Anandita S., Mote R.G., Singh R.,Surface generation via scallop overlap analysis during grinding,International Journal of Advanced Manufacturing Technology,,,2017,1.

Anandita S., Mote R.G., Singh R.,Stochastic analysis of microgrinding tool topography and its role in surface generation,Journal of Manufacturing Science and Engineering, Transactions of the ASME,139,12,2017,121013.

Jelia P.R., Agrawal A., Singh R.K., Joshi S.S.,Design of textured surfaces for super-hydrophobicity,Sadhana - Academy Proceedings in Engineering Sciences,42,11,2017,1915.

Tripathi S., Tabor R.F., Singh R., Bhattacharya A.,Characterization of interfacial waves and pressure drop in horizontal oil-water core-annular flows,Physics of Fluids,29,8,2017,82109.

Samanta A., Teli M., Singh R.,Experimental characterization and finite element modeling of the residual stresses in laser-assisted mechanical micromachining of Inconel 625,Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture,231,10,2017,1735.

Mittal R.K., Kulkarni S.S., Singh R.K.,Effect of lubrication on machining response and dynamic instability in high-speed micromilling of Ti-6Al-4V,Journal of Manufacturing Processes,28,,2017,413.

Yadav A.K., kumar M., Bajpai V., Singh N.K., Singh R.K.,FE modeling of burr size in high- speed micro-milling of Ti6Al4V,Precision Engineering,49,,2017,287.

Singh K.K., Kartik V., Singh R.,Modeling of Dynamic Instability Via Segmented Cutting Coefficients and Chatter Onset Detection in High-Speed Micromilling of Ti6Al4V,Journal of Manufacturing Science and Engineering, Transactions of the ASME,139,5,2017,51005.

Kumar P., Bajpai V., Singh R.,Burr height prediction of Ti6Al4V in high speed micro-milling by mathematical modeling,Manufacturing Letters,11,,2017,12.

Tripathi S., Bhattacharya A., Singh R., Tabor R.F.,Rheological behavior of high internal phase water-in-oil emulsions: Effects of droplet size, phase mass fractions, salt concentration and aging,Chemical Engineering Science,174,,2017,290.

Mittal R.K., Yadav S., Singh R.K.,Mechanistic Force and Burr Modeling in High-speed Microdrilling of Ti6Al4V,Procedia CIRP,58,,2017,329.

Soni G., Singh R., Yan W.,Modeling multiple damage mechanisms via a multi-fiber multi-layer representative volume element (M2RVE),9th Australasian Congress on Applied Mechanics, ACAM 2017,2017-November,,2017,.

Paul S., Vundru C., Singh R., Yan W.,Numerical analysis to determine critical height for multi layered laser cladding for die repair applications,9th Australasian Congress on Applied Mechanics, ACAM 2017,2017-November,,2017,.

Singh K.K., Kartik V., Singh R.,Component Mode Synthesis Approach for Micro End Mill Dynamics Considering Machine Tool Compliance,Procedia CIRP,58,,2017,469.

Shinde H., Mahajan P., Singh A.K., Singh R., Narasimhan K.,Process modeling and optimization of the staggered backward flow forming process of maraging steel via finite element simulations,International Journal of Advanced Manufacturing Technology,87,43317,2016,1851.

Bajpai V., Mahambare P., Singh R.K.,Effect of Thermal and Material Anisotropy of Pyrolytic Carbon in Vibration-Assisted Micro-EDM Process,Materials and Manufacturing Processes,31,14,2016,1879.

Paul S., Singh R., Yan W.,Thermal model for additive restoration of mold steels using crucible steel,Journal of Manufacturing Processes,24,,2016,346.

Parle D., Singh R.K., Joshi S.S.,Contribution of specific work of fracture to size effect in microcutting,Machining Science and Technology,20,4,2016,567.

Bajpai V., Prasad B., Singh R.,Fabrication and functional characterization of engineered features on pyrolytic carbon,Advances in Manufacturing,4,2,2016,134.

Keshav K., Alya S., Singh R.K., Gupta A.,Laser cladding for 3D deposition and Free-form repair,Proceedings of the IEEE International Conference on Industrial Technology,2016-May,,2016,898.

Parle D., Singh R.K., Joshi S.S.,Fracture energy evaluation using J-integral in orthogonal microcutting,Journal of Micro and Nano-Manufacturing,4,1,2016,11002.

Phapale K., Singh R., Patil S., Singh R.K.P.,Delamination Characterization and Comparative Assessment of Delamination Control Techniques in Abrasive Water Jet Drilling of CFRP,Procedia Manufacturing,5,,2016,521.

