Skip to content Skip to navigation

Publications

Prof. Sushil Mishra

Amit Kumar Singh , Yasham Mundada , Priyanshu Bajaj, Markus B. Wilms, Jeet P Patil, Sushil Kumar Mishra, Eric A. Jäglec, Amit Arora, Investigation of temperature distribution and solidification morphology in multilayered directed energy deposition of Al-0.5Sc-0.5Si alloy, nternational Journal of Heat and Mass Transfer, 186, 122492, 2022, https://doi.org/10.1016/j.ijheatmasstransfer.2021.122492,
SR Singh, J Vasavada, RG Mote, SK Mishra, To study the effect of Microstructures on Machinability of Inconel-718 Superalloy in Micro-drilling process, Journal of Manufacturing Science and Engineering, 143, 7, 2021, https://doi.org/10.1115/1.4050176, 8
Sagar Ingle, Chandra Sekher Yerramalli, Anirban Guha, Sushil Mishra, Effect of material properties on ballistic energy absorption of woven fabrics subjected to different levels of inter-yarn friction, Composite Structures, 266, , 2021, https://doi.org/10.1016/j.compstruct.2021.113824,
Microstructure and texture evolution of complete Mg-3Al-0.2 Ce alloy blanks upon multi-pass friction stir processing with spiral strategy, Microstructure and texture evolution of complete Mg-3Al-0.2 Ce alloy blanks upon multi-pass friction stir processing with spiral strategy, Materials Today Communications, 26, , 2021, https://doi.org/10.1016/j.mtcomm.2020.101850,
JP Patil, V Nandedkar, S Mishra, SK Saha, Transient thermal analysis of close pressure thermoforming process, Journal of Manufacturing Processes, 62, , 2021, https://doi.org/10.1016/j.jmapro.2020.12.057, 513-522
AS Chauhan, JS Jha, S Telrandhe, V Srinivas, AA Gokhale, SK Mishra, Laser surface treatment of α-β titanium alloy to develop a β-rich phase with very high hardness, Journal of Materials Processing Technology , 288, , 2021, https://doi.org/10.1016/j.jmatprotec.2020.116873,
A Kumar, N Gotawala, S Mishra, A Shrivastava, Defects, microstructure and mechanical behaviour upon multi-pass friction stir processing of magnesium alloy with spiral tool path, CIRP Journal of Manufacturing Science and Technology, 32, , 2021, https://doi.org/10.1016/j.cirpj.2020.12.006, 170-178
, Surface Gas Nitriding of Titanium (Ti–6Al–4V) Alloy, S Chakrabarty, SR Panda, JS Jha, SK Mishra, Advances in Mechanical Processing and Design, , , 2021, https://doi.org/10.1007/978-981-15-7779-6_51, 561-568
JP Patil, YS Gaikhe, V Nandedkar, S Mishra, Effect of Sheet Temperature on Thickness Distribution of the Thermoformed Hemispherical Dome, Advances in Mechanical Processing and Design, , , 2021, https://doi.org/10.1007/978-981-15-7779-6_42, 479-487
H Maharaja, S Mishra, P Patel, SK Mishra, JS Jha, Understanding the Deformation Micro-mechanism in Ti–6Al–4V Alloy U-Notched Specimen , Advances in Mechanical Processing and Design, , , 2021, https://doi.org/10.1007/978-981-15-7779-6_44, 499-505
S Mishra, H Maharaja, SK Mishra, J Vasavada, JS Jha, Influence of Annealing Time on Local Texture Evolution in Forged Ti–6Al–4V Alloy , , Advances in Mechanical Processing and Design, , , 2021, https://doi.org/10.1007/978-981-15-7779-6_45, 507-513
P. Seth, J. Jha, A. Alankar, S. Mishra, α-case formation in Ti-6Al-4V in a different oxidizing envi- ronment and its effect on tensile and fatigue crack growth behavior, Oxidation of Metals, , , 2021, , p. 1
G Shete, S Mishra, S Karagadde, A Srivastava, On the phenomena of partial crystallization of highly undercooled magnesium silicate molten droplets, Scientific Reports, 11, 1, 2021, https://doi.org/10.1038/s41598-021-93135-6, 1-14
P Seth, JS Jha, A Alankar, SK Mishra, Alpha-case Formation in Ti–6Al–4V in a Different Oxidizing Environment and Its Effect on Tensile and Fatigue Crack Growth Behavior, Oxidation of Metals, , , 2021, https://doi.org/10.1007/s11085-021-10079-y, 1-19
JP Patil, M Paliwal, SK Mishra,, A Review on the Material Development and Corresponding Properties for Power Plant Applications, Materials Performance and Characterization, 11, 2, 2021, DOI: 10.1520/MPC20200173,
