendra V. Bhandarkar and Suhas S. Joshi,Critical assessment of the issues in the modeling of ablation and plasma expansion processes in the pulsed laser deposition of metals,Journal of Applied Physics,109,2,2011,21101.

Deshmukh P., Mitra S.K., Gaitonde U.N.,Investigation of natural circulation in cavities with uniform heat generation for different Prandtl number fluids,International Journal of Heat and Mass Transfer,54,43319,2011,1465.

Dhanesh P.C., Kore S.D., Date P.P.,A numerical criterion for the formation of a solid state welded joint in sheets by electromagnetic forming/joining,Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011,,,2011,1154.

Dixit P., Salonen J., Pohjonen H., Monnoyer P.,The application of dry photoresists in fabricating cost-effective tapered through-silicon vias and redistribution lines in a single step,Journal of Micromechanics and Microengineering,21,2,2011,.

Dureja A.K., Sinha S.K., Srivastava A., Sinha R.K., Chakravartty J.K., Seshu P., Pawaskar D.N.,Flow behaviour of autoclaved, 20% cold worked, Zr-2.5Nb alloy pressure tube material in the temperature range of room temperature to 800 °c,Journal of Nuclear Materials,412,1,2011,22.

Field D.P., Alankar A.,Observation of deformation and lattice rotation in a Cu bicrystal,Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science,42,3,2011,676.

Gada V.H., Sharma A.,On a novel dual-grid level-set method for two-phase flow simulation,Numerical Heat Transfer, Part B: Fundamentals,59,1,2011,26.

Gandhi P., Bhole K.,3D microfabrication using bulk lithography,ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011,11,,2011,393.

Gandhi P., Soni V., Sonawale K., Patanwala N.,Assembly guidelines for high performance meso-flexure linkage mechanisms,ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011,3,,2011,645.

Gandhi P.S., Prajapati V., Shah H., Pai R.,Development of mechanical probe station for characterization of micro-flexure mechanisms,ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011,11,,2011,439.

Gandhi P.S., Savalia A., Shah H.,Design, fabrication, and characterization of a pneumatic micro actuator,ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011,11,,2011,455.

Gandhi P.S., Sonawale K., Soni V.,Development of double parallelogram flexure mechanism via assembly route,15th National Conference on Machines and Mechanisms, NaCoMM 2011,,,2011,.

Garg M., Agrawal A., Singh R.K., Joshi S.S.,Microscopic textured surfaces for micro-fluidic applications,International Journal of Automation Technology,5,1,2011,30.

Gelu T.A., Joshi S.S., Naik N.K.,Shear properties of acrylic under high strain rate loading,Journal of Applied Polymer Science,121,3,2011,1631.

Gokhale A.A., Ravi Kumar N.V., Sudhakar B., Sahu S.N., Basumatary H., Dhara S.,Cellular metals and ceramics for defence applications,Defence Science Journal,61,6,2011,567.

Gollapudi S., Azeem M.A., Tewari A., Ramamurty U.,Orientation dependence of the indentation impression morphology in a Mg alloy,Scripta Materialia,64,2,2011,189.

Govindan P., Agrawal R., Joshi S.S.,Experimental investigation on dry EDM using helium gas dielectric,International Journal of Manufacturing Technology and Management,24,43191,2011,40.

Gowardhan A.A., Balasubramanian S., Grinstein F.F., Prestridge K.P., Ristorcelli J.R.,Analysis of computational and laboratory shocked gas-curtain experiments,6th AIAA Theoretical Fluid Mechanics Conference,,,2011,.

Guha A., Amarnath C.,Adjustable mechanism for walking robots with minimum number of actuators,Chinese Journal of Mechanical Engineering (English Edition),24,5,2011,760.

Guha A., Barron R.M., Balachandar R.,An experimental and numerical study of water jet cleaning process,Journal of Materials Processing Technology,211,4,2011,610.

Hindasageri, V., Vedula, R., Prabhu, S.,Blowoff stability of methane-air premixed flame on tube burners,International Journal of Emerging Multidisciplinary Fluid Sciences,3,4,2011,209.

Indi, A., Prabhu, S.V., Vedula, R.P.,Local heat transfer distribution in a rectangular pin channel with and without vortex generators,Experimental Heat Transfer,24,1,2011,34.

Jagad P.I., Puranik B.P., Date A.W.,A finite volume procedure on unstructured meshes for fluid-structure interaction problems,World Academy of Science, Engineering and Technology,79,,2011,639.

Jain M., Puranik B., Agrawal A.,A numerical investigation of effects of cavity and orifice parameters on the characteristics of a synthetic jet flow,Sensors and Actuators, A: Physical,165,2,2011,351.

Jain, V., Bhandarkar, U.V., Joshi, S.C., Krishnagopal, S.,Analytical study of higher order modes of elliptical cavities using oblate spheroidal eigenvalue solution,Physical Review Special Topics - Accelerators and Beams,14,4,2011,.

Joglekar M.M., Pawaskar D.N.,Closed-form empirical relations to predict the dynamic pull-in parameters of electrostatically actuated tapered microcantilevers,Journal of Micromechanics and Microengineering,21,10,2011,105014.

Joglekar M.M., Pawaskar D.N.,Closed-form empirical relations to predict the static pull-in parameters of electrostatically actuated microcantilevers having linear width variation,Microsystem Technologies,17,1,2011,35.

Joglekar M.M., Pawaskar D.N.,Estimation of oscillation period/switching time for electrostatically actuated microbeam type switches,International Journal of Mechanical Sciences,53,2,2011,116.

Jonnalagadda K.N.,Rate sensitivity in pure Ni under dynamic compression,Conference Proceedings of the Society for Experimental Mechanics Series,1,,2011,439.

Joshi M., Gandhi P.S., Lal R., Rao V.R., Mukherji S.,Modeling, simulation, and design guidelines for piezoresistive affinity cantilevers,Journal of Microelectromechanical Systems,20,3,2011,774.

Joshi S., Govindan P., Malshe A., Rajurkar K.,Experimental characterization of dry EDM performed in a pulsating magnetic field,CIRP Annals - Manufacturing Technology,60,1,2011,239.

Joshi S.N., Pande S.S.,Intelligent process modeling and optimization of die-sinking electric discharge machining,Applied Soft Computing Journal,11,2,2011,2743.

Joshi S.S.,Machining metal matrix composites using diamond tools,Machining Technology for Composite Materials: Principles and Practice,,,2011,426.

Kartik V., Pantazi A., Lantz M.A.,Track-following high frequency lateral motion of flexible magnetic media with sub-100 nm positioning error,IEEE Transactions on Magnetics,47,7,2011,1868.

Karunakaran K.P., Ramachandra S., Majila A.N., Chandrasekhar U., Shridhar B.R., Jain R., Vizhian P., Bernard A.,Analysis of the bullet nose of an aero-engine for bird impact through virtual and rapid prototyping: This paper highlights the optimisation design and production process of an aero-engine bullet nose based on FEA analysis,Virtual and Physical Prototyping,6,2,2011,121.

Kiran D.V., Basu B., Shah A.K., Mishra S., De A.,Three-dimensional heat transfer analysis of two wire tandem submerged arc welding,ISIJ International,51,5,2011,793.

Kore S.D., Date P.P., Kulkarni S.V., Kumar S., Rani D., Kulkarni M.R., Desai S.V., Rajawat R.K., Nagesh K.V., Chakravarty D.P.,Application of electromagnetic impact technique for welding copper-to-stainless steel sheets,International Journal of Advanced Manufacturing Technology,54,43443,2011,949.

Kumbhakarna N., Thynell S.T., Chowdhury A., Lin P.,Analysis of RDX-TAGzT pseudo-propellant combustion with detailed chemical kinetics,Combustion Theory and Modelling,15,6,2011,933.

Kurode S., Bandyopadhyaya B., Gandhi P.S.,Discrete sliding mode control for a class of underactuated systems,IECON Proceedings (Industrial Electronics Conference),,,2011,3936.

Lekkala R., Bajpai V., Singh R.K., Joshi S.S.,Characterization and modeling of burr formation in micro-end milling,Precision Engineering,35,4,2011,625.

Li J., Hu S.J., Carsley J.E., Lee T.M., Hector Jr. L.G., Mishra S.,Post-anneal mechanical properties of pre-strained AA5182-O sheets,ASME 2011 International Manufacturing Science and Engineering Conference, MSEC 2011,1,,2011,475.

Li J., Hu S.J., Carsley J.E., Lee T.M., Hector Jr. L.G., Mishra S.,Postanneal mechanical properties of prestrained AA5182-O sheets,Journal of Manufacturing Science and Engineering, Transactions of the ASME,133,6,2011,61007.

Mall A., Agrawal A., Singh R.K., Joshi S.S.,Numerical characterization of laminar bulk flow over textured surfaces,Journal of Micro/Nanolithography, MEMS, and MOEMS,10,2,2011,.

Mall A., Agrawal A., Singh R.K., Joshi S.S.,Numerical characterization of laminar bulk flow over textured surfaces,Journal of Micro/Nanolithography, MEMS, and MOEMS,10,2,2011,23008.

Manvatkar V.D., De A., Gokhale A.A., Jagan Reddy G.,An integrated approach towards estimation of build profile and mechanical properties in LENS® deposit of H13 tool steel,Materials Science and Technology Conference and Exhibition 2011, MS and T'11,2,,2011,1450.

Manvatkar V.D., Gokhale A.A., Jagan Reddy G., Venkataramana A., De A.,Estimation of melt pool dimensions, thermal cycle, and hardness distribution in the laser-engineered net shaping process of austenitic stainless steel,Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science,42,13,2011,4080.

