Advanced Manufacturing
Processes Lab (AMPL)
AMPL
Journal Publications
  1. Mishra, N.K., Manikandan, S.G.K., & Shrivastava, A. Interfacial inhomogeneous plastic deformation during rotary friction welding of dissimilar AA2219-SS321 joint combination with AA6061 interlayer. Journal of Advanced Joining Processes
  2. Singh, R., Ajay, V, & Shrivastava, A. Insights into fatigue crack propagation behaviour of WAAM produced SS316 stainless steel: Molecular dynamics simulation and experimental analysis. Engineering Failure Analysis
  3. Singh, R., & Shrivastava, A. (2024). Understanding the anisotropic mechanical behaviour and dislocation analysis of additively manufactured CoCr alloy: insight from atomistic simulation. Journal of Materials Science
  4. Nakrani, J., Mishra, N.K., Ajay, V, Yan, W., & Shrivastava, A. (2024). Viability of WAAM for fabrication/repair of SS316: Fatigue crack growth behavior for varied notch locations in the vicinity of WAAM-substrate interface. Theoretical and Applied Fracture Mechanics, 133, 104527
  5. Mishra, N.K., Manikandan, S.G.K., Neethu, N., Shrivastava, A. (2023). Influence of Cu/Ni interlayers on rotary friction welded dissimilar SS321–Ti6Al4V joints. Materials and Manufacturing Processes
  6. Mishra, N.K., Chaurasiya, Y.K., & Shrivastava, A. (2023). Dissimilar interface and joint strength of SS 304 and titanium friction stir spot welds: a numerical and experimental analysis. The International Journal of Advanced Manufacturing Technology
  7. Ajay, V., Nakrani, J., Mishra, N.K., & Shrivastava, A. (2023). Anisotropic fatigue crack propagation in wire arc additively manufactured 316L stainless steel. International Journal of Fatigue, 177, 107976.
  8. Nakrani, J., Yan, W., & Shrivastava, A. (2023). Effect of notch location on fatigue crack growth behavior for inhomogeneous material domains in friction stir welded magnesium alloy. International Journal of Fatigue, 177, 107956.
  9. Gotawala, N., & Shrivastava, A. (2023). X-ray tomography and characterization of dissimilar interface revealing the interplay of intermetallics, interlocking, and voids on joint strength of Al6061 and AZ31Mg dissimilar friction stir welds. CIRP Journal of Manufacturing Science and Technology, 44, 70-81.
  10. Kumar, A., Mehtani, H.K., Shrivastava, A., Mishra, S., Samajdar, I., & Narasimhan, K. (2023). Failure Mechanism during Incremental Sheet Forming of a Commercial Purity Aluminum Alloy. Engineering Failure Analysis, 146, 107090.
  11. Mishra, N.K., & Shrivastava, A. (2023). Improvement in strength and ductility of rotary friction welded Inconel 600 and stainless steel 316L with Cu interlayer. CIRP Journal of Manufacturing Science and Technology, 41, 19-29.
  12. Kumar,A., Singh, A.K., Shrivastava,A., Mishra, S., & Narasimhan, K. (2022). Shear modified Lemaitre damage model for fracture prediction during incremental sheet forming. International Journal of Solids and Structures, 252, 111822.
  13. Gotawala, N., Mishra, N., K., & Shrivastava, A. (2022). Solid-state deposition of multilayer SS304 by friction stir metal deposition. Materials Letters, 314, 131881.
  14. Kumar, A., Shrivastava, A., Narasimhan, K. & Mishra, S. (2022) Microstructure and texture evolution during incremental sheet forming of AA1050 alloy. Journal of Materials Science, 57, 6385-6398.
  15. Gotawala, N., & Shrivastava, A. (2021). Thermodynamics-based analysis of formation and growth of FeTi and β-Ti during friction stir welding of SS304 and pure titanium. Journal of Materials Science, 56(34), 19180-19198.
  16. Gotawala, N., & Shrivastava, A. (2021). Investigation of interface microstructure and mechanical properties of rotatory friction welded dissimilar aluminum-steel joints. Materials Science and Engineering: A, 825, 141900.
  17. Ghate, N. D., & Shrivastava, A. (2021). Numerical and experimental investigation of complex surface topography evolution during laser surface modification with raster scan. Journal of Manufacturing Processes, 69, 368-377.
  18. Gotawala, N., Kumar, A., Mishra, S., & Shrivastava, A. (2021). Microstructure and texture evolution of complete Mg-3Al-0.2 Ce alloy blanks upon multi-pass friction stir processing with spiral strategy. Materials Today Communications, 26, 101850.
