A 3D FEM-based model of laser heating and machining for selection of process parameters and scanning path in laser-assisted machining of Ti6Al4V

Authors: Vishwas Divse, Amit Dubey, Deepak Marla

Journal: Machining Science and Technology Under Review

Year: 2024

Development and validation of a fully coupled thermo-mechanical model for in-situ micro-rolling in laser-directed energy deposition: single-track multi-layer case

Authors: Ravi Raj, Louis Chiu, Deepak Marla, Aijun Huang

Journal: Materials & Design

Volume: 245, 113210

Year: 2024

Understanding the dynamics of in-situ micro-rolling in directed energy deposition using thermo-mechanical finite-element analyses

Authors: Ravi Raj, Louis Chiu, Deepak Marla, Aijun Huang

Journal: Finite Elements in Analysis and Design

Volume: 238, 104194

Year: 2024

A fully-coupled FEM-based 2D metallo-thermo-mechanical model of laser-assisted machining of Ti-6Al-4V-a focus on residual stresses

Authors: Akshay Bhandarkar, Ravi Raj, Vishwas Divse, Deepak Marla

Journal: Journal of Manufacturing Processes

Volume: 120, 1063-1074

Year: 2024

Using viscoplastic fluid to suppress part sedimentation in volumetric additive manufacturing

Authors: Roozbeh Salajeghe, Berin Šeta, Deepak Marla, Jon Spangenberg

Journal: Progress in Additive Manufacturing

Volume: 66, 103459

Year: 2024

Understanding the role of oxide layers on color generation and surface characteristics in nanosecond laser color marking of stainless steel

Authors: Ankit Awasthi, Deepoo Kumar, Deepak Marla

Journal: Optics and Laser Technology

Volume: 171, 110469

Year: 2024

Investigation of thermal effects of laser micromachining for APT and TEM specimen preparation: A modeling and experimental study

Authors: Anup Sharma, Suo Zhang, Jing Fu, Deepak Marla

Journal: Ultramicroscopy

Volume: 265, 114009

Year: 2024

Analysis of laser-induced surface damage of single-crystal Ni-based superalloy towards improving machinability

Authors: Srinivasa Rao Nandam, A. Venugopal Rao, Deepak Marla, Amol A. Gokhale, Suhas S. Joshi

Journal: Journal of Manufacturing Processes

Volume: 118, 357-375

Year: 2024

A computational model of laser ablation in ultra-thin SiNx layer coated silicon substrate

Authors: Pinal Rana, Anil Kottantharayil, Deepak Marla

Journal: Journal of Manufacturing Processes

Volume: 119, 1-15

Year: 2024

Laser ablation of thin SiNx layer coated on silicon wafer—evaluation of process performance for PERC solar cell application

Authors: Pinal Rana, Durga Prasad Khatri, Anil Kottantharayil, Deepak Marla

Journal: Semiconductor Science and Technology

Volume: 39(6), 065003

Year: 2024

A FEM-based coupled thermo-mechanical model of laser-assisted machining of Ti6Al4V -a focus on chip morphology

Authors: Vishwas Divse, Jyoti Nayak, Akshay Bhandarkar, Vimal Thomas, Deepak Marla

Journal: International Journal of Advanced Manufacturing Technology

Volume: 1-19

Year: 2024

A 3D computational model of nanosecond pulsed laser texturing of metals for designing engineered surfaces

Authors: Vishnu Narayanan, Ramesh Singh, Deepak Marla

Journal: Journal of Manufacturing Science & Engineering

Volume: 146(5), 051006

Year: 2024

Ply-Blocking Phenomenon and Hole Size Effects in Modeling Progressive Damage in FRP Laminates

Authors: Vishwas Divse, Suhas S Joshi, Deepak Marla

Journal: Journal of Engineering Materials and Technology

Volume: 146(2), 021001

Year: 2024

A study on the enhancement of chemical and mechanical properties of low carbon steel surface cleaned with a nanosecond pulsed laser

Authors: Vishnu Narayanan, Ramesh Singh, Deepak Marla

Journal: Journal of Laser Micro and Nanoengineering

Volume: 19(1), 40-45

Year: 2024

A 3D coupled thermo-mechanical model of laser-assisted machining of Ti-6Al-4V: forces, temperature, and tool wear analysis

Authors: Vishwas Divse, Amit Dubey, Vimal Thomas, Suhas Joshi, Deepak Marla

Journal: The International Journal of Advanced Manufacturing Technology

Volume: 128, 2739–2751

Year: 2023

A Computational Model for Stereolithography Apparatus (SLA) 3D Printing

Authors: Nandagopal Vidhu, Ayush Gupta, Roozbeh Salajeghe, Jon Spangenberg, Deepak Marla

Journal: Progress in Additive Manufacturing

Volume: 1-15

Year: 2023

Millisecond pulsed laser micro-drilling of stainless steel – optimizing hole quality using response surface methodology