Marla D., Bhandarkar U.V., Joshi S.S.,Critical assessment of the issues in the modeling of ablation and plasma expansion processes in the pulsed laser deposition of metals,Journal of Applied Physics,109,2,2011,21101.

Marla, D., Bhandarkar, U.V., Joshi, S.S.,Critical assessment of the issues in the modeling of ablation and plasma expansion processes in the pulsed laser deposition of metals,Journal of Applied Physics,109,2,2011,.

Mastud S., Singh R.K., Samuel J., Joshi S.S.,Comparative analysis of the process mechanics in micro-electrical discharge machining (EDM) and reverse micro-EDM,ASME 2011 International Manufacturing Science and Engineering Conference, MSEC 2011,2,,2011,349.

Mehta M., Arora A., De A., Debroy T.,Tool geometry for friction stir welding - Optimum shoulder diameter,Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science,42,9,2011,2716.

Mittal, Rajat; Zheng, Xudong; Bhardwaj, Rajneesh; Seo, Jung Hee; Xue, Qian; Bielamowicz, Steven;,Toward a simulation-based tool for the treatment of vocal fold paralysis,Frontiers in physiology,2,,2011,19.

Moser R.D., Bhattacharya A., Malaya N.,Modeling multi-point correlations in wall-bounded turbulence,ERCOFTAC Series,14,,2011,29.

Mote, R.G., Yu, S.F., Kumar, A., Zhou, W., Li, X.F.,Experimental demonstration of near-field focusing of a phase micro-Fresnel zone plate (FZP) under linearly polarized illumination,Applied Physics B: Lasers and Optics,102,1,2011,95.

Murali P., Bhandakkar T.K., Cheah W.L., Jhon M.H., Gao H., Ahluwalia R.,Role of modulus mismatch on crack propagation and toughness enhancement in bioinspired composites,Physical Review E - Statistical, Nonlinear, and Soft Matter Physics,84,1,2011,15102.

Nalawade R.S., Date P.P., Mahadik K.N., Cheekatla V.S.K.,Control of end defect on rolled bar,Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011,,,2011,61.

Orlicz G.C., Balasubramanian S., Prestridge K.P., Balakumar B.J.,Investigation of mach number effects on the richtmyer-meshkov instability using simultaneous PIV and PLIF imaging diagnostics,41st AIAA Fluid Dynamics Conference and Exhibit,,,2011,.

P. Tandaiya, U. Ramamurty and R. Narasimhan, On Numerical implementation of an isotropic elastic-viscoplastic constitutive model for bulk metallic glasses, Modelling and Simulation in Material Science and Engineering, 19,, 2011,10.1088/0965-0393/19/1/015002, 15002

Panchal, V., Lahoti, G., Bhandarkar, U., Neergat, M.,The effects of process parameters on yield and properties of iron nanoparticles from ferrocene in a low-pressure plasma,Journal of Physics D: Applied Physics,44,34,2011,.

Panchal, V., Neergat, M., Bhandarkar, U.,Synthesis and characterization of carbon coated nanoparticles produced by a continuous low-pressure plasma process,Journal of Nanoparticle Research,13,9,2011,3825.

Pandey D., Kulkarni M.S., Vrat P.,A methodology for joint optimization for maintenance planning, process quality and production scheduling,Computers and Industrial Engineering,61,4,2011,1098.

PARADKAR S., PANDE S.S.,Intelligent detection of microcalcification from digitized mammograms,Sadhana - Academy Proceedings in Engineering Sciences,36,1,2011,125.

Patil R.R., Anurag Tilak C.J.K., Srivastava V., De A.,Minimising electrode wear in resistance spot welding of aluminium alloys,Science and Technology of Welding and Joining,16,6,2011,509.

Pawade R.S., Joshi S.S., Sonawane H.A., Bhopale N.N.,Analysis and modeling of cutting forces in ball end milling of superalloy Inconel 718,Journal of the Institution of Engineers (India): Mechanical Engineering Division,92,APRIL,2011,11.

Pawade R.S., Joshi S.S.,Mechanism of chip formation in high-speed turning of inconel 718,Machining Science and Technology,15,1,2011,132.

Pawade R.S., Joshi S.S.,Multi-objective optimization of surface roughness and cutting forces in high-speed turning of Inconel 718 using Taguchi grey relational analysis (TGRA),International Journal of Advanced Manufacturing Technology,56,43191,2011,47.

Prabhudharwadkar D.M., Aghalayam P.A., Iyer K.N.,Simulation of hydrogen mitigation in catalytic recombiner: Part-I: Surface chemistry modelling,Nuclear Engineering and Design,241,5,2011,1746.

Prabhudharwadkar D.M., Iyer K.N., Mohan N., Bajaj S.S., Markandeya S.G.,Simulation of hydrogen distribution in an Indian Nuclear Reactor Containment,Nuclear Engineering and Design,241,3,2011,832.

Prabhudharwadkar D.M., Iyer K.N.,Simulation of hydrogen mitigation in catalytic recombiner. Part-II: Formulation of a CFD model,Nuclear Engineering and Design,241,5,2011,1758.

Prasad K., Paramane S.B., Agrawal A., Sharma A.,Effect of channel-confinement and rotation on the two-dimensional laminar flow and heat transfer across a cylinder,Numerical Heat Transfer; Part A: Applications,60,8,2011,699.

Puthumana G., Joshi S.S.,Investigations into performance of dry EDM using slotted electrodes,International Journal of Precision Engineering and Manufacturing,12,6,2011,957.

Rai R., De A., Bhadeshia H.K.D.H., DebRoy T.,Review: Friction stir welding tools,Science and Technology of Welding and Joining,16,4,2011,325.

Rajkumar K., Kundu K., Aravindan S., Kulkarni M.S.,Accelerated wear testing for evaluating the life characteristics of copper-graphite tribological composite,Materials and Design,32,5,2011,3029.

Ramamoorthy, S., Nuttall, A.L.,Outer hair cell electromotility in vivo,AIP Conference Proceedings,1403,,2011,176.

Rane M V, Joshi S M, “Plastic Solar Air Heaters for Low Temperature Applications”, International Conference on Advances in Energy Research", ICAER 2011, Dec 9 to 11, 2011, Mumbai, INDIA.

Rane M V, Mehta J R “Testing of Evacuated Tube Collector for Saturated Steam Generation and Water Heating”, International Conference on Advances in Energy Research, ICAER 2011, Dec 9 to 11, 2011, Mumbai, INDIA.

Rane M V, Mehta J R, Srivats V S, “Low Temperature Re-generator for 3 TR Solar Air Conditioner”, International Conference on Advances in Energy Research, ICAER 2011, Dec 9 to 11, 2011, Mumbai, INDIA

Rane M V, Mehta J R, “Novel Heat Pipe based Evacuated Glass Tube Collector”, International Conference on Advances in Energy Research, ICAER 2011, Dec 9 to 11, 2011, Mumbai, INDIA.

Rane M V, Padiya Y S “Heat Pump Operated Freeze Concentration System with Tubular Heat Exchanger for Seawater Desalination”, Energy for Sustainable Development, Vol 15, Issue 2,June 2011, pp 184-191.

Rane M V, Sarangi R K, “Pulsating Heat Pipe for as Air to Air Heat Recovery System”, International Conference on Advances in Energy Research, ICAER 2011, Dec 9 to 11, 2011, Mumbai, INDIA.

Rane M V, Shankargouda S J, “Solar Thermoelectric Cogeneration”, International Conference on Advances in Energy Research, ICAER 2011, Dec 9 to 11, 2011, Mumbai, INDIA.

Rane, M.V., Padiya, Y.S.,Heat pump operated freeze concentration system with tubular heat exchanger for seawater desalination,Energy for Sustainable Development,15,2,2011,184.

Raveendra S., Kanjarla A.K., Paranjape H., Mishra S.K., Mishra S., Delannay L., Samajdar I., Van Houtte P.,Strain mode dependence of deformation texture developments: Microstructural origin,Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science,42,7,2011,2113.

Raykar, N.R., Maiti, S.K., Singh Raman, R.K.,Modelling of mode-I stable crack growth under hydrogen assisted stress corrosion cracking,Engineering Fracture Mechanics,78,18,2011,3153.

S.M. Khot and Nitesh P. Yelve, Modelling and response analysis of dynamic systems by using ANSYS© and MATLAB©, Journal of Vibration and Control, 17, 6, 2011, DOI:10.1177/1077546310377913, 953–958

Saha S.K., Dutta P.,Effect of melt convection on the optimum thermal design of heat sinks with phase change material,Journal of Enhanced Heat Transfer,18,3,2011,249.

Salhotra G., Bajpai V., Singh R.K.,Finite element modeling of orthogonal cutting of pyrolytic carbon,ASME 2011 International Manufacturing Science and Engineering Conference, MSEC 2011,1,,2011,153.

Sardeshpande V., Anthony R., Gaitonde U.N., Banerjee R.,Performance analysis for glass furnace regenerator,Applied Energy,88,12,2011,4451.

Sewatkar C.M., Sharma A., Agrawal A.,Simulation of flow across a row of transversely oscillating square cylinders,Journal of Fluid Mechanics,680,,2011,361.

Shah R., Date A.W.,Steady-state thermochemical model of a wood-burning cook-stove,Combustion Science and Technology,183,4,2011,321.

Shendage D.J., Kedare S.B., Bapat S.L.,An analysis of beta type Stirling engine with rhombic drive mechanism,Renewable Energy,36,1,2011,289.