Shanta Chakrabarty, Marrapu Bhargava, Harsh Kumar Narula, Prita Pant, Sushil K Mishra, Prediction of strain path and forming limit curve of AHSS by incorporating microstructure evolution, The International Journal of Advanced Manufacturing Technology, 106, 11, 2020, https://doi.org/10.1007/s00170-020-04948-0, 5085–5098
B Marrapu, VK Barnwal, S Chakrabarty, A Tewari, SK Mishra, Experimental and Numerical Analysis on Dual Phase Steel (DP780) Sheet Forming Limit and Effect of Microstructure Evolution on Formability, Journal of Materials Engineering and Performance, 29, 12, 2020, https://doi.org/10.1007/s11665-020-05247-1, 8247-8260
JP Patil, YS Gaikhe, V Nandedkar, SK Mishra, SK Saha, Contact Analysis for Contact Thermoforming of PMMA Sheet, Materials Performance and Characterization, 9, 2, 2020, https://doi.org/10.1520/MPC20190117, 285-302
A Mashalkar, S Mishra, V Nandedkar, R Bobade, Grain Size Regulation During LDH Test , ICDSMLA 2019, , , 2020, https://doi.org/10.1007/978-981-15-1420-3_146, 1358-1365
S Chakrabarty, SR Panda, D Das, P Pant, SK Mishra, Effect of grain size and specimen thickness on formation of mechanical twin , Materials Today: Proceedings, 26, , 2020, https://doi.org/10.1016/j.matpr.2020.02.269, 1323-1329
A Kumar, N Gotawala, A Sood, S Mishra, A Shrivastava, Experimental Investigation of Raster Tool Path Strategy for Friction Stir Processing of Magnesium Alloy , Magnesium Technology, , , 2020, https://doi.org/10.1007/978-3-030-36647-6_51, 341-346
A Kumar, A Sood, N Gotawala, S Mishra, A Shrivastava, Friction Stir Processing of Magnesium Alloy with Spiral Tool Path Strategy , Magnesium Technology, , , 2020, https://doi.org/10.1007/978-3-030-36647-6_31, 197-205
J Vasavada, HK Narula, S Mishra, TK Nandy, A Tewari, Development of novel Moving Wave Front image processing algorithm and microstructural quantification of Tungsten Heavy Alloy 170, , Computational Materials Science , 170, , 2019, https://doi.org/10.1016/j.commatsci.2019.109181, 10918
VK Barnwal, S Chakrabarty, A Tewari, K Narasimhan, SK Mishra, Influence of Single-Point Incremental Force Process Parameters on Forming Characteristics and Microstructure Evolution of AA-6061 Alloy Sheet, Journal of Materials Engineering and Performance, 28, 11, 2019, https://doi.org/10.1007/s11665-019-04446-9, 7141-7154
C Gupta, JS Jha, B Jayabalan, R Gujrati, A Alankar, S Mishra, Correlating Hot Deformation Parameters with Microstructure Evolution During Thermomechanical Processing of Inconel 718 Alloy, Metallurgical and Materials Transactions A, 50, 10, 2019, 4714-4731, https://doi.org/10.1007/s11661-019-05380-0
JS Jha, SP Toppo, R Singh, A Tewari, SK Mishra, Understanding flow behavior and microstructure evolution during thermomechanical processing of mill-annealed Ti-6Al-4V titanium alloy, Materials Performance and Characterization , 8, 5, 2019, https://doi.org/10.1520/MPC20190010, 916-931
JS Jha, S Dhala, SP Toppo, R Singh, A Tewari, SK Mishra, B Jayabalan, Effect of strain amplitude on low cycle fatigue and microstructure evolution in Ti-6Al-4V: A TKD and TEM characterization, Materials Characterization, 155, , 2019, https://doi.org/10.1016/j.matchar.2019.109829, 109829
A Gupta, RK Khatirkar, T Dandekar, JS Jha, S Mishra, Recrystallization behavior of a cold rolled Ti–15V–3Sn–3Cr–3Al alloy , Journal of Materials Research , 34, 18, 2019, DOI: 10.1557/jmr.2019.225, 3082-3092
JP Patil, V Nandedkar, S Saha, S Mishra, A numerical approach on achieving uniform thickness distribution in pressure thermoforming , Manufacturing Letters , 21, , 2019, https://doi.org/10.1016/j.mfglet.2019.07.003, 24-27
S Dhala, S Mishra, A Tewari, A Alankar, Analyses of orientation dependent nanoindentation response of pseudoelastic NiTi alloy using a crystal plasticity model, Mechanics of Materials , 135, , 2019, https://doi.org/10.1016/j.mechmat.2019.04.021, 1-12
