Raj Desai, Anirban Guha, P Seshu, An appropriate biomechanical model of seated human subjects exposed to whole-body vibration, Raj Desai, Anirban Guha, P Seshu, Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 2021, 235(4):586-601., An appropriate biomechanical model of seated human subjects exposed to whole-body vibration,, , , 2021, ,

Raj Desai, Anirban Guha, P Seshu, A comparison of different models of passive seat suspensions, Raj Desai, Anirban Guha, P Seshu, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile engineering, 235 (9), 2021, pp. 2585-2604., A comparison of different models of passive seat suspensions, , , 2021, ,

Raj Desai, Anirban Guha, P Seshu, Modelling and simulation of active and passive seat suspensions for vibration attenuation of vehicle occupants, Raj Desai, Anirban Guha, P Seshu, International Journal of Dynamics and Control, 2021, v9, pp. 1423-1443, Modelling and simulation of active and passive seat suspensions for vibration attenuation of vehicle occupants, , , 2021, ,

Vikas Prasad, Dnyanesh N Pawaskar, Pasumarthy Seshu, Controller design and multi-objective optimization of heavy goods vehicle suspension system by geometry-inspired GA, Vikas Prasad, Dnyanesh N Pawaskar, Pasumarthy Seshu, Structural and Multidisciplinary Optimization, 2021, v9, 983-1001., Controller design and multi-objective optimization of heavy goods vehicle suspension system by geometry-inspired GA, , , 2021, ,

Raj Desai, Anirban Guha, P Seshu, A comparison of quarter, half and full car models for predicting vibration attenuation of an occupant in a vehicle, Raj Desai, Anirban Guha, P Seshu, Journal of Vibration Engineering & Technologies, 2021, pp. 1-19., A comparison of quarter, half and full car models for predicting vibration attenuation of an occupant in a vehicle, , , 2021, ,

Raj Desai, Anirban Guha, P Seshu, Modelling and simulation of an integrated human-vehicle system with non-linear cushion contact force, Raj Desai, Anirban Guha, P Seshu, Simulation Modelling Practice and Theory: Elsevier, 106 (2021), 102206., Modelling and simulation of an integrated human-vehicle system with non-linear cushion contact force, , , 2021, ,

Raj Desai, Anirban Guha and P. Seshu, Multibody Modelling of the Human Body for Vibration Induced Direct and Cross-axis Seat to Head Transmissibility, Raj Desai, Anirban Guha and P. Seshu, Proc. of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2021, 235(17):3146-3161., Multibody Modelling of the Human Body for Vibration Induced Direct and Cross-axis Seat to Head Transmissibility, , , 2021, ,

Malik P.K., Rajput R., Guha A., Seshu P.,Motion Synthesis in Tensegrity Mechanisms,2018 International Conference on Reconfigurable Mechanisms and Robots, ReMAR 2018 - Proceedings,,,2018,.

Desai R., Guha A., Seshu P.,Multibody Biomechanical Modelling of Human Body Response to Direct and Cross Axis Vibration,Procedia Computer Science,133,,2018,494.

Raj Desai, Anirban Guha, P Seshu, Multibody Biomechanical Modelling of Human Body Response to Direct and Cross Axis Vibration, Raj Desai, Anirban Guha and P. Seshu, Procedia Computer Science, 2018, 133, pp. 494-501., Multibody Biomechanical Modelling of Human Body Response to Direct and Cross Axis Vibration, , , 2018, ,

Dureja A.K., Sinha R.K., Pawaskar D.N., Seshu P.,Thermomechanical behavior of coolant channel assembly in heavy water reactor under severe plant condition,Journal of Nuclear Engineering and Radiation Science,3,2,2017,.

Dureja, A.K., Seshu, P., Pawaskar, D.N., Sinha, R.K., Thermomechanical Behavior of Coolant Channel Assembly in Heavy Water Reactor Under Severe Plant Condition, Dureja, A.K., Seshu, P., Pawaskar, D.N., Sinha, R.K., ASME Journal of Nuclear Engineering and Radiation Science, April 2017., ASME Journal of Nuclear Engineering and Radiation Science, , , 2017, ,

Dureja A.K., Pawaskar D.N., Seshu P., Sinha S.K., Sinha R.K.,Experimental determination of thermal contact conductance between pressure and calandria tubes of Indian pressurised heavy water reactors,Nuclear Engineering and Design,284,,2015,60.