Shendage D.J., Kedare S.B., Bapat S.L.,Investigations on performance of stirling engine regenerator matrix,ASME/JSME 2011 8th Thermal Engineering Joint Conference, AJTEC 2011,,,2011,.

Shetty D.A., Shen J., Chandy A.J., Frankel S.H.,A pressure-correction scheme for rotational Navier-Stokes equations and its application to rotating turbulent flows,Communications in Computational Physics,9,3,2011,740.

Shukla R., Gandhi P., Lim L.-C., Shukla R., Lim L.-C.,Electric-Field and Stress Effects on Depoling and Overpoling Phenomena in [001]-Poled Transverse Mode Pb(Zn1/3Nb2/3)O3-(6–7)%PbTiO3 Single Crystal of [110] Length Cut,IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control,58,9,2011,1874.

Shukla R., Lim L.-C., Gandhi P.,Tensile stress induced depolarization in [001]-poled transverse mode Pb(Zn1/3Nb2/3)O3 -(6-7)%PbTiO3 single crystals,Journal of Applied Physics,109,7,2011,74108.

Shukla R., Lim L.C., Gandhi P.,X-pod: A novel small footprint multi-legged piezoelectric single crystal actuator concept,2011 International Symposium on Applications of Ferroelectrics and 2011 International Symposium on Piezoresponse Force Microscopy and Nanoscale Phenomena in Polar Materials, ISAF/PFM 2011,,,2011,6013996.

Singh R.K., Joseph V.R., Melkote S.N.,A statistical approach to the optimization of a laser-assisted micromachining process,International Journal of Advanced Manufacturing Technology,53,43191,2011,221.

Singh S.G., Agrawal A., Duttagupta S.P.,Reliable MOSFET operation using two-phase microfluidics in the presence of high heat flux transients,Journal of Micromechanics and Microengineering,21,10,2011,.

Sonawane S., Bhandarkar U., Puranik B., Sunil Kumar S.,Effect of particle size in aviation turbine fuel-Al 2O 3 nanofluids for heat transfer applications,World Academy of Science, Engineering and Technology,81,,2011,548.

Sonawane S., Patankar K., Fogla A., Puranik B., Bhandarkar U., Sunil Kumar S.,An experimental investigation of thermo-physical properties and heat transfer performance of Al2O3-Aviation Turbine Fuel nanofluids,Applied Thermal Engineering,31,14-15,2011,2841.

Sonawane, S., Bhandarkar, U., Puranik, B., Sunil Kumar, S.,Effect of particle size in aviation turbine fuel-Al<inf>2</inf>O<inf>3</inf>nanofluids for heat transfer applications,World Academy of Science, Engineering and Technology,81,,2011,548.

Sonawane, S., Patankar, K., Fogla, A., Puranik, B., Bhandarkar, U., Sunil Kumar, S.,An experimental investigation of thermo-physical properties and heat transfer performance of Al<inf>2</inf>O<inf>3</inf>-Aviation Turbine Fuel nanofluids,Applied Thermal Engineering,31,14-15,2011,2841.

Soni B., Date A.W.,Prediction of turbulent heat transfer in radially outward flow in a twisted-tape inserted tube rotating in orthogonal mode,Computational Thermal Sciences,3,1,2011,49.

Srivastava A., Tsukamoto K., Murayama K.,Single lens-based schlieren microscope for investigation of three-dimensional buoyancy-induced convective flow fields,Journal of Flow Visualization and Image Processing,18,4,2011,347.

Suryakumar S., Karunakaran K.P., Bernard A., Chandrasekhar U., Raghavender N., Sharma D.,Weld bead modeling and process optimization in Hybrid Layered Manufacturing,CAD Computer Aided Design,43,4,2011,331.

Sutaria M., Joshi D., Jagdishwar M., Ravi B.,Automatic optimization of casting feeders using feed-paths generated by VEM,ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011,3,,2011,137.

Talukdar S., Kulkarni S.,A comparative analysis of a rigid bicycle model with an elastic bicycle model for small trucks,SAE 2011 World Congress and Exhibition,,,2011,.

Talukdar S., Kulkarni S.,A comparative analysis of a rigid bicycle model with an elastic bicycle model for small trucks,SAE Technical Papers,,,2011,.

Tandaiya, P., Ramamurty, U., Narasimhan, R.,On numerical implementation of an isotropic elastic-viscoplastic constitutive model for bulk metallic glasses,Modelling and Simulation in Materials Science and Engineering,19,1,2011,.

Trivedi R.R., Joglekar M.M., Shimpi R.P., Pawaskar D.N.,Shape optimization of electrostatically actuated micro cantilever beam with extended travel range using simulated annealing,Proceedings of the World Congress on Engineering 2011, WCE 2011,3,,2011,2042.

Varma N., Ukhande M., Date P.P.,On the experimental verification of the numerical simulation based inferences from strain distribution in axisymmetric drawn sheet metal parts,AIP Conference Proceedings,1383,,2011,717.

Venugopal A., Agrawal A., Prabhu S.V.,Influence of blockage and shape of a bluff body on the performance of vortex flowmeter with wall pressure measurement,Measurement: Journal of the International Measurement Confederation,44,5,2011,954.

Venugopal A., Agrawal A., Prabhu S.V.,Review on vortex flowmeter - Designer perspective,Sensors and Actuators, A: Physical,170,43132,2011,8.

Wang, H., Hendricks, T., Krishnan, S., Peterson, R.,Experimental verification of thermally activated power and cooling system using hybrid thermoelectric, organic Rankine cycle and vapor compression cycle,9th Annual International Energy Conversion Engineering Conference, IECEC 2011,,,2011,.

Watvisave D.S., Bhandarkar U.V., Puranik B.P.,Numerical investigation of shock tube flow under rarefied conditions,AIP Conference Proceedings,1333,PART 1,2011,372.

Watvisave, D.S., Bhandarkar, U.V., Puranik, B.P.,Numerical investigation of shock tube flow under rarefied conditions,AIP Conference Proceedings,1333,PART 1,2011,372.

Wegeng, R.S., Palo, D.R., Dagle, R.A., Humble, P.H., Lizarazo-Adarme, J.A., Krishnan, S., Leith, S.D., Pestak, C.J., Qiu, S., Boler, B., Modrell, J., McFadden, G.,Development and demonstration of a prototype solar methane reforming system for thermochemical energy storage - Including preliminary shakedown testing results,9th Annual International Energy Conversion Engineering Conference, IECEC 2011,,,2011,.

Xiao, Junfeng; Bhardwaj, Rajneesh; Attinger, Daniel;,Manufacturing self-assembled coatings of micro-and nano-particles by controlled evaporation of drops and thin films,Micro-and Nanotechnology Sensors, Systems, and Applications III,8031,,2011,80310X.

Zheng, J., Ramamoorthy, S., Ren, T., He, W., Zha, D., Chen, F., Magnusson, A., Nuttall, A.L., Fridberger, A.,Persistence of past stimulations: Storing sounds within the inner ear,Biophysical Journal,100,7,2011,1627.

Agarwal M., Gulia A., Ravi B., Ghyar R., Puri A.,Revision of broken knee megaprostheses: New solution to old problems,Clinical Orthopaedics and Related Research,468,11,2010,2904.

Agrawal A., Djenidi L., Antonia R.A.,Near-field measurements and development of a new boundary layer over a flat plate with localized suction,Experiments in Fluids,48,5,2010,747.

Agrawal A.,Analysis of vortex cores in turbulent flows,Journal of Turbulence,11,,2010,1.

Alankar A., Mastorakos I.N., Field D.P.,Development of a 3D crystal plasticity model that tracks dislocation density evolution,Solid State Phenomena,160,,2010,57.

Alankar A., Mastorakos I.N., Field D.P.,Grain interactions and dislocation density evolution during channel die compression of aluminum,TMS Light Metals,,,2010,579.

Alankar A., Wells M.A.,Constitutive behavior of as-cast aluminum alloys AA3104, AA5182 and AA6111 at below solidus temperatures,Materials Science and Engineering A,527,29-30,2010,7812.

Azeem M.A., Tewari A., Mishra S., Gollapudi S., Ramamurty U.,Development of novel grain morphology during hot extrusion of magnesium AZ21 alloy,Acta Materialia,58,5,2010,1495.

Azeem M.A., Tewari A., Ramamurty U.,Effect of recrystallization and grain growth on the mechanical properties of an extruded AZ21 Mg alloy,Materials Science and Engineering A,527,43224,2010,898.

Bag S., De A.,Probing reliability of transport phenomena based heat transfer and fluid flow analysis in autogeneous fusion welding process,Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science,41,9,2010,2337.

Bhandakkar T.K., Chason E., Gao H.,Analytical model of transient compressive stress evolution during growth of high diffusivity thin films on substrates,Philosophical Magazine,90,22,2010,3037.

Bhandakkar T.K., Chng A.C., Curtin W.A., Gao H.,Dislocation shielding of a cohesive crack,Journal of the Mechanics and Physics of Solids,58,4,2010,530.

Bhandakkar T.K., Gao H.,Cohesive modeling of crack nucleation under diffusion induced stresses in a thin strip: Implications on the critical size for flaw tolerant battery electrodes,International Journal of Solids and Structures,47,10,2010,1424.

Bhardwaj, Rajneesh; Fang, Xiaohua; Somasundaran, Ponisseril; Attinger, Daniel;,Self-assembly of colloidal particles from evaporating droplets: role of DLVO interactions and proposition of a phase diagram,Langmuir,26,11,2010,7833-7842.