JS Jha, SP Toppo, R Singh, A Tewari, SK Mishra, Flow stress constitutive relationship between lamellar and equiaxed microstructure during hot deformation of Ti-6Al-4V , Journal of Materials Processing Technology, 270, , 2019, https://doi.org/10.1016/j.mechmat.2019.04.021, 216-227
JS Jha, SP Toppo, R Singh, A Tewari, SK Mishra, Flow stress constitutive relationship between lamellar and equiaxed microstructure during hot deformation of Ti-6Al-4V, Journal of Materials Processing Technology, 270, , 2019, https://doi.org/10.1016/j.jmatprotec.2019.02.030, 216-227
JS Jha, B Jayabalan, SP Toppo, R Singh, A Tewari, SK Mishra, Hot deformation behaviour of Ti-6Al-4V alloy with a transformed microstructure: a multimodal characterisation , Philosophical Magazine , 99, 12, 2019, https://doi.org/10.1080/14786435.2019.1584409, 1429-1459
S Dhala, S Mishra, A Tewari, A Alankar, Modeling of finite deformation of pseudoelastic NiTi shape memory alloy considering various inelasticity mechanisms, International Journal of Plasticity, 115, , 2019, https://doi.org/10.1016/j.ijplas.2018.11.018, 216-237
R Gujrati, C Gupta, JS Jha, S Mishra, A Alankar, Understanding activation energy of dynamic recrystallization in Inconel 718, Materials Science and Engineering: A , 744, , 2019, https://doi.org/10.1016/j.msea.2018.12.008, 638-651
JP PATIL, VM NANDEDKAR, S MISHRA, Thermal analysis of the heating stage of the thermoforming process , Blue Eyes Intelligence Engineering and Sciences Publication, , , 2019, ,
Telrandhe S.V., Bhagyaraj J., Mishra S., Karagadde S.,A new approach to control and optimize the laser surface heat treatment of materials,Journal of Materials Processing Technology,262,,2018,492.
Sahu J., Chakrabarty S., Raghavan R., Mishra S.,Investigations of size effect on formability and microstructure evolution in SS304 thin foils,Journal of Strain Analysis for Engineering Design,53,7,2018,517.
Bhargava M., Chakrabarty S., Barnwal V.K., Tewari A., Mishra S.K.,Effect of microstructure evolution during plastic deformation on the formability of Transformation Induced Plasticity and Quenched & Partitioned AHSS,Materials and Design,152,,2018,65.
Kumar A., Singh A.K., Shrivastva A., Mishra S., Narasimhan K.,Failure prediction in incremental sheet forming based on Lemaitre damage model,Journal of Physics: Conference Series,1063,1,2018,12152.
Telrandhe S.V., Jayabalan B., Paul C.P., Mishra S.K.,Microstructural Development Due to Laser Treatment and Its Effect on Machinability of Ti6Al4V Alloy,Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science,49,8,2018,3450.
Durgaprasad A., Giri S., Lenka S., Sarkar S.K., Biswas A., Kundu S., Mishra S., Chandra S., Doherty R.D., Samajdar I.,Delamination of Pearlitic Steel Wires: The Defining Role of Prior-Drawing Microstructure,Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science,49,6,2018,2037.
Durgaprasad A., Giri S., Lenka S., Kundu S., Chandra S., Mishra S., Doherty R.D., Samajdar I.,Microstructural Engineering in Eutectoid Steel: A Technological Possibility?,Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science,49,5,2018,1520.
Barnwal V.K., Chakrabarty S., Tewari A., Narasimhan K., Mishra S.K.,Forming behavior and microstructural evolution during single point incremental forming process of AA-6061 aluminum alloy sheet,International Journal of Advanced Manufacturing Technology,95,43191,2018,921.
Hodhigere Y., Jha J.S., Tewari A., Mishra S.,Finite element analysis-based approach for stress concentration factor calculation,Lecture Notes in Mechanical Engineering,,9790000000000,2018,1.
Durgaprasad A., Giri S., Lenka S., Kundu S., Mishra S., Chandra S., Doherty R.D., Samajdar I.,Microstructures and Mechanical Properties of as-Drawn and Laboratory Annealed Pearlitic Steel Wires,Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science,48,10,2017,4583.