Phapale K., Patil S., Singh R., Singh R.K.P.,Comparative study of drilling induced delamination in CFRP with different ply orientation,Key Engineering Materials,705,,2016,227.

Singh K.K., Kartik V., Singh R.,Segmented cutting coefficient based chatter modeling for highspeed micromilling of Ti6Al4V,ASME 2016 11th International Manufacturing Science and Engineering Conference, MSEC 2016,2,,2016,.

Gupta N., Ahirrao S.B., Paul S., Singh R.K.,Erratum to: Modeling of micro-scale fiber laser hardening process and optimization via statistical approximation of the engineering models (International Journal of Precision Engineering and Manufacturing, 16, 11, (2015), 2281-2287),International Journal of Precision Engineering and Manufacturing,16,13,2015,2761.

Kattire P., Paul S., Singh R., Yan W.,Experimental characterization of laser cladding of CPM 9V on H13 tool steel for die repair applications,Journal of Manufacturing Processes,20,,2015,492.

Gupta N., Ahirrao S.B., Paul S., Singh R.K.,Modeling of micro-scale fiber laser hardening process and optimization via statistical approximation of the engineering models,International Journal of Precision Engineering and Manufacturing,16,11,2015,2281.

Singh K.K., Kartik V., Singh R.,Modeling dynamic stability in high-speed micromilling of Ti-6Al-4V via velocity and chip load dependent cutting coefficients,International Journal of Machine Tools and Manufacture,96,,2015,56.

Paul S., Gupta I., Singh R.K.,Characterization and modeling of microscale preplaced powder cladding via fiber laser,Journal of Manufacturing Science and Engineering, Transactions of the ASME,137,3,2015,31019.

Mastud S.A., Kothari N.S., Singh R.K., Joshi S.S.,Modeling debris motion in vibration assisted reverse micro electrical discharge machining process (R-MEDM),Journal of Microelectromechanical Systems,24,3,2015,661.

Seok J., Idaparapati S., Park H.W., Choi H.-J., Singh R.K., Jun M.,Special issue on environmentally conscious technologies in mechanical engineering,Advances in Mechanical Engineering,7,5,2015,1.

Singh R., Bajpai V.,Coolant and lubrication in machining,HandBook of Manufacturing Engineering and Technology,,,2015,981.

Tripathi S., Bhattacharya A., Singh R., Tabor R.F.,Lubricated Transport of Highly Viscous Non-Newtonian Fluid as Core-annular Flow: A CFD Study,Procedia IUTAM,15,,2015,278.

Singh K.K., Singh R., Kartik V.,Comparative Study of Chatter Detection Methods for High-Speed Micromilling of Ti6Al4V,Procedia Manufacturing,1,,2015,593.

Parle D., Singh R.K., Joshi S.S., Ravikumar G.V.V.,Modeling of microcrack formation in orthogonal machining,International Journal of Machine Tools and Manufacture,80-81,,2014,18.

Bajpai V., Singh R.K.,Finite element modeling of orthogonal micromachining of anisotropic pyrolytic carbon via damaged plasticity,Precision Engineering,38,2,2014,300.

Soni G., Singh R., Mitra M., Falzon B.G.,Modelling matrix damage and fibre-matrix interfacial decohesion in composite laminates via a multi-fibre multi-layer representative volume element (M2RVE),International Journal of Solids and Structures,51,2,2014,449.

Paul S., Ashraf K., Singh R.,Residual stress modeling of powder injection laser surface cladding for die repair applications,ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014 Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference,2,,2014,V002T02A092.

Mastud S.A., Kothari N.S., Singh R.K., Samuel J., Joshi S.S.,Analysis of debris motion in vibration assisted reverse micro electrical discharge machining,ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014 Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference,1,,2014,.

Soni G., Gupta S., Singh R., Mitra M., Yan W., Falzon B.G.,Study of localized damage in composite laminates using micro-macro approach,Composite Structures,113,1,2014,1.

Shinde H., Mahajan P., Singh R., Narasimhan K.,Three dimensional finite element analysis of staggered backward flow forming process,ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference, MSEC 2013,1,,2013,MSEC2013-1219.

Bajpai V., Kushwaha A.K., Singh R.K.,Burr formation and surface quality in high speed micromilling of titanium alloy (TI6AI4V),ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference, MSEC 2013,2,,2013,MSEC2013-1216.