Bhardwaj, Rajneesh; Longtin, Jon P; Attinger, Daniel;,Interfacial temperature measurements, high-speed visualization and finite-element simulations of droplet impact and evaporation on a solid surface,International Journal of Heat and Mass Transfer,53,19-20,2010,3733-3744.

Bhardwaj, Rajneesh;,An investigation of the evaporation of a droplet on a solid surface: evaporation, self-assembly of colloidal deposits, and interfacial heat transfer,,,,2010,.

Bhattacharya A., Balazs A.C.,Biomimetic chemical signaling across synthetic microcapsule arrays,Journal of Materials Chemistry,20,46,2010,10384.

Bhattacharya A., Balazs A.C.,Designing microcapsule arrays that propagate chemical signals,Physical Review E - Statistical, Nonlinear, and Soft Matter Physics,82,2,2010,21801.

Bopche S.B., Sridharan A.,Analytical expressions for configuration factor between cylindrical surfaces in rod bundle geometry,Nuclear Engineering and Design,240,10,2010,3020.

Bopche S.B., Sridharan A.,Experimental investigations on decay heat removal in advanced nuclear reactors using single heater rod test facility: Air alone in the annular gap,Experimental Thermal and Fluid Science,34,8,2010,1456.

Chaudhari M., Puranik B., Agrawal A.,Effect of orifice shape in synthetic jet based impingement cooling,Experimental Thermal and Fluid Science,34,2,2010,246.

Chaudhari M., Puranik B., Agrawal A.,Heat transfer analysis in a rectangular duct without and with cross-flow and an impinging synthetic jet,IEEE Transactions on Components and Packaging Technologies,33,2,2010,488.

Chaudhari M., Puranik B., Agrawal A.,Heat transfer characteristics of synthetic jet impingement cooling,International Journal of Heat and Mass Transfer,53,43256,2010,1057.

Chavan A.T., Manik D.N.,Sensitivity analysis of vibro-acoustic systems in statistical energy analysis framework,Structural and Multidisciplinary Optimization,40,43252,2010,283.

Chavan, A.T., Manik, D.N.,Sensitivity analysis of vibro-acoustic systems in statistical energy analysis framework,Structural and Multidisciplinary Optimization,40,43252,2010,283.

Chowdhury A., Thynell S.T.,Confined rapid thermolysis/FTIR/ToF studies of methyl-amino-triazolium- based energetic ionic liquids,Thermochimica Acta,505,43132,2010,33.

Chowdhury A., Thynell S.T.,Kinetics of decomposition of energetic ionic liquids,Propellants, Explosives, Pyrotechnics,35,6,2010,572.

Dabade U.A., Joshi S.S.,Some aspects of improving integrity of machined surfaces on Al/SiCp metal matrix composites,Key Engineering Materials,443,,2010,596.

Dabade U.A., Sonawane H.A., Joshi S.S.,Cutting forces and surface roughness in machining Al/SiCp composites of varying composition,Machining Science and Technology,14,2,2010,258.

Das S., Joshi S.S.,Modeling of spark erosion rate in microwire-EDM,International Journal of Advanced Manufacturing Technology,48,43317,2010,581.

Demsis A., Prabhu S.V., Agrawal A.,Influence of wall conditions on friction factor for flow of gases under slip condition,Experimental Thermal and Fluid Science,34,8,2010,1448.

Demsis A., Verma B., Prabhu S.V., Agrawal A.,Heat transfer coefficient of gas flowing in a circular tube under rarefied condition,International Journal of Thermal Sciences,49,10,2010,1994.

Dongre G.G., Vesvikar C., Singh R.K., Joshi S.S.,Efficient dicing of silicon ingots for photovoltaic applications,Conference Record of the IEEE Photovoltaic Specialists Conference,,,2010,3629.

Gada V.H., Sharma A.,Simulation of multi-mode film boiling using level set method,ASME International Mechanical Engineering Congress and Exposition, Proceedings,9,PART C,2010,1611.

Gandhi P.S., Deshmukh S.,A 2D optomechanical focused laser spot scanner: Analysis and experimental results for microstereolithography,Journal of Micromechanics and Microengineering,20,1,2010,15035.

Govindan P., Joshi S.S.,Experimental characterization of material removal in dry electrical discharge drilling,International Journal of Machine Tools and Manufacture,50,5,2010,431.

Guha A., Amarnath C., Pateria S., Mittal R.,Measurement of yarn hairiness by digital image processing,Journal of the Textile Institute,101,3,2010,214.

Guha A., Frigaard I.A.,On the stability of plane Couette-Poiseuille flow with uniform crossflow,Journal of Fluid Mechanics,656,,2010,417.

Guha A., Frigaard I.A.,Unconditional linear stability of plane couette-poiseuille flow in presence of cross flow,ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE),7,PARTS A AND B,2010,101.

Guha A.,Performance evaluation and enhancement of artificial neural networks in prediction modelling,Soft Computing in Textile Engineering,,,2010,126.

Hendricks, T.J., Krishnan, S., Choi, C., Chang, C.-H., Paul, B.,Enhancement of pool boiling heat transfer using nanostructured surfaces on aluminum and copper,ASME International Mechanical Engineering Congress and Exposition, Proceedings,12,PART B,2010,.

Hendricks, T.J., Krishnan, S., Choi, C., Chang, C.-H., Paul, B.,Enhancement of pool-boiling heat transfer using nanostructured surfaces on aluminum and copper,International Journal of Heat and Mass Transfer,53,15-16,2010,.

J. Franch, S.K. Agrawal, and V. Sangwan, “Differential Flatness of a Class of Planar n-DOF Robot Manipulators Driven by 1 or 2 Actuators,” IEEE Transactions on Automatic Control, vol. 55, no. 2, pp. 548-554, 2010.

J.C. Ryu, V. Sangwan, and S.K. Agrawal, “Differentially Flat Designs of Under-Actuated Mobile Manipulators,” ASME Journal of Dynamic Systems Measurement and Control, vol. 132, no. 2, 024502 (6pages), 2010.

Jadhav, D.N., Maiti, S.K.,Characterization of stable crack growth through AISI 4340 steel using cohesive zone modeling and CTOD/CTOA criterion,Nuclear Engineering and Design,240,4,2010,713.

Jain, V., Bhandarkar, U.V., Yadav, S., Joshi, S.C., Ghodke, A.D., Lad, M., Hannurkar, P.R.,Estimation of higher order modes of INDUS-2 RF cavity using combined electromagnetic-thermal-structural simulations,Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment,612,2,2010,225.

Jayakumar J.S., Mahajani S.M., Mandal J.C., Iyer K.N., Vijayan P.K.,CFD analysis of single-phase flows inside helically coiled tubes,Computers and Chemical Engineering,34,4,2010,430.

Jayakumar J.S., Mahajani S.M., Mandal J.C., Iyer K.N., Vijayan P.K.,Thermal hydraulic characteristics of air-water two-phase flows in helical pipes,Chemical Engineering Research and Design,88,4,2010,501.

Jayaram K., Joshi S.S.,Development of a flexure-based, force-sensing microgripper for micro-object manipulation,Journal of Micromechanics and Microengineering,20,1,2010,.

Joglekar M.M., Pawaskar D.N.,Shape optimization of electrostatically actuated microbeams with extended static and dynamic operating ranges,ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE),10,,2010,245.

Jonnalagadda K., Karanjgaokar N., Chasiotis I., Chee J., Peroulis D.,Strain rate sensitivity of nanocrystalline Au films at room temperature,Acta Materialia,58,14,2010,4674.

Jonnalagadda K.N., Chasiotis I., Yagnamurthy S., Lambros J., Pulskamp J., Polcawich R., Dubey M.,Experimental investigation of strain rate dependence of nanocrystalline Pt films,Experimental Mechanics,50,1,2010,25.

Jonnalagadda K.N., Chasiotis I., Yagnamurthy S., Lambros J., Pulskamp J., Polcawich R., Dubey M.,Experimental investigation of strain rate dependence of nanocrystalline Pt films,Proceedings of the Society for Experimental Mechanics, Inc.,67,,2010,25.

Joshi D., Ravi B.,Early castability evaluation using analytical hierarchy process,International Journal of Advanced Manufacturing Technology,50,43191,2010,21.

Joshi D., Ravi B.,Minimizing porosity in cast junctions,Metal Casting Design and Purchasing,12,1,2010,34.

Joshi D., Ravi B.,Quantifying the shape complexity of cast parts,Computer-Aided Design and Applications,7,5,2010,685.

Joshi H., Agarwal A., Puranik B., Shu C., Agrawal A.,A hybrid FVM-LBM method for single and multi-fluid compressible flow problems,International Journal for Numerical Methods in Fluids,62,4,2010,403.

Joshi S.N., Pande S.S.,Thermo-physical modeling of die-sinking EDM process,Journal of Manufacturing Processes,12,1,2010,45.

K Anand, A Ranjan, P S Mehta,Estimating the viscosity of vegetable oil and biodiesel fuels,,Energy & Fuels,24,1,2010,664–672.

K Anand, A Ranjan, P S Mehta,Predicting density of straight and processed vegetable oils from fatty acid composition,Energy & Fuels,24,5,2010,3262–3266.

Kartik V., Pantazi A., Lantz M.A.,Track-following high frequency lateral motion of flexible media,Digest of the Asia-Pacific Magnetic Recording Conference 2010, APMRC 2010,,,2010,.