Telrandhe S.V., Saxena A.K., Mishra S.,Effect of microstructure and cutting speed on machining behavior of Ti6Al4V alloy,Journal of Mechanical Science and Technology,31,5,2017,2177.
Durgaprasad A., Giri S., Lenka S., Kundu S., Mishra S., Chandra S., Doherty R.D., Samajdar I.,Defining a relationship between pearlite morphology and ferrite crystallographic orientation,Acta Materialia,129,,2017,278.
Barnwal V.K., Raghavan R., Tewari A., Narasimhan K., Mishra S.K.,Effect of microstructure and texture on forming behaviour of AA-6061 aluminium alloy sheet,Materials Science and Engineering A,679,,2017,56.
Biradar S., Jha J.S., Mishra S., Tewari A.,Fatigue crack growth retardation in titanium alloy,ASME 2017 Gas Turbine India Conference, GTINDIA 2017,2,,2017,.
Dhala S., Mishra S., Alankar A.,Three Dimensional Crystal Plasticity Finite Element Simulation of Notched Tensile Samples of Pseudoelastic NiTi Shape Memory Alloys,Procedia Engineering,173,,2017,786.
Jha J.S., Tewari A., Mishra S., Toppo S.,Constitutive Relations for Ti-6Al-4V Hot Working,Procedia Engineering,173,,2017,755.
Mohite N., Biradar S., Jha J.S., Mishra S., Tewari A.,Development and removal of alpha-case layer from heat treated Titanium alloys,ASME 2017 Gas Turbine India Conference, GTINDIA 2017,2,,2017,.
Bhavsar V.N., Jha J.S., Jhala G., Joseph A., Mishra S., Tewari A.,Characterization of TI-6AL-4V alloy modified by plasma nitriding process,ASME 2017 Gas Turbine India Conference, GTINDIA 2017,2,,2017,.
Barnwal V.K., Tewari A., Narasimhan K., Mishra S.K.,Effect of plastic anisotropy on forming behavior of AA-6061 aluminum alloy sheet,Journal of Strain Analysis for Engineering Design,51,7,2016,507.
Sahu J., Mishra S.,Limit dome height test of very thin brass sheet considering the scaling effect,Journal of Physics: Conference Series,734,3,2016,32114.
Telrandhe S., Saxena A.K., Sutar P., Mishra S.,Influence of Laser Heat Treatment on Machinability of Ti6Al4V Alloy,Procedia Manufacturing,5,,2016,282.
Bhargava M., Tewari A., Mishra S.K.,Forming limit diagram of Advanced High Strength Steels (AHSS) based on strain-path diagram,Materials and Design,85,,2015,149.
M Bhargava, C Shanta, T Asim, M Sushil, Texture developed during deformation of Transformation Induced Plasticity (TRIP) steels , IOP Conference Series: Materials Science and Engineering, 82, 1, 2015, , 012067
C Shanta, N Harsh, M Bhargava, P Prita, M Sushil, Development of materials model based on microstructure evolution for formability analysis of low-Ni austenitic stainless steel , IOP Conference Series: Materials Science and Engineering, 82, 1, 2015, , 012017
J Sahu, S Mishra, Size effect on mechanical behaviour of SS304, Advances in Material Forming and Joining, , , 2015, , 193-201
Chakrabarty S., Mishra S.K., Pant P.,Crystallographic orientation and boundary effects on misorientation development in austenitic stainless steel,Materials Science and Engineering A,617,,2014,228.
Mishra S.K., Tiwari S.M., Carter J.T., Tewari A.,Texture evolution during annealing of AZ31 Mg alloy rolled sheet and its effect on ductility,Materials Science and Engineering A,599,,2014,1.
Raghavan R.S., Tiwari S.M., Mishra S.K., Carsley J.E.,Recovery quantification and onset of recrystallization in aluminium alloys,Philosophical Magazine Letters,94,12,2014,755.
Mishra S.K., Tatiparti S.S.V., Tiwari S.M., Raghavan R.S., Carsley J.E., Li J.,Annealing response of AA5182 deformed in plane strain and equibiaxial strain paths,Philosophical Magazine,93,20,2013,2613.
Coryell J., Savic V., Hector L., Mishra S.,Temperature effects on the deformation and fracture of a quenched-and-partitioned steel,SAE Technical Papers,2,,2013,.
Zachariah Z., Tatiparti S.S.V., Mishra S.K., Ramakrishnan N., Ramamurty U.,Tension-compression asymmetry in an extruded Mg alloy AM30: Temperature and strain rate effects,Materials Science and Engineering A,572,,2013,8.
Bhargava M., Tewari A., Mishra S.,Strain path diagram simulation of AA 5182 Aluminum alloy,Procedia Engineering,64,,2013,1252.