  19. Ghate, N. D., & Shrivastava, A. (2021). Laser processing of multiple surface characteristics for Ti6Al4V biomedical implants.Materials and Manufacturing Processes, 36(3), 308-315.
  20. Kumar, A., Gotawala, N., Mishra, S., & Shrivastava, A. (2021). Defects, microstructure and mechanical behaviour upon multi-pass friction stir processing of magnesium alloy with spiral tool path. CIRP Journal of Manufacturing Science and Technology, 32, 170-178.
  21. Gotawala, Nikhil, and Amber Shrivastava. "Microstructural analysis and mechanical behavior of SS 304 and titanium joint from friction stir butt welding. Materials Science and Engineering: A (2020): 139658.
  22. Gotawala N., & Shrivastava, A. (2020). Analysis of material distribution in dissimilar friction stir welded joints of Al 1050 and copper. Journal of Manufacturing Processes, 57, 1-14.
  23. Ghate, N. D., Sood, A., Srivastava, A., & Shrivastava, A. (2020). Ductile Fracture based Joint Formation Mechanism during Friction Stir Welding. International Journal of Mechanical Sciences , 168.
  24. Gotawala N., Wadighare, A., & Shrivastava, A. (2019). Phase transformation during friction stir processing of dual phase 600 Steel. Journal of Materials Science , 1-14.
  25. Shrivastava, A., Zinn, M., Duffie, N. A., Ferrier, N. J., Smith, C. B., & Pfefferkorn, F. E. (2017). Force measurement-based discontinuity detection during friction stir welding. Journal of Manufacturing Processes , 26, 113-121.
  26. Schmale, J., Fehrenbacher, A., Shrivastava, A., & Pfefferkorn, F. E. (2016). Calibration of dynamic tool-workpiece interface temperature measurement during friction stir welding. Measurement , 88, 331-342.
  27. Shrivastava, A., Pfefferkorn, F. E., Duffie, N. A., Ferrier, N. J., Smith, C. B., Malukhin, K., & Zinn, M. (2015). Physics-based process model approach for detecting discontinuity during friction stir welding. The International Journal of Advanced Manufacturing Technology , 79(1-4), 605-614.
  28. Shrivastava, A., Overcash, M., & Pfefferkorn, F. E. (2015). Prediction of unit process life cycle inventory (UPLCI) energy consumption in a friction stir weld. Journal of Manufacturing Processes , 18, 46-54.
  29. Shrivastava, A., Krones, M., & Pfefferkorn, F. E. (2015). Comparison of energy consumption and environmental impact of friction stir welding and gas metal arc welding for aluminum. CIRP Journal of Manufacturing Science and Technology , 9, 159-168.
  30. Shrivastava, A., Dingler, C., Zinn, M., & Pfefferkorn, F. E. (2015). Physics-based interpretation of tool-workpiece interface temperature signals for detection of defect formation during friction stir welding. Manufacturing Letters , 5, 7-11.
  31. Shrivastava, A., Williams, B., Siahpush, A. S., Savage, B., & Crepeau, J. (2014). Numerical and experimental investigation of melting with internal heat generation within cylindrical enclosures. Applied Thermal Engineering , 67(1-2), 587-596.
Book/Book Chapters
  1. Shrivastava, A., Krones, M., & Pfefferkorn, F.E., Joining Processes, in Energy Efficient Manufacturing Theory and Applications. Ed. Sutherland, J.W., Dornfeld, D.A., & Linke B.S., Hoboken, NJ, USA , John Wiley & Sons, 2018, pp. 186-201.
  2. New Horizons in Metallurgy, Materials and Manufacturing. Ed. Shrivastava, A., Arora, A., Srivastava, C., Dhawan, N., & Singh, S.S., Springer Nature, 2022
Patents
  1. Shrivastava, A., Kumar, M., & Kumar, S. S. An apparatus for applying adhesive tape. Indian patent no. 201921037475, Sep 17, 2019.
Conference Papers/Presentations/Posters
  1. Ajay,V., & Shrivastava A. (2024).A real time vision system to measure bead geometry for wire arc additive manufacturing. In: WCMNM 2024 (September), Pattaya, Thailand.
  2. Nakrani J., Mishra N.K., Yan W., & Shrivastava A. (2024). Fatigue crack propagation in rotary friction welded Inconel 600 and SS316L joint. In: 153rd Annual Meeting, TMS 2024 (March), Florida, USA.
  3. Mishra, N.K., Manikandan, S.G.K., Neethu, N., Jebasihamony, C., & Shrivastava, A. (2024). Effect of Interlayer Towards the Joint Properties Enhancement of Dissimilar Friction Welded SS321-AA2219. In: 153rd Annual Meeting, TMS 2024 (March), Florida, USA.