Kartik V., Sebastian A., Tuma T., Sahoo D.R., Pozidis H., Pantazi A.,High speed nanopositioner with magneto resistance-based position sensing,IFAC Proceedings Volumes (IFAC-PapersOnline),43,18,2010,306.

Karunakaran K.P., Shah M., Shringi R., Bernard A., Arrazola P.J.,Offline adaptive control,International Journal of Machining and Machinability of Materials,8,43193,2010,356.

Karunakaran K.P., Shringi R., Ramamurthi D., Hariharan C.,Octree-based NC simulation system for optimization of feed rate in milling using instantaneous force model,International Journal of Advanced Manufacturing Technology,46,43317,2010,465.

Karunakaran K.P., Suryakumar S., Pushpa V., Akula S.,Low cost integration of additive and subtractive processes for hybrid layered manufacturing,Robotics and Computer-Integrated Manufacturing,26,5,2010,490.

Kiran D.V., Basu B., Shah A.K., Mishra S., De A.,Probing influence of welding current on weld quality in two wire tandem submerged arc welding of HSLA steel,Science and Technology of Welding and Joining,15,2,2010,111.

Kore S.D., Date P.P., Kulkarni S.V., Kumar S., Rani D., Kulkarni M.R., Desai S.V., Rajawat R.K., Nagesh K.V., Chakravarty D.P.,Electromagnetic impact welding of copper-to-copper sheets,International Journal of Material Forming,3,2,2010,117.

Kore S.D., Dhanesh P., Kulkarni S.V., Date P.P.,Numerical modeling of electromagnetic welding,International Journal of Applied Electromagnetics and Mechanics,32,1,2010,1.

Krishnan, S., Palo, D.R., Wegeng, R.S.,Cycle evaluations of reversible chemical reactions for solar thermochemical energy storage in support of concentrating solar power generation systems,8th Annual International Energy Conversion Engineering Conference,,,2010,.

Kumar Lad B., Kulkarni M.S.,A parameter estimation method for machine tool reliability analysis using expert judgement,International Journal of Data Analysis Techniques and Strategies,2,2,2010,155.

Kurode S., Bandyopadhyay B., Gandhi P.S.,Robust control for slosh-free motion using sliding modes,IECON Proceedings (Industrial Electronics Conference),,,2010,2408.

Lad B.K., Kulkarni M.S.,A mechanism for linking user's operational requirements with reliability and maintenance schedule for machine tool,International Journal of Reliability and Safety,4,4,2010,343.

Lad K.B., Kulkarni M.S.,An expert based methodology for cost oriented analysis of machine tool reliability,International Journal of Performability Engineering,6,2,2010,137.

Limaye, M.D., Vedula, R.P., Prabhu, S.V.,Local heat transfer distribution on a flat plate impinged by a compressible round air jet,International Journal of Thermal Sciences,49,11,2010,2157.

Lin N., Miao J., Dixit P.,Mechanical and microstructural characterization of through-silicon via fabricated with constant current pulse-reverse modulation,Journal of the Electrochemical Society,157,6,2010,D323.

Mote, R.G., Zhou, W., Fu, Y.,Beaming of light through depth-tuned plasmonic nanostructures,Optik,121,21,2010,1962.

Mujumdar S.S., Mastud S.A., Singh R.K., Joshi S.S.,Experimental characterization of the reverse micro-electrodischarge machining process for fabrication of high-aspect-ratio micro-rod arrays,Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture,224,5,2010,777.

Nadella R., Sahu S.N., Gokhale A.A.,Foaming characteristics of Al-Si-Mg (LM25) alloy prepared by liquid metal processing,Materials Science and Technology,26,8,2010,908.

Nair P., Jayachandran T., Deepu M., Puranik B.P., Bhandarkar U.V.,Numerical simulation of interaction of sonic jet with high speed flow over a blunt body using solution mapped higher order accurate AUSM+-UP based flow solver,Journal of Applied Fluid Mechanics,3,1,2010,15.

Nair, P., Jayachandran, T., Deepu, M., Puranik, B.P., Bhandarkar, U.V.,Numerical simulation of interaction of sonic jet with high speed flow over a blunt body using solution mapped higher order accurate AUSM+-UP based flow solver,Journal of Applied Fluid Mechanics,3,1,2010,15.

Pable M.J., Seshu P.,Optimization of passive suspensions to mimic active suspensions,Advances in Vibration Engineering,9,2,2010,131.

Padhye R.S., Milind T.R., Date P.P.,Texture and grain refinement in equal channel angular pressing using round corner dies,AIP Conference Proceedings,1315,,2010,536.

Paramane S.B., Sharma A.,Effect of cross-stream buoyancy and rotation on the free-stream flow and heat transfer across a cylinder,International Journal of Thermal Sciences,49,10,2010,2008.

Paramane S.B., Sharma A.,Heat and fluid flow across a rotating cylinder dissipating uniform heat flux in 2D laminar flow regime,International Journal of Heat and Mass Transfer,53,21-22,2010,4672.

Prabhudharwadkar D.M., More R.Z., Iyer K.N.,Experimental study of liquid carryover in a separator drum,Nuclear Engineering and Design,240,1,2010,76.

Ramamoorthy, S., Zha, D.-J., Nuttall, A.L.,The biophysical origin of traveling-wave dispersion in the cochlea,Biophysical Journal,99,6,2010,1687.

Rane M V “Energy Conservation Using Superheat Recovery and Heat Pumps”, Air Conditioning and Refrigeration Journal, Vol 13, No 2, April-June 2010, pp 184-19.

Rane M V, Mehta J R “Performance of Novel Heat Pipe Based Evacuated Tube Collector for Saturated Steam Generation at 1 Bar”, Journal of the Solar Energy Society of India, Vol 20, No. 1 & 2, June-December 2010, pp 80–93

Ravi K., Gupta S.K., Sharma A., Iyer K.,Compressible flow behaviour through wavy channels,2010 2nd International Conference on Reliability, Safety and Hazard, ICRESH-2010: Risk-Based Technology and Physics-of-Failure Methods,,,2010,288.

Ravi Kumar N.V., Ramachandra Rao N., Sudhakar B., Gokhale A.A.,Foaming experiments on LM25 alloy reinforced with SiC particulates,Materials Science and Engineering A,527,21-22,2010,6082.

Reddy G.J., Srinivasan N., Gokhale A.A., Kashyap B.P.,Effect of HIPing on microstructure and properties of spray formed Al-Li alloy UL40,Powder Metallurgy,53,3,2010,223.

Saha S.K., Dutta P.,Heat transfer correlations for PCM-based heat sinks with plate fins,Applied Thermal Engineering,30,16,2010,2485.

Sahoo D.R., Kartik V., Sebastian A., Pozidis H.,Scanning probe microscopy using higher-mode electrostatically-actuated microcantilevers,IFAC Proceedings Volumes (IFAC-PapersOnline),43,18,2010,212.

Sewatkar C.M., Sharma A., Agrawal A.,A first attempt to numerically compute forces on birds in v formation,Artificial Life,16,3,2010,245.

Shetty D.A., Chandy A.J., Frankel S.H.,A new fractal interaction by exchange with the mean mixing model for large eddy simulation/filtered mass density function applied to a multiscalar three-stream turbulent jet,Physics of Fluids,22,2,2010,1.

Shukla R., Rajan K.K., Shanthi M., Jin J., Lim L.-C., Gandhi P.,Deduced property matrices of domain-engineered relaxor single crystals of [110]L × [001]T cut: Effects of domain wall contributions and domain-domain interactions,Journal of Applied Physics,107,1,2010,14102.

Singh R.K., Tiwari A., Kulkarni M.S., Rao P.V.M.,An expert system for selecting accessories for lean machine tools,Advances in Intelligent and Soft Computing,66 AISC,,2010,569.

Sonawane H.A., Joshi S.S.,Analytical modeling of chip geometry and cutting forces in helical ball end milling of superalloy Inconel 718,CIRP Journal of Manufacturing Science and Technology,3,3,2010,204.

Sonawane H.A., Joshi S.S.,Investigation on chip morphology and surface quality in high-speed ball-end milling of Inconel 718,Key Engineering Materials,443,,2010,353.

Song J., Curtin W.A., Bhandakkar T.K., Gao H.J.,Dislocation shielding and crack tip decohesion at the atomic scale,Acta Materialia,58,18,2010,5933.

Srinath G., Vadiraj A., Balachandran G., Sahu S.N., Gokhale A.A.,Characteristics of aluminium metal foam for automotive applications,Transactions of the Indian Institute of Metals,63,5,2010,765.

Subburaj K., Ravi B., Agarwal M.,Computer-aided methods for assessing lower limb deformities in orthopaedic surgery planning,Computerized Medical Imaging and Graphics,34,4,2010,277.

Sunil V.B., Agarwal R., Pande S.S.,An approach to recognize interacting features from B-Rep CAD models of prismatic machined parts using a hybrid (graph and rule based) technique,Computers in Industry,61,7,2010,686.

Tewari A., Biswas P.,Effect of amount, size, and spatial distribution of intermetallics on incipient localization during plastic deformation,Journal of Materials Science,45,6,2010,1567.

Tewari A., Tiwari S., Biswas P., Vijayalakshmi S., Mishra R.K.,Vectorized 3D microstructure for finite element simulations,Materials Characterization,61,11,2010,1211.

Tikekar M., Singh S.G., Agrawal A.,Measurement and modeling of pulsatile flow in microchannel,Microfluidics and Nanofluidics,9,6,2010,1225.

Tiwari S., Tewari A.,Inherent limitations of bitmap discretization in quantitative microstructural analysis,Materials Characterization,61,5,2010,493.