Coryell J., Campbell J., Savic V., Bradley J., Mishra S., Tiwari S., Hector Jr. L.,Tensile deformation of quenched and partitioned steel - A third generation high strength steel,TMS Annual Meeting,2,,2012,555.
Mishra S.K., Tiwari S.M., Kumar A.M., Hector Jr. L.G.,Effect of strain and strain path on texture and twin development in austenitic steel with twinning-induced plasticity,Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science,43,5,2012,1598.
Mukherjee S., Mishra S.K., Samajdar I., Pant P.,Local strain calculations using Electron Backscattered Diffraction (EBSD) measurements and digital image processing,Materials Science Forum,702-703,,2012,562.
Li J., Hu S.J., Carsley J.E., Lee T.M., Hector Jr. L.G., Mishra S.,Postanneal mechanical properties of prestrained AA5182-O sheets,Journal of Manufacturing Science and Engineering, Transactions of the ASME,133,6,2011,61007.
Li J., Hu S.J., Carsley J.E., Lee T.M., Hector Jr. L.G., Mishra S.,Post-anneal mechanical properties of pre-strained AA5182-O sheets,ASME 2011 International Manufacturing Science and Engineering Conference, MSEC 2011,1,,2011,475.
Raveendra S., Kanjarla A.K., Paranjape H., Mishra S.K., Mishra S., Delannay L., Samajdar I., Van Houtte P.,Strain mode dependence of deformation texture developments: Microstructural origin,Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science,42,7,2011,2113.
Azeem M.A., Tewari A., Mishra S., Gollapudi S., Ramamurty U.,Development of novel grain morphology during hot extrusion of magnesium AZ21 alloy,Acta Materialia,58,5,2010,1495.
Tewari A., Mishra S., Tiwari S.,Understanding texture domains and relations between pre-eutectic and eutectic phase during Al-Si alloy solidification,Transactions of the Indian Institute of Metals,62,43224,2009,343.
Mishra S.K., Pant P., Narasimhan K., Rollett A.D., Samajdar I.,On the widths of orientation gradient zones adjacent to grain boundaries,Scripta Materialia,61,3,2009,273.
Karthikeyan T., Thomas Paul V., Mishra S.K., Saroja S., Vijayalakshmi M., Samajdar I.,Effect of thermomechanical treatment on the grain boundary character distribution in a 9Cr-1Mo ferritic steel,Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science,40,9,2009,2030.
Mishra S.K., Desai S.G., Pant P., Narasimhan K., Samajdar I.,Improved predictability of forming limit curves through microstructural inputs,International Journal of Material Forming,2,1,2009,59.
Mishra S.K., Pant P., Narasimhan K., Samajdar I.,Effect of strain and strain path on deformation twinning and strain induced martensite in AISI 3161 and 3041 austenitic stainless steel,Ceramic Transactions,200,,2008,257.
Parvathavarthini N., Dayal R.K., Kaul R., Ganesh P., Khare J., Nath A.K., Mishra S.K., Samajdar I.,Novel laser surface treatment approach to suppress sensitisation in modified type 316(N) stainless steel weld metal,Science and Technology of Welding and Joining,13,4,2008,335.
Mandal S., Mishra S.K., Kumar A., Samajdar I., Sivaprasad P.V., Jayakumar T., Raj B.,Evolution and characterization of dynamically recrystallized microstructure in a titanium-modified austenitic stainless steel using ultrasonic and EBSD techniques,Philosophical Magazine,88,6,2008,883.
Mishra S., Narasimhan K., Samajdar I.,Deformation twinning in AISI 316L austenitic stainless steel: Role of strain and strain path,Materials Science and Technology,23,9,2007,1118.
JS Jha, SP Toppo, R Singh, A Tewari, SK Mishra, Deformation behavior of Ti-6Al-4V microstructures under uniaxial loading: Equiaxed Vs. transformed-β microstructures, Materials Characterization, 171, , , https://doi.org/10.1016/j.matchar.2020.110780,

Department of Mechanical Engineering
Indian Institute of Technology Bombay,
Powai, Mumbai 400 076,
Maharashtra, India.

Email: office.me[at]iitb.ac.in
Phone: (+91) 22 - 2576 7501/02/03
Fax: (+91) 22 - 2572 6875

Webmaster: webmaster.me[at]iitb.ac.in

 

User menu

.