  4. Mishra, N.K., Nakrani, J., Ajay, V., & Shrivastava, A. (2024). Microstructural Evolution and Anisotropy in Stainless Steel 316L from Wire Arc Additive Manufacturing. In: 153rd Annual Meeting, TMS 2024 (March), Florida, USA.
  5. Mishra, N.K., Nakrani, J., & Shrivastava, A. (2024). Solid State Deposition of Inconel Super Alloy: Structure and Property Relationship. In: 153rd Annual Meeting, TMS 2024 (March), Florida, USA.
  6. Ajay, V., & Shrivastava, A. (2024). Numerical Analysis of Heat Accumulation during Wire Arc Additive Manufacturing. In: 153rd Annual Meeting, TMS 2024 (March), Florida, USA.
  7. Vaidya, P., & Shrivastava, A. (2024). Phase Transformation Upon Dissimilar Laser Welding of Al5083 and SS304. In: 153rd Annual Meeting, TMS 2024 (March), Florida, USA.
  8. Nakrani J., Yan W., & Shrivastava A. (2023). Fatigue crack growth behavior of friction stir welded SS304-Al5083 dissimilar joints. In: 3rd International Workshop on Plasticity, Damage and Fracture of Engineering Materials, 2023 (October), Istanbul, Turkey.
  9. Ajay, V., Nakrani, J., Mishra, N., & Shrivastava, A. (2023). Fatigue crack growth behaviour of SS316L deposition from wire arc additive manufacturing. In Manufacturing Letters (2023), 35, (pp. 658-664).
  10. Mishra, N., & Shrivastava, A. (2023). Joint properties assessment of rotary friction welded Inconel 600 and stainless steel 316L with Al interlayer. International Conference on Advances in Structural Alloys and Their Manufacturing. 2023 (January), Singapore.
  11. Ajay, V., Nakrani, J., Mishra, N., & Shrivastava, A. (2022). Fatigue crack growth behaviour of SS316L deposition from wire arc additive manufacturing. 76th Annual Technical Meeting 2022 (November), Hyderabad, India by the Indian Institue of Metals.
  12. Nakrani, J., Shrivastava, A., & Yan, W. (2022). Numerical simulation of fatigue crack geowth in AZ31 Mg alloy weld joint. 76th Annual Technical Meeting 2022 (November), Hyderabad, India by the Indian Institue of Metals.
  13. Mishra, N., & Shrivastava, A. (2022). Dissimilar Rotary Friction Welding of Ti6Al4V and SS321 using interlayers. 76th Annual Technical Meeting 2022 (November), Hyderabad, India by the Indian Institue of Metals.
  14. Gotawala, N., & Shrivastava, A. (2022). Microstructure and texture analysis of friction stir welded AZ31 Mg and Al 6061 joint. In Magnesium Technology 2022 (pp. 191-196). Springer, Cham.
  15. Gotawala, N., Mishra, N., & Shrivastava, A. (2022). Microstructure and mechanical properties of friction stir deposited SS304. In TMS 2022 151st Annual Meeting & Exhibition Supplemental Proceedings (pp. 269-278). Springer, Cham.
  16. Mishra, N., & Shrivastava, A. (2022). Microstructure and mechanical properties of rotary friction welded IN-600 and SS316L with Copper interlayer. In TMS 2022 151st Annual Meeting & Exhibition Supplemental Proceedings (pp. 1067-1076). Springer, Cham.
  17. Ghate, N. D., & Shrivastava, A. (2021). Power spectral analysis of surface microtopography formed in CW Laser surface texturing. Procedia Manufacturing, 53, 197-203.
  18. Gotawala, N., & Shrivastava, A. (2021). Analysis of Al 6061 and Mild Steel Joints from Rotary Friction Welding. In TMS 2021 150th Annual Meeting & Exhibition Supplemental Proceedings (pp. 669-678). Springer, Cham.
  19. Gotawala, N., & Shrivastava, A. (2021). Effect of Diffusion on Intermetallics at Interface During Friction Stir Welding of Stainless Steel and Pure Titanium. In Friction Stir Welding and Processing XI (pp. 135-146). Springer International Publishing.
  20. Ghate N.D., Gaur B., Shrivastava A. (2020) Effect of Scanning Strategy on Additively Manufactured Ti6Al4V. In: The Minerals, Metals & Materials Society (eds) TMS 2020 149th Annual Meeting & Exhibition Supplemental Proceedings. The Minerals, Metals & Materials Series. Springer, Cham
  21. Ghate N.D., Pandey A., Shrivastava A. (2020) Annealing of Additively Manufactured Inconel 625. In: The Minerals, Metals & Materials Society (eds) TMS 2020 149th Annual Meeting & Exhibition Supplemental Proceedings. The Minerals, Metals & Materials Series. Springer, Cham
  22. Bhasale G.D., Sood A., Singh S.R., Pandey A., Shrivastava A. (2020) High Temperature Corrosion of Additively Manufactured Inconel 625. In: The Minerals, Metals & Materials Society (eds) TMS 2020 149th Annual Meeting & Exhibition Supplemental Proceedings. The Minerals, Metals & Materials Series. Springer, Cham.