Vasantgadkar N.A., Bhandarkar U.V., Joshi S.S.,A finite element model to predict the ablation depth in pulsed laser ablation,Thin Solid Films,519,4,2010,1421.

Vasantgadkar, N.A., Bhandarkar, U.V., Joshi, S.S.,A finite element model to predict the ablation depth in pulsed laser ablation,Thin Solid Films,519,4,2010,1421.

Venugopal A., Agrawal A., Prabhu S.V.,Influence of blockage and upstream disturbances on the performance of a vortex flowmeter with a trapezoidal bluff body,Measurement: Journal of the International Measurement Confederation,43,4,2010,603.

Walimbe N.S., Narayankhedkar K.G., Atrey M.D.,Experimental investigation on mixed refrigerant Joule-Thomson cryocooler with flammable and non-flammable refrigerant mixtures,Cryogenics,50,10,2010,653.

Wang S., Thynell S.T., Chowdhury A.,Experimental study on hypergolic interaction between N,N,N′,N′ -tetramethylethylenediamine and nitric acid,Energy and Fuels,24,10,2010,5320.

Achenbach J.D., Cohen M.L., Kulkarni S.S.,Probabilistic considerations are essential to qnde and shm,Structural Health Monitoring 2009: From System Integration to Autonomous Systems - Proceedings of the 7th International Workshop on Structural Health Monitoring, IWSHM 2009,1,,2009,481.

Agrawal A., Djenidi L., Agrawal A.,Simulation of gas flow in microchannels with a single 90 ° bend,Computers and Fluids,38,8,2009,1629.

Alankar A., Mastorakos I.N., Field D.P.,A dislocation-density-based 3D crystal plasticity model for pure aluminum,Acta Materialia,57,19,2009,5936.

Anand R.K., Boersma B.J., Agrawal A.,Detection of turbulent/non-turbulent interface for an axisymmetric turbulent jet: Evaluation of known criteria and proposal of a new criterion,Experiments in Fluids,47,6,2009,995.

Andhare A.B., Manik D.N.,Experimental results on the use of high frequency resonance technique for tapered roller bearing diagnostics,Advances in Vibration Engineering,8,4,2009,329.

Andhare, A.B., Manik, D.N.,Experimental results on the use of high frequency resonance technique for tapered roller bearing diagnostics,Advances in Vibration Engineering,8,4,2009,329.

Arora A., Zhang Z., De A., DebRoy T.,Strains and strain rates during friction stir welding,Scripta Materialia,61,9,2009,863.

Arora S., Lim C.S., Foo J.Y., Sakharkar M.K., Dixit P., Liu A.Q., Miao J.-M.,Microchip system for monitoring microbial physiological behaviour under drug influences,Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine,223,6,2009,777.

Arora S., Lim C.S., Kakran M., Foo J.Y.A., Sakharkar M.K., Dixit P., Miao J.,Investigating Combinatorial Drug Effects on Adhesion and Suspension Cell Types Using a Microfluidic-Based Sensor System,IFMBE Proceedings,23,,2009,817.

Arul A.J., Iyer N.K., Velusamy K.,Adjoint operator approach to functional reliability analysis of passive fluid dynamical systems,Reliability Engineering and System Safety,94,12,2009,1917.

Bag S., De A., Debroy T.,A genetic algorithm-assisted inverse convective heat transfer model for tailoring weld geometry,Materials and Manufacturing Processes,24,3,2009,384.

Bag S., De A.,Development of efficient numerical heat transfer model coupled with genetic algorithm based optimisation for prediction of process variables in GTA spot welding,Science and Technology of Welding and Joining,14,4,2009,333.

Bag S., De A.,Error analysis of forward and reverse heat conduction and convection calculations considering uncertainties in welding,Science and Technology of Welding and Joining,14,7,2009,662.

Bag S., Trivedi A., De A.,Development of a finite element based heat transfer model for conduction mode laser spot welding process using an adaptive volumetric heat source,International Journal of Thermal Sciences,48,10,2009,1923.

Balakumar B.J., Prestridge K.P., Orlicz G., Balasubramanian S., Tomkins C.,High resolution experimental measurements of richtmyer-meshkov turbulence in fluid layers after reshock using simultaneous PIV-PLIF,AIP Conference Proceedings,1195,,2009,659.

Bandyopadhyay B., Gandhi P.S., Kurode S.,Sliding mode observer based sliding mode controller for slosh-free motion through PID scheme,IEEE Transactions on Industrial Electronics,56,9,2009,3432.

Bandyopadhyay B., Kurode S., Gandhi P.S.,Sliding mode control for slosh-free motion-A class of underactuated system,International Journal of Advanced Mechatronic Systems,1,3,2009,203.

Bhandakkar T.K., Chason E., Gao H.,Formation of crack-like diffusion wedges and compressive stress evolution during thin film growth with inhomogeneous grain boundary diffusivity,International Journal of Applied Mechanics,1,1,2009,1.

Bhandakkar T.K., Wei Y., Gao H.,Transient stress concentration in diffusional creep of a thin foil with heterogeneous grain boundary diffusivity,Mathematics and Mechanics of Solids,14,43132,2009,179.

Bharadwaj P., Khondge A.D., Date A.W.,Heat transfer and pressure drop in a spirally grooved tube with twisted tape insert,International Journal of Heat and Mass Transfer,52,43319,2009,1938.

Bhardwaj, Rajneesh; Fang, Xiaohua; Attinger, Daniel;,Pattern formation during the evaporation of a colloidal nanoliter drop: a numerical and experimental study,New Journal of Physics,11,7,2009,75020.

Bhattacharya A., Berk Usta O., Yashin V.V., Balazs A.C.,Self-sustained motion of a train of haptotactic microcapsules,Langmuir,25,17,2009,9644.

Bhide R.R., Singh S.G., Sridharan A., Duttagupta S.P., Agrawal A.,Pressure drop and heat transfer characteristics of boiling water in sub-hundred micron channel,Experimental Thermal and Fluid Science,33,6,2009,963.

Bopche S.B., Sridharan A.,Determination of view factors by contour integral technique,Annals of Nuclear Energy,36,43445,2009,1681.

Chandy A.J., Frankel S.H.,Regularization-based sub-grid scale (SGS) models for large eddy simulations (LES) of high-Re decaying isotropic turbulence,Journal of Turbulence,10,,2009,1.

Chandy A.J., Frankel S.H.,The t-model as a large eddy simulation model for the navier-stokes equations,Multiscale Modeling and Simulation,8,2,2009,445.

Chandy A.J., Glaze D.J., Frankel S.H.,A Hybrid Large Eddy simulation/filtered mass density function for the calculation of strongly radiating turbulent flames,Journal of Heat Transfer,131,5,2009,1.

Chasiotis I., Jonnalagadda K.N.,Strength and fracture resistance of amorphous diamond-like carbon films for MEMS,Journal of Nanomaterials,2009,,2009,.

Chaudhari M., Verma G., Puranik B., Agrawal A.,Frequency response of a synthetic jet cavity,Experimental Thermal and Fluid Science,33,3,2009,439.

Chavan, V.M., Maiti, S.K., Dutta, B.K.,Forced vibration analysis in the context of Dynamic SIFs in impact bending tests,International Journal of Fracture,160,1,2009,85.

Chowdhury A., Bapat C., Thynell S.T.,Apparatus for probing preignition behavior of hypergolic materials,Review of Scientific Instruments,80,4,2009,.

Chowdhury A., Thynell S.T., Lin P.,Confined rapid thermolysis/FTIR/ToF studies of tetrazolium-based energetic ionic liquids,Thermochimica Acta,485,43132,2009,1.

Chowdhury A., Thynell S.T., Wang S.,Ignition behavior of novel hypergolic materials,45th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit,,,2009,.

Dabade U.A., Dapkekar D., Joshi S.S.,Modeling of chip-tool interface friction to predict cutting forces in machining of Al/SiCp composites,International Journal of Machine Tools and Manufacture,49,9,2009,690.

Dabade U.A., Joshi S.S.,Analysis of chip formation mechanism in machining of Al/SiCp metal matrix composites,Journal of Materials Processing Technology,209,10,2009,4704.

Demsis A., Verma B., Prabhu S.V., Agrawal A.,Experimental determination of heat transfer coefficient in the slip regime and its anomalously low value,Physical Review E - Statistical, Nonlinear, and Soft Matter Physics,80,1,2009,.

Deshmukh P., Mitra S.K., Gaitonde U.N.,Study of natural convection in volumetrically heated enclosures for different aspect ratios and Prandtl numbers,Proceedings of the ASME Summer Heat Transfer Conference 2009, HT2009,2,,2009,11.

Deshmukh S., Gandhi P.S.,Optomechanical scanning systems for microstereolithography (MSL): Analysis and experimental verification,Journal of Materials Processing Technology,209,3,2009,1275.

Dhuri K.D., Seshu P.,Multi-objective optimization of piezo actuator placement and sizing using genetic algorithm,Journal of Sound and Vibration,323,43223,2009,495.

Djenidi L., Agrawal A., Antonia R.A.,Anisotropy measurements in the boundary layer over a flat plate with suction,Experimental Thermal and Fluid Science,33,7,2009,1106.

Fu, Y., Mote, R.G., Wang, Q., Zhou, W.,Experimental study of plasmonic structures with variant periods for sub-wavelength focusing: Analyses of characterization errors,Journal of Modern Optics,56,14,2009,1550.

