U. Tewary, D. Mukherjee, A. Alankar, G. Mohapatra, S. Sahay, I. Samajdar, and S. Karagadde, An Integrated Multi-Scale Model for Graphite Growth Mechanism in Industrial Cast Iron, Metallurgical and Materials Transactions B, , , 2021, , 1-19

Kumar, Virkeshwar; Srivastava, Atul; Karagadde, Shyamprasad;,Real-Time Observations of Density Anomaly Driven Convection and Front Instability During Solidification of Water,Journal of Heat Transfer,140,4,2018,42503.

Guo, Enyu; Shuai, Sansan; Kazantsev, Daniil; Karagadde, Shyamprasad; Phillion, AB; Jing, Tao; Li, Wenzhen; Lee, Peter D;,The influence of nanoparticles on dendritic grain growth in Mg alloys,Acta Materialia,152,,2018,127-137.

Azeem, MA; Lee, PD; Phillion, AB; Karagadde, S; Rockett, P; Atwood, RC; Courtois, L; Rahman, KM; Dye, D;,Revealing dendritic pattern formation in Ni, Fe and Co alloys using synchrotron tomography,Acta Materialia,128,,2017,241-248.

Patne, Hemant S; Kumar, Ankit; Karagadde, Shyamprasad; Joshi, Suhas S;,Modeling of temperature distribution in drilling of titanium,International Journal of Mechanical Sciences,133,,2017,598-610.

Kumar, Virkeshwar; Kumawat, Mitesh; Srivastava, Atul; Karagadde, Shyamprasad;,Mechanism of flow reversal during solidification of an anomalous liquid,Physics of Fluids,29,12,2017,123603.

Cai, B; Lee, PD; Karagadde, S; Marrow, TJ; Connolley, T;,Time-resolved synchrotron tomographic quantification of deformation during indentation of an equiaxed semi-solid granular alloy,Acta Materialia,105,,2016,338-346.

Katiyar, Gaurav; Karagadde, Shyamprasad; Saha, Sandip K; Sharma, Atul;,Numerical modelling of bubble growth in microchannel using Level Set Method,International Journal of Heat and Mass Transfer,101,,2016,719-732.

Mills, Kenneth C; Karagadde, Shyamprasad; Lee, Peter David; Yuan, Lang; Shahbazian, Fatemeh;,Calculation of Physical Properties for Use in Models of Continuous Casting Process-Part 1: Mould Slags,ISIJ International,56,2,2016,264-273.

Karagadde, Shyamprasad; Dutta, Pradip;,A comparison of time-scales governing the interaction and growth of hydrogen bubbles with a solidifying front,International Communications in Heat and Mass Transfer,79,,2016,16-20.

Kenneth C. Mills, Shyamprasad Karagadde, Peter David Lee, Lang Yuan, Fatemeh Shahbazian;,Calculation of Physical Properties for Use in Models of Continuous Casting Process-Part 2: Steels,ISIJ International,56,2,2016,274-281.

Cai, B; Karagadde, S; Rowley, D; Marrow, TJ; Connolley, T; Lee, PD;,Time-resolved synchrotron tomographic quantification of deformation-induced flow in a semi-solid equiaxed dendritic Al_Cu alloy,Scripta Materialia,103,,2015,69-72.

Karagadde, S; Lee, PD; Cai, B; Fife, JL; Azeem, MA; Kareh, KM; Puncreobutr, C; Tsivoulas, D; Connolley, T; Atwood, RC;,Transgranular liquation cracking of grains in the semi-solid state,Nature Communications,6,,2015,8300.

Bhattacharya, Anirban; Kiran, Apoorva; Karagadde, Shyamprasad; Dutta, Pradip;,An enthalpy method for modeling eutectic solidification,Journal of Computational Physics,262,,2014,217-230.

Cai, B; Karagadde, S; Yuan, L; Marrow, TJ; Connolley, T; Lee, PD;,In situ synchrotron tomographic quantification of granular and intragranular deformation during semi-solid compression of an equiaxed dendritic Al_Cu alloy,Acta Materialia,76,,2014,371-380.

Karagadde, S; Yuan, L; Shevchenko, N; Eckert, S; Lee, PD;,3-D microstructural model of freckle formation validated using in situ experiments,Acta Materialia,79,,2014,168-180.

Bhattacharya, Anirban; Karagadde, Shyamprasad; Dutta, Pradip;,An equivalent undercooling model to account for flow effect on binary alloy dendrite growth rate,International Communications in Heat and Mass Transfer,47,,2013,15-19.

Karagadde, Shyamprasad; Sundarraj, Suresh; Dutta, Pradip;,A model for growth and engulfment of gas microporosity during aluminum alloy solidification process,Computational Materials Science,65,,2012,383-394.

Karagadde, Shyamprasad; Bhattacharya, Anirban; Tomar, Gaurav; Dutta, Pradip;,A coupled VOF_IBM_enthalpy approach for modeling motion and growth of equiaxed dendrites in a solidifying melt,Journal of Computational Physics,231,10,2012,3987-4000.

Karagadde, Shyamprasad; Sundarraj, Suresh; Dutta, Pradip;,Modeling growth of hydrogen bubbles in aluminum castings using the level-set method,Scripta Materialia,61,2,2009,216-219.