Mody M., Guha A., Seshu P.,A simple strategy for tyre force distribution to improve the performance of a four wheel independent steer-by-wire vehicle,2015 IFToMM World Congress Proceedings, IFToMM 2015,,,2015,.

Dureja A.K., Sinha S.K., Pawaskar D.N., Seshu P., Chakravartty J.K., Sinha R.K.,Modelling flow and work hardening behaviour of cold worked Zr-2.5Nb pressure tube material in the temperature range of 30-600 ÌŠC,Nuclear Engineering and Design,269,,2014,52.

Pable M.J., Seshu P.,Design of 'road friendly' suspensions for quarter and half heavy goods vehicle models by using genetic algorithm and a multi-objective performance index,International Journal of Vehicle Systems Modelling and Testing,7,1,2012,26.

Dureja A.K., Sinha S.K., Srivastava A., Sinha R.K., Chakravartty J.K., Seshu P., Pawaskar D.N.,Flow behaviour of autoclaved, 20% cold worked, Zr-2.5Nb alloy pressure tube material in the temperature range of room temperature to 800 °c,Journal of Nuclear Materials,412,1,2011,22.

Pable M.J., Seshu P.,Optimization of passive suspensions to mimic active suspensions,Advances in Vibration Engineering,9,2,2010,131.

Dhuri K.D., Seshu P.,Multi-objective optimization of piezo actuator placement and sizing using genetic algorithm,Journal of Sound and Vibration,323,43223,2009,495.

Samal M.K., Seshu P.,On the non-linear response of piezoelectric slabs under weak electric fields: Experimental and analytical modelling,Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science,223,6,2009,1493.

Samal M.K., Seshu P.,Analytical solution in 2D domain for nonlinear response of piezoelectric slabs under weak electric fields,Communications in Nonlinear Science and Numerical Simulation,14,6,2009,2817.

Samal M.K., Seshu P., von Wagner U., Hagedorn P., Dutta B.K., Kushwaha H.S.,A mathematical model in three-dimensional piezoelectric continuum to predict non-linear responses of piezoceramic materials,Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science,222,11,2008,2251.

Dhuri K.D., Seshu P.,Favorable locations for piezo actuators in plates with good control effectiveness and minimal change in system dynamics,Smart Materials and Structures,16,6,2007,2526.

Sayyad A., Seth B., Seshu P.,Single-legged hopping robotics research - A review,Robotica,25,5,2007,587.

Samal M.K., Seshu P., Dutta B.K.,An analytical formulation in 3D domain for the nonlinear response of piezoelectric slabs under weak electric fields,International Journal of Solids and Structures,44,14-15,2007,4656.

Seth B., Seshu P., Shanmuganathan P.V., Vichare V.V., Raj P.,Search for initial conditions for sustained hopping of passive springy-leg offset-mass hopping robot,Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME,129,4,2007,522.

Seshu P., Dhuri K.D.,Corrected formulas for natural frequencies of cantilever beams under uniform axial tension,AIAA Journal,45,6,2007,1435.

Samal M.K., Seshu P., Dutta B.K.,Modeling and application of piezoelectric materials in smart structures,International Journal of COMADEM,10,2,2007,30.

Amarnath C., Issac K.K., Seth B., Seshu P., Kharade A., Pathak S.K., Deshmukh V.,Development of a hexapod walking robot - Mechanical design,Journal of the Institution of Engineers (India), Part PR: Production Engineering Division,87,MAR.,2007,20.

Gupta V.K., Seshu P., Kurien Issac K., Shevgaonkar R.K.,Optimal steering of a paraboloid antenna using piezoelectric actuators,Smart Materials and Structures,16,1,2007,67.

Dhuri K.D., Seshu P.,Piezo actuator placement and sizing for good control effectiveness and minimal change in original system dynamics,Smart Materials and Structures,15,6,2006,1661.

Seshu P., Seth B., Shanmuganathan V.,Passive dynamics of kangaroo-like hopping robot,Journal of the Institution of Engineers (India), Part PR: Production Engineering Division,87,SEPT.,2006,39.