Gada V.H., Sharma A.,On derivation and physical interpretation of level set method-based equations for two-phase flow simulations,Numerical Heat Transfer, Part B: Fundamentals,56,4,2009,307.

Gaikwad A.J., Vijayan P.K., Iyer K., Bhartiya S., Kumar R., Lele H.G., Ghosh A.K., Kushwaha H.S., Sinha R.K.,Effect of loop configuration on steam drum level control for a multiple drum interconnected loops pressure tube type boiling water reactor,IEEE Transactions on Nuclear Science,56,6,2009,3712.

Gandhi P.S., Joshi K.B., Ananthkrishnan N.,Design and development of a novel 2DOF actuation slosh rig,Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME,131,1,2009,1.

Gandhi P.S.,Active stabilization of lateral and rotary slosh in cylindrical tanks,Proceedings of the IEEE International Conference on Industrial Technology,,,2009,4939702.

Ghosh P., Kamoji M.A., Date A.W., Prabhu S.V.,Experimental investigations on sail type wind-turbines,Wind Engineering,33,4,2009,349.

Guha A., Amarnath C., Kurien Issac K., Talukdar M.K., Joshi S.,Linkage Driven Dobby with Dwell,Textile Research Journal,79,9,2009,804.

Hashimoto F., Melkote S.N., Singh R., Kalil R.,Effect of finishing methods on surface characteristics and performance of precision components in rolling-sliding contact,International Journal of Machining and Machinability of Materials,6,43132,2009,3.

Hernon, D., Salamon, T., Kempers, R., Krishnan, S., Lyons, A., Hodes, M., Kolodner, P., Mullins, J., McGarry, L.,Thermal management: Enabling enhanced functionality and reduced carbon footprint,Bell Labs Technical Journal,14,3,2009,.

Jadhav, D.N., Jayaraju, N., Maiti, S.K.,On mixed mode stable crack growth through AISI 4340 steel and 2024 T3 aluminum alloy in terms of CTOD/CTOA,12th International Conference on Fracture 2009, ICF-12,6,,2009,4299.

Jagan Reddy G., Srinivasan N., Gokhale A.A., Kashyap B.P.,Processing map for hot working of spray formed and hot isostatically pressed Al-Li alloy (UL40),Journal of Materials Processing Technology,209,18-19,2009,5964.

Jaya Raju, N., Maiti, S.K.,Characterization of mode I stable crack growth through SA333 Gr6 steels in terms of CTOD/CTOA and its transferability to through-the-thickness circumferential crack growth through pipes,12th International Conference on Fracture 2009, ICF-12,6,,2009,4289.

Joglekar M.M., Pawaskar D.N.,Pull-in dynamics of variable-width electrostatic microactuators,2008 Proceedings of the 9th Biennial Conference on Engineering Systems Design and Analysis,4,,2009,327.

Joshi M., Singh R.K., Joshi S.S., Balasubramaniam R., Suri V.K.,Preliminary investigation of hydrodynamic nanopolishing of flat steel plates,International Conferences on Multi-Material Micro Manufacture, 4M/International Conferences on Micro Manufacturing, ICOMM,,,2009,287.

Joshi S.N., Pande S.S.,Development of an intelligent process model for EDM,International Journal of Advanced Manufacturing Technology,45,43193,2009,300.

Karagadde, Shyamprasad; Sundarraj, Suresh; Dutta, Pradip;,Modeling growth of hydrogen bubbles in aluminum castings using the level-set method,Scripta Materialia,61,2,2009,216-219.

Karande S., Nataraj P.S.V., Gandhi P.S., Deshpande M.M.,Control of parallel flexible five bar manipulator using QFT,Proceedings of the IEEE International Conference on Industrial Technology,,,2009,4939693.

Karanjgaokar N., Chasiotis I., Peroulis D., Jonnalagadda K.,Strain rate and creep response of Au and Ni thin films,Society for Experimental Mechanics - SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2009,4,,2009,2373.

Karthikeyan T., Thomas Paul V., Mishra S.K., Saroja S., Vijayalakshmi M., Samajdar I.,Effect of thermomechanical treatment on the grain boundary character distribution in a 9Cr-1Mo ferritic steel,Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science,40,9,2009,2030.

Kartik V., Eleftheriou E.,Friction-induced dynamics of axially-moving media in contact with an actively-positioned surface,ASME International Mechanical Engineering Congress and Exposition, Proceedings,11,,2009,439.

Karunakaran K.P., Suryakumar S., Pushpa V., Akula S.,Retrofitment of a CNC machine for hybrid layered manufacturing,International Journal of Advanced Manufacturing Technology,45,43319,2009,690.

Kim Y.Y., Kulkarni S.S., Krishnaswamy S.,Regularization of pattern formation in heteroepitaxial thin films through surface diffusivity modulation,Applied Physics Letters,94,8,2009,.

Kore S.D., Date P.P., Kulkarni S.V., Kumar S., Kulkarni M.R., Desai S.V., Rajawat R.K., Nagesh K.V., Chakravarty D.P.,Electromagnetic impact welding of Al-to-Al-Li sheets,Journal of Manufacturing Science and Engineering, Transactions of the ASME,131,3,2009,345021.

Kumar V., Kapoor S., Arora G., Saha S.K., Dutta P.,A combined CFD and flow network modeling approach for vehicle underhood air flow and thermal analysis,SAE Technical Papers,,,2009,.

Kumbhakarna N., Chowdhury A., Thynell S.T.,Modeling of RDX/TAGzT propellant combustion with detailed chemical kinetics,45th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit,,,2009,.

Kurode S., Bandyopadhyay B., Gandhi P.S.,Sliding mode observer for estimation of slosh states in a moving container,Proceedings of the IEEE International Conference on Industrial Technology,,,2009,4939649.

Lakshmanan S.P., Pandey M., Pradeep Kumar P., Iyer K.N.,Study of startup transients and power ramping of natural circulation boiling systems,Nuclear Engineering and Design,239,6,2009,1076.

Lin N., Wang H., Dixit P., Xu T., Zhang S., Miao J.,Investigation of carbon nanotube growth on multimetal layers for advanced interconnect applications in microelectronic devices,Journal of the Electrochemical Society,156,3,2009,K23.

Lyons, A., Krishnan, S., Mullins, J., Hodes, M., Hernon, D.,Advanced heat sinks enabled by three-dimensional printing,20th Annual International Solid Freeform Fabrication Symposium, SFF 2009,,,2009,.

Manik D.N.,Noise generation due to impulse excitation,16th International Congress on Sound and Vibration 2009, ICSV 2009,4,,2009,2274.

Manik, D.N.,Noise generation due to impulse excitation,16th International Congress on Sound and Vibration 2009, ICSV 2009,4,,2009,2274.

Mastud S.A., Singh R.K., Joshi S.S.,Investigation of reverse micro-EDM process for generating high aspect ratio micro-electrode arrays,International Conferences on Multi-Material Micro Manufacture, 4M/International Conferences on Micro Manufacturing, ICOMM,,,2009,153.

Mishra S.K., Desai S.G., Pant P., Narasimhan K., Samajdar I.,Improved predictability of forming limit curves through microstructural inputs,International Journal of Material Forming,2,1,2009,59.

Mishra S.K., Pant P., Narasimhan K., Rollett A.D., Samajdar I.,On the widths of orientation gradient zones adjacent to grain boundaries,Scripta Materialia,61,3,2009,273.

Moser R.D., Malaya N.P., Chang H., Zandonade P.S., Vedula P., Bhattacharya A., Haselbacher A.,Theoretically based optimal large-eddy simulation,Physics of Fluids,21,10,2009,105104.

Mote, R.G., Yu, S.F., Zhou, W., Li, X.F.,Design and analysis of two-dimensional high-index-contrast grating surface-emitting lasers,Optics Express,17,1,2009,260.

Mote, R.G., Yu, S.F., Zhou, W., Li, X.F.,Subwavelength focusing behavior of high numerical-aperture phase Fresnel zone plates under various polarization states,Applied Physics Letters,95,19,2009,.

Nagahanumaiah, Ravi B.,Effects of injection molding parameters on shrinkage and weight of plastic part - Produced by DMLS mold,Rapid Prototyping Journal,15,3,2009,179.

Naik, S.S., Maiti, S.K.,Triply coupled bending-torsion vibration of Timoshenko and Euler-Bernoulli shaft beams with arbitrarily oriented open crack,Journal of Sound and Vibration,324,43223,2009,1067.

Nair P., Jayachandran T., Puranik B., Bhandarkar U.V.,Simulation of thermo-fluid interactions in cryogenic stage tnrbine startup system using AUSM+-UP-based higher-order accurate flow solver,Defence Science Journal,59,3,2009,215.

Nair P., Jayachandran T., Puranik B.C., Bhandarkar V.U.,Development of a higher-order accurate reconstruction scheme with reduced least square matrix for convective and diffusive flux evaluation,International Journal of Computational Methods,6,3,2009,425.

Nair, P., Jayachandran, T., Puranik, B., Bhandarkar, U.V.,Simulation of thermo-fluid interactions in cryogenic stage tnrbine startup system using AUSM+-UP-based higher-order accurate flow solver,Defence Science Journal,59,3,2009,215.

Nair, P., Jayachandran, T., Puranik, B.C., Bhandarkar, V.U.,Development of a higher-order accurate reconstruction scheme with reduced least square matrix for convective and diffusive flux evaluation,International Journal of Computational Methods,6,3,2009,425.

Nandan R., DebRoy T., Prabu B., De A.,Tailoring friction stir welds of aluminum alloys using a differential evolution and a transport phenomena based model,ASM Proceedings of the International Conference: Trends in Welding Research,,,2009,542.