  23. Kumar A., Sood A., Gotawala N., Mishra S., Shrivastava A. (2020) Friction Stir Processing of Magnesium Alloy with Spiral Tool Path Strategy. In: Jordon J., Miller V., Joshi V., Neelameggham N. (eds) Magnesium Technology 2020. The Minerals, Metals & Materials Series. Springer, Cham.
  24. Kumar A., Gotawala N., Sood A., Mishra S., Shrivastava A. (2020) Experimental Investigation of Raster Tool Path Strategy for Friction Stir Processing of Magnesium Alloy. In: Jordon J., Miller V., Joshi V., Neelameggham N. (eds) Magnesium Technology 2020. The Minerals, Metals & Materials Series. Springer, Cham
  25. Gotawala, N., & Shrivastava, A. (2019). Material movement during dissimilar friction stir welding of Al 1050 and copper. 57th National Metallurgist's Day & 73rd Annual Technical Meeting 2019 (November), Thiruvananthapuram, India by The Indian Institute of Metals.
  26. Gotawala, N., & Shrivastava, A. (2019). Coupled 3D thermo-mechanical and phase transformation model for fricion stir processing of dual phase 600 steel. 57th National Metallurgist's Day & 73rd Annual Technical Meeting 2019 (November), Thiruvananthapuram, India by The Indian Institute of Metals.
  27. Kumar, A., Singh, A., Shrivastava, A., Mishra, S., & Narasimhan, K. (2019). Effect of plastic anisotropy on failure prediction during incremental sheet forming of AA6061 alloy. Numiform 2019 (June), Portsmouth, USA.
  28. Gotawala, N., & Shrivastava, A. (2019). Investigation of interfacial diffusion during dissimilar friction stir welding. In: Hovanski Y., Mishra R., Sato Y., Upadhyay P., Yan D. (eds) Friction Stir Welding and Processing X. The Minerals, Metals & Materials Series, pp. 109-119.
  29. Ghate, N. D., & Shrivastava, A. (2018). Numerical and experimental analysis of laser surface modification of Ti6Al4V for biocompatible applications. World Congress on Micro and Nano Manufacturing (September), Portoroz, Slovenia.
  30. Kumar, A., Singh, A., Shrivastava, A., Mishra, S., & Narasimhan, K. (2018). Failure prediction in incremental sheet forming based on Lemaitre damage model. Numisheet 2018 (July), Tokyo, Japan.
  31. Shrivastava, A., Zinn, M., Duffie, N. A., Ferrier, N. J., Smith, C.B., & Pfefferkorn F. E. (2016). Force measurement-based discontinuity detection during friction stir welding. 44th North American Manufacturing Research Conference (June), Virginia, USA.
  32. Shrivastava, A., Zinn, M., Duffie, N. A., Ferrier, N. J., Smith, C.B., & Pfefferkorn F. E. (2015). Towards force measurement based discontinuity detection during friction stir welding. International Conference on Precision, Meso, Micro, and Nano Engineering (December), Mumbai, India.
  33. Shrivastava, A., Zinn, M., Duffie, N. A., Ferrier, N. J., Smith, C.B., & Pfefferkorn F. E. (2015). Analysis of force transients during friction stir welding. 43rd North American Manufacturing Research Conference (June), North Carolina, USA.
  34. Shrivastava, A., Zinn, M., Duffie, N. A., Ferrier, N. J., Smith, C.B., & Pfefferkorn F. E. (2015). Analysis of force transients for detecting discontinuity during friction stir welding. 144th The Minerals, Metals and Materials Society (TMS) Conference (March), Orlando, USA.
  35. Shrivastava, A., Zinn, M., Duffie, N. A., Pfefferkorn F. E., Ferrier, N. J., & Smith, C.B. (2015). Physics-based process model approach for detecting discontinuity during friction stir welding. 10th International Friction Stir Welding Symposium (May), Bejing, China.
  36. Shrivastava, A., Williams, B., Siahpush, A. S., & Crepeau, J. (2012, July). Numerical Investigation of Melting With Internal Heat Generation in a Vertical Cylindrical Geometry. ASME 2012 Heat Transfer Summer Conference (pp. 1033-1042) by American Society of Mechanical Engineers.