Samal M.K., Seshu P., Parashar S.K., Von Wagner U., Hagedorn P., Dutta B.K., Kushwaha H.S.,Nonlinear behaviour of piezoceramics under weak electric fields: Part-I: 3-D finite element formulation,International Journal of Solids and Structures,43,6,2006,1422.

Samal M.K., Seshu P., Parashar S.K., Von Wagner U., Hagedorn P., Dutta B.K., Kushwaha H.S.,Nonlinear behaviour of piezoceramics under weak electric fields. Part-II: Numerical results and validation with experiments,International Journal of Solids and Structures,43,6,2006,1437.

Langote P.K., Seshu P.,Experimental studies on active vibration control of a beam using hybrid active/passive constrained layer damping treatments,Journal of Vibration and Acoustics, Transactions of the ASME,127,5,2005,515.

Samal M.K., Seshu P., Parashar S., Von Wagner U., Hagedorn P., Dutta B.K., Kushwaha H.S.,A finite element model for nonlinear behaviour of piezoceramics under weak electric fields,Finite Elements in Analysis and Design,41,15,2005,1464.

Gupta V.K., Seshu P., Issac K.K., Shevgaonkar R.K.,Beam steering and shaping of smart cylindrical antenna,AIAA Journal,43,1,2005,165.

Gupta V.K., Seshu P., Issac K.K.,Finite element and experimental investigation of piezoelectric actuated smart shells,AIAA Journal,42,10,2004,2112.

Burla R.K., Seshu P., Hirani H., Sajanpawar P.R., Suresh H.S.,Three dimensional finite element analysis of crankshaft torsional vibrations using parametric modeling techniques,SAE Technical Papers,,,2003,.

Ghate A.A., Seshu P.,Active vibration control of a smart beam,Proceedings of SPIE - The International Society for Optical Engineering,5062,2,2002,605.

Gupta V.K., Seshu P., Issac K.K.,Degenerated shell finite element for smart structures,Proceedings of SPIE - The International Society for Optical Engineering,5062,1,2002,326.

Ganguli A., Jhawar S., Seshu P.,Shape control of curved beams using piezoelectric actuators,Proceedings of SPIE - The International Society for Optical Engineering,5062,1,2002,297.

Raghavan A., Seshu P., Gandhi P.S.,Hysteresis modelling in piezoceramic actuator systems,Proceedings of SPIE - The International Society for Optical Engineering,5062,2,2002,560.

Gupta V.K., Seshu P., Kurien Issac K.,Finite element and experimental studies on piezoelectric actuated curved beams,Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference,2,,2002,1230.

Thirupathi S.R., Seshu P., Naganathan N.G.,A finite-element static analysis of smart turbine blades,Smart Materials and Structures,6,5,1997,607.

Seshu P., Naganathan N.G.,Finite-element analysis of strain transfer in an induced strain actuator,Smart Materials and Structures,6,1,1997,76.

Seshu P.,Substructuring and component mode synthesis,Shock and Vibration,4,3,1997,199.

Subrahmanyan P.K., Seshu P.,Dynamics of a flexible five bar manipulator,Computers and Structures,63,2,1997,283.

Onders J.P., Seshu P., Naganathan N.G.,Taguchi optimization of strain transfer in an induced strain actuator,Smart Materials and Structures,5,3,1996,327.

Seshu P., Naganathan Nagi G.,Analysis of strain induced in piezoelectric actuated beams,Proceedings of SPIE - The International Society for Optical Engineering,2715,,1996,658.

Seshu P., Ramamurti V., Babu B.J.C.,Theoretical and experimental investigations on composite blades,Composite Structures,20,2,1992,63.

Ramamurti V., Seshu P.,On the principle of cyclic symmetry in machine dynamics,Communications in Applied Numerical Methods,6,4,1990,259.

Seshu P., Ramamurti V.,Comparative performance of isotropic and composite bladed disks,American Society of Mechanical Engineers, Design Engineering Division (Publication) DE,43178,pt 3,1989,187.

Seshu P., Ramamurti V.,Effect of fictitious rotational stiffness coefficient on natural frequencies,Journal of Sound and Vibration,133,1,1989,177.

Ramamurti V., Seshu P.,Dynamic analysis of a pressure vessel,Computers and Structures,29,1,1988,161.