Nandi K., Date A.W.,Formulation of fully implicit method for simulation of flows with interfaces using primitive variables,International Journal of Heat and Mass Transfer,52,13-14,2009,3217.

Nandi K., Date A.W.,Fully implicit method for simulation of flows with interfaces,Progress in Computational Fluid Dynamics,9,43223,2009,158.

Nandi K., Date A.W.,Validation of fully implicit method for simulation of flows with interfaces using primitive variables,International Journal of Heat and Mass Transfer,52,13-14,2009,3225.

Narasimhan, R., Subramanya, H.Y., Patil, S.D., Tandaiya, P., Ramamurty, U.,Stationary crack tip fields in elastic-plastic solids: An overview of recent numerical simulations,Journal of Physics D: Applied Physics,42,21,2009,.

Neela V., De A.,Three-dimensional heat transfer analysis of LENSTM process using finite element method,International Journal of Advanced Manufacturing Technology,45,43382,2009,935.

P. Tandaiya, U. Ramamurty and R. Narasimhan, Mixed mode (I and II) crack tip fields in bulk metallic glasses, Journal of the Mechanics and Physics of Solids, 57,11,2009,10.1016/j.jmps.2009.07.006,1880

Paramane S.B., Sharma A.,Numerical investigation of heat and fluid flow across a rotating circular cylinder maintained at constant temperature in 2-D laminar flow regime,International Journal of Heat and Mass Transfer,52,13-14,2009,3205.

Pathak K.A., Chandy A.J.,Laser ablated carbon plume flow dynamics under magnetic field,Journal of Applied Physics,105,8,2009,.

Pawade R.S., Sonawane H.A., Joshi S.S.,An analytical model to predict specific shear energy in high-speed turning of Inconel 718,International Journal of Machine Tools and Manufacture,49,41609,2009,979.

R. Narasimhan, H. Y. Subramanya, S. D. Patil, P. Tandaiya and U. Ramamurty, Stationary crack tip fields in elastic-plastic solids: An overview of recent numerical simulations, Journal of Physics D: Applied Physics,42,20,2009,10.1088/0022-3727/42/21/214005,214005

Rajendran R., Prem Sai K., Chandrasekar B., Gokhale A., Basu S.,Impact energy absorption of aluminium foam fitted AISI 304L stainless steel tube,Materials and Design,30,5,2009,1777.

Rajinikumar R., Süßer M., Narayankhedkar K.G., Krieg G., Atrey M.D.,Design parameter evaluation of a metal recoated Fiber Bragg Grating sensors for measurement of cryogenic temperature or stress in superconducting devices,Cryogenics,49,5,2009,202.

Rane M V, Meena P M “Evacuated Glass Tube Solar Air Heater - Low Cost Light Weight Design@, International Conference on Advances in Energy Research, ICAER 2009, Dec 12 to 14, 2009, Mumbai, INDIA.

Rane M V, Padiya Y S,”Benefits of Heat Pump Assisted Freeze Desalination Systems"@, International Conference on Advances in Energy Research, ICAER 2009, Dec 12 to 14, 2009, Mumbai, INDIA.

Rane M V, Taferi S T “Solar Refrigerator cum Water Heater@, International Conference on Advances in Energy Research, ICAER 2009, Dec 12 to 14, 2009, Mumbai INDIA.

Rane M V, “Energy and Water Conservation in Air Conditioning and Refrigeration Systems”, Plumbing Symposium at Plumbex India’09, Jan 2009, Mumbai, INDIA.

Rane M V, “Energy Efficient Air Conditioning and Refrigeration Systems”, BCCI Conference on Energy Efficiency Capacity Building Strategies, Jan 2009, Mumbai, INDIA.

Rane M V, “Green Technologies Related to Refrigeration and Air Conditioning”, International Conference on Science,Technology and Economy for Emerging and Developing Countries, Oct 2009, Mumbai, INDIA.

S.K. Agrawal, V.N. Dubey, J. Gangloff, E. Brackbill, and V. Sangwan, “Design and Optimization of a Cable Driven Upper Arm Exoskeleton,” ASME Journal of Medical Devices, vol. 3, no. 3, 031004(10pages), 2009.

S.K. Agrawal, V.N. Dubey, J.J. Gangloff, E.B. Brackbill, and V. Sangwan, “Optimization and Design of a Cable Driven Upper Arm Exoskeleton,” Proceedings of ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2009.

Samal M.K., Seshu P.,Analytical solution in 2D domain for nonlinear response of piezoelectric slabs under weak electric fields,Communications in Nonlinear Science and Numerical Simulation,14,6,2009,2817.

Samal M.K., Seshu P.,On the non-linear response of piezoelectric slabs under weak electric fields: Experimental and analytical modelling,Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science,223,6,2009,1493.

Saxena I., Agrawal A., Joshi S.S.,Fabrication of microfilters using excimer laser micromachining and testing of pressure drop,Journal of Micromechanics and Microengineering,19,2,2009,.

Sewatkar C.M., Sharma A., Agrawal A.,On the effect of Reynolds number for flow around a row of square cylinders,Physics of Fluids,21,8,2009,.

Sewatkar C.M., Sharma A., Agrawal A.,On the effect of Reynolds number for flow around a row of square cylinders,Physics of Fluids,21,8,2009,83602.

Shukla R., Gandhi P., Rajan K.K., Lim L.-C.,Property matrices of [001]-poled Pb(Zn1/3Nb2/3)O 3-(6-7)%PbTiO3 single crystals of [110]-length cut: A modified approach,Japanese Journal of Applied Physics,48,8 Part 1,2009,814061.

Shukla R., Lim L.C., Gandhi P.,Piezoelectric single crystal power generator for low frequency vibrating machines and structures,IEEE International Symposium on Applications of Ferroelectrics,,,2009,5307554.

Shukla R., Rajan K.K., Gandhi P., Lim L.-C.,Erratum: Complete sets of elastic, dielectric and piezoelectric properties of [001]-poled Pb (Zn1/3 Nb2/3) O3 -(6-7)% PbTiO3 single crystals of [110]-length cut (Applied Physics Letters (2008) 92 (212907)),Applied Physics Letters,94,13,2009,139901.

Singh H., Gokhale A., Mao Y., Tewari A.,Reconstruction, visualization, and quantitative characterization of multi-phase three-dimensional microstructures of cast aluminum alloys,Shape Casting: 3rd International Symposium 2009,,,2009,141.

Singh H., Gokhale A.M., Mao Y., Tewari A., Sachdev A.K.,Reconstruction and quantitative characterization of multiphase, multiscale three-dimensional microstructure of a cast Al-Si base alloy,Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science,40,6,2009,859.

Singh H., Gokhale A.M., Mao Y., Tewari A., Sachdev A.K.,Three-dimensional visualization and characterization of morphology and internal microstructural features of primary silicon crystals in a cast Al-Si base alloy,Journal of Crystal Growth,311,19,2009,4454.

Singh H., Gokhale A.M., Tewari A., Zhang S., Mao Y.,Three-dimensional visualization and quantitative characterization of primary silicon particles in an Al-Si base alloy,Scripta Materialia,61,4,2009,441.

Singh R., Melkote S.N.,Force modeling in laser-assisted microgrooving including the effect of machine deflection,Journal of Manufacturing Science and Engineering, Transactions of the ASME,131,1,2009,110131.

Singh S.G., Bhide R.R., Duttagupta S.P., Puranik B.P., Agrawal A.,Two-phase flow pressure drop characteristics in trapezoidal silicon microchannels,IEEE Transactions on Components and Packaging Technologies,32,4,2009,887.

Singh S.G., Duttagupta S.P., Agrawal A.,In situ impact analysis of very high heat flux transients on nonlinear p-n diode characteristics and mitigation using on-chip single-and two-phase microfluidics,Journal of Microelectromechanical Systems,18,6,2009,1208.

Singh S.G., Jain A., Sridharan A., Duttagupta S.P., Agrawal A.,Flow map and measurement of void fraction and heat transfer coefficient using an image analysis technique for flow boiling of water in a silicon microchannel,Journal of Micromechanics and Microengineering,19,7,2009,.

Singh S.G., Jain A., Sridharan A., Duttagupta S.P., Agrawal A.,Flow map and measurement of void fraction and heat transfer coefficient using an image analysis technique for flow boiling of water in a silicon microchannel,Journal of Micromechanics and Microengineering,19,7,2009,75004.

SriHarsha, V., Prabhu, S.V., Vedula, R.P.,Influence of rib height on the local heat transfer distribution and pressure drop in a square channel with 90° continuous and 60° V-broken ribs,Applied Thermal Engineering,29,43445,2009,2444.

Subburaj K., Ravi B., Agarwal M.,Automated identification of anatomical landmarks on 3D bone models reconstructed from CT scan images,Computerized Medical Imaging and Graphics,33,5,2009,359.

Subburaj K., Ravi B., Agarwal M.G.,Automated 3D geometric reasoning in computer assisted joint reconstructive surgery,2009 IEEE International Conference on Automation Science and Engineering, CASE 2009,,,2009,367.

Subburaj K., Ravi B., Agarwal M.G.,Computerized Assessment of Excessive Femoral and Tibial Torsional Deformation by 3D Anatomical Landmarks Referencing,IFMBE Proceedings,23,,2009,129.

Subburaj K., Ravi B., Agarwal M.G.,Tumour Knee Replacement Planning in a 3D Graphics System,IFMBE Proceedings,23,,2009,906.