Beeranur R., Waghmare K.K., Singh R.K.,Characterization of vacuum brazing of TI6AL4V and alumina with CU-AG brazing alloy via substrate-induced reactive mechanism,ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference, MSEC 2013,1,,2013,MSEC2013-1218.

Dongre G.G., Padwal P.S., Singh R.K., Joshi S.S.,Effect of silver coating on silicon ingot slicing by wire-EDM process,Transactions of the North American Manufacturing Research Institution of SME,41,,2013,75.

Soni G., Singh R., Mitra M.,Buckling behavior of composite laminates (with and without cutouts) subjected to nonuniform in-plane loads,International Journal of Structural Stability and Dynamics,13,8,2013,1350044.

Dongre G.G., Vesivkar C., Singh R., Joshi S.S.,Modeling of silicon ingot slicing process by wire-electrical discharge machining,Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture,227,11,2013,1664.

Singh G., Teli M., Samanta A., Singh R.,Finite element modeling of laser-assisted machining of AISI D2 tool steel,Materials and Manufacturing Processes,28,4,2013,443.

Bajpai V., Singh R.,Brittle damage and interlaminar decohesion in orthogonal micromachining of pyrolytic carbon,International Journal of Machine Tools and Manufacture,64,,2013,20.

Kumar P., More S., Singh R., Joshi S.S.,Experimental characterization of plane and conformal hydrodynamic polishing of machined single crystal sapphire,Manufacturing Letters,1,43192,2013,70.

Ba S., Jain N., Joseph V.R., Singh R.,Integrating analytical models with finite-element models: An application in micromachining,Journal of Quality Technology,45,2,2013,200.

Gupta S., Soni G., Singh R.,Micro-macro approach for predicting localized stress distribution in composites,ICCM International Conferences on Composite Materials,2013-July,,2013,8219.

Mastud S., Singh R.K., Joshi S.S.,Analysis of fabrication of arrayed micro-rods on tungsten carbide using reverse micro-EDM,International Journal of Manufacturing Technology and Management,26,43191,2012,176.

Dongre G., Singh R., Joshi S.S.,Response surface analysis of slicing of silicon ingots with focus on photovoltaic application,Machining Science and Technology,16,4,2012,624.

Mastud S., Garg M., Singh R., Samuel J., Joshi S.,Experimental characterization of vibration-assisted reverse micro Electrical Discharge Machining (EDM) for surface texturing,ASME 2012 International Manufacturing Science and Engineering Conference Collocated with the 40th North American Manufacturing Research Conference and in Participation with the Int. Conf., MSEC 2012,,,2012,439.

Mittal R., Singh R.K., Joshi S.S.,Elastohydrodynamic lubrication modeling of hydrodynamic nanopolishing process,Journal of Manufacturing Science and Engineering, Transactions of the ASME,134,4,2012,41001.

Dhamija L., Anilkumar G., Guha A., Singh R.K.,Kinematic analysis and design optimisation of a surgical rod cutter for shearing of Ti6Al4V rods,International Journal of Materials and Product Technology,43,43191,2012,22.

Joshi M., More S., Singh R.K., Joshi S.S., Balasubramaniam R., Suri V.K.,Experimental characterization of hydrodynamic nanopolishing of flat steel plates,Precision Engineering,36,3,2012,424.

Mastud S.A., Garg M., Singh R., Joshi S.S.,Recent developments in the reverse micro-electrical discharge machining in the fabrication of arrayed micro-features,Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science,226,2,2012,367.

Soni G., Singh R., Mitra M., Falzon B.,A multifibre multilayer representative volume element (M2RVE) for prediction of matrix and interfacial damage in composite laminates,ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials,,,2012,.

Bhandari R., Patil S., Singh R.K.,Surface prediction and control algorithms for anti-lock brake system,Transportation Research Part C: Emerging Technologies,21,1,2012,181.

Mastud S., Singh R.K., Samuel J., Joshi S.S.,Comparative analysis of the process mechanics in micro-electrical discharge machining (EDM) and reverse micro-EDM,ASME 2011 International Manufacturing Science and Engineering Conference, MSEC 2011,2,,2011,349.

Salhotra G., Bajpai V., Singh R.K.,Finite element modeling of orthogonal cutting of pyrolytic carbon,ASME 2011 International Manufacturing Science and Engineering Conference, MSEC 2011,1,,2011,153.

Bajpai V., Singh R.K.,Orthogonal micro-grooving of anisotropic pyrolyticcarbon,Materials and Manufacturing Processes,26,12,2011,1481.

Lekkala R., Bajpai V., Singh R.K., Joshi S.S.,Characterization and modeling of burr formation in micro-end milling,Precision Engineering,35,4,2011,625.

Bajpai V., Salhotra G., Singh R.K.,Micromachining characterization of anisotropic pyrolytic carbon,Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture,225,9,2011,1591.

Singh R.K., Joseph V.R., Melkote S.N.,A statistical approach to the optimization of a laser-assisted micromachining process,International Journal of Advanced Manufacturing Technology,53,43191,2011,221.

Mall A., Agrawal A., Singh R.K., Joshi S.S.,Numerical characterization of laminar bulk flow over textured surfaces,Journal of Micro/Nanolithography, MEMS, and MOEMS,10,2,2011,23008.

Garg M., Agrawal A., Singh R.K., Joshi S.S.,Microscopic textured surfaces for micro-fluidic applications,International Journal of Automation Technology,5,1,2011,30.

Dongre G.G., Vesvikar C., Singh R.K., Joshi S.S.,Efficient dicing of silicon ingots for photovoltaic applications,Conference Record of the IEEE Photovoltaic Specialists Conference,,,2010,3629.

Mujumdar S.S., Mastud S.A., Singh R.K., Joshi S.S.,Experimental characterization of the reverse micro-electrodischarge machining process for fabrication of high-aspect-ratio micro-rod arrays,Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture,224,5,2010,777.

Mastud S.A., Singh R.K., Joshi S.S.,Investigation of reverse micro-EDM process for generating high aspect ratio micro-electrode arrays,International Conferences on Multi-Material Micro Manufacture, 4M/International Conferences on Micro Manufacturing, ICOMM,,,2009,153.

Joshi M., Singh R.K., Joshi S.S., Balasubramaniam R., Suri V.K.,Preliminary investigation of hydrodynamic nanopolishing of flat steel plates,International Conferences on Multi-Material Micro Manufacture, 4M/International Conferences on Micro Manufacturing, ICOMM,,,2009,287.

Hashimoto F., Melkote S.N., Singh R., Kalil R.,Effect of finishing methods on surface characteristics and performance of precision components in rolling-sliding contact,International Journal of Machining and Machinability of Materials,6,43132,2009,3.

Singh R., Melkote S.N.,Force modeling in laser-assisted microgrooving including the effect of machine deflection,Journal of Manufacturing Science and Engineering, Transactions of the ASME,131,1,2009,110131.

Singh R.K., Melkote S.N.,Laser-assisted mechanical micromachining,Smart Devices and Machines for Advanced Manufacturing,,,2008,337.

Singh R., Alberts M.J., Melkote S.N.,Characterization and prediction of the heat-affected zone in a laser-assisted mechanical micromachining process,International Journal of Machine Tools and Manufacture,48,9,2008,994.

Singh R.K., Melkote S.N.,Force modeling for laser assisted micro-grooving,Proceedings of the ASME International Manufacturing Science and Engineering Conference 2007, MSEC2007,,,2007,371.

Singh R., Melkote S.N.,Characterization of a hybrid laser-assisted mechanical micromachining (LAMM) process for a difficult-to-machine material,International Journal of Machine Tools and Manufacture,47,43319,2007,1139.

Singh R., Melkote S.N.,Hybrid laser-assisted mechanical micromachining (LAMM) process for hard-to-machine materials,Journal of Laser Micro Nanoengineering,2,2,2007,156.

Singh R., Mattoo A., Saigal A.,Optimizing the design and impact behavior of a polymeric enclosure,Materials and Design,27,10,2006,955.

Singh R., Melkote S.N.,Experimental characterization of Laser-Assisted Mechanical Micromachining (LAMM) process,American Society of Mechanical Engineers, Manufacturing Engineering Division, MED,43147,,2005,957.

Singh R., Melkote S.N., Hashimoto F.,Frictional response of precision finished surfaces in pure sliding,Wear,258,10,2005,1500.

Saigal A., Greif R., Singh R.,Recycled ABS core / ASA composite polymeric enclosures,Proceedings of the International Conference on Restoration, Recycling and Rejuvenation Technology for Engineering and Architecture Application,,,2004,312.

Singh R., Kalil R., Melkote S.N., Hashimoto F.,Correlation of 3-D precision machined surface topography with frictional response,American Society of Mechanical Engineers, Manufacturing Engineering Division, MED,15,,2004,871.

Singh R., Saigal A., Greif R.,Impact behavior of recycled core composite polymeric enclosures,Composite Structures,61,4,2003,321.