Authors: Arvind Gupta, Ramesh Singh, Deepak Marla

Journal: Journal of Laser Micro and Nanoengineering

Volume: 18(3), 187-195

Year: 2023

Pulsed laser grooving of silicon under different ambient media

Authors: Tushar Ner, Pinal Rana, Deepak Marla

Journal: Lasers in Manufacturing and Materials Processing

Volume: 10(4), 626-644

Year: 2023

Numerical modeling to predict threshold fluence for material ejection in Laser-Induced forward transfer of metals

Authors: Aanjinappa Muniyallapa, Harish Chandra, Deepak Marla

Journal: Physica Scripta

Volume: 89(9), 095954

Year: 2023

Numerical modeling of part sedimentation during volumetric additive manufacturing

Authors: Roozbeh Salajeghe, Daniel Helmuth Meile, Carl Sander Kruse, Deepak Marla, Jon Spangenberg

Journal: Additive Manufacturing

Volume: 66, 103459

Year: 2023

Computational Fluid Dynamics Modeling of Top-Down Digital Light Processing Additive Manufacturing

Authors: Hesam Moghadasi, Md Tusher Mollah, Deepak Marla, Hamid Saffari, Jon Spangenberg

Journal: Polymers

Volume: 15(11), 2459

Year: 2023

Progressive damage analysis in an open hole compression of FRP laminates including fiber kinking and pre-existing damage

Authors: Vishwas Divse, Deepak Marla, Suhas S Joshi

Journal: Composites Part A: Applied Science and Manufacturing

Volume: 169, 107523

Year: 2023

Precision milling of nickel-based single-crystal superalloy by TiAlN coated small diameter solid carbide end mill

Authors: Srinivasa Rao Nandam, A. Venugopal Rao, Deepak Marla, Amol A. Gokhale, Suhas S. Joshi

Journal: Manufacturing Technology Today

Volume: 22(4), 1-7

Year: 2023

Modeling of thermal damage and residual stress in slicing of silicon wafers using wire-electrical discharge machining: comparison with experiments

Authors: Pinal Rana, Divyanshu Bhartiya, Deepak Marla

Journal: Journal of Manufacturing Processes

Volume: 85, 69-79

Year: 2023

Precise removal of ultra-thin SiNx layer deposited on silicon substrate using nanosecond green laser for PERC solar cell fabrication

Authors: Pinal Rana, Atul Singh, Anil Kottantharayil, Deepak Marla

Journal: Manufacturing Letters

Volume: 35, 58-62

Year: 2023

An experimental study on laser ablation of Ultrathin SiNx layer of PERC solar cell

Authors: Pinal Rana, Durga Prasad Khatri, Anil Kottantharayil, Deepak Marla

Journal: Journal of Micromanufacturing

Volume: 6(2), 123-130

Year: 2023

3D progressive damage modeling of fiber reinforced plastics laminates including drilling-induced damage

Authors: Vishwas Divse, Deepak Marla, Suhas S Joshi

Journal: Composites Part A: Applied Science and Manufacturing

Volume: 163, 107230

Year: 2022

A Study of Femtosecond Laser Processed Microtextures on Silicon Wafers to Enhance Optical Absorption

Authors: Anup Sharma, Deepak Marla, Suhas S Joshi, Ravi Bathe

Journal: Lasers in Manufacturing and Materials Processing

Volume: 9, 277–291

Year: 2022

Understanding the effects of picosecond laser texturing of silicon solar cells on optical and electrical properties

Authors: Anup Sharma, Deepak Marla

Journal: International Journal of Materials Engineering Innovation

Volume: 13(1), 23-32

Year: 2022

A computational model to predict surface roughness in laser surface processing of mild steel using nanosecond pulses

Authors: Vishnu Narayanan, Ramesh Singh, Deepak Marla

Journal: Journal of Manufacturing Processes

Volume: 68, 1880-1889

Year: 2021

Finite element analysis of tensile notched strength of composite laminates

Authors: Vishwas Divse, Deepak Marla, Suhas S Joshi

Journal: Composite Structures

Volume: 255, 112880

Year: 2021

Nanosecond Laser Processing for Improving the Surface Characteristics of Silicon Wafers Cut Using Wire Electrical Discharge Machining

Authors: Neelkumar Panchal, Vishnu Narayanan, Deepak Marla

Journal: Lasers in Manufacturing and Materials Processing

Volume: 8(2), 183-200

Year: 2021

Identification of wire electrical discharge machinability of SiC sintered using rapid hot pressing technique

Authors: Pinal Rana, Divyanshu Bhartiya, Meinam Annebushan Singh, Deepak Marla

Journal: Journal of Micro and Nano-Manufacturing

Volume: 8(4), 041006

Year: 2020

Methods and variables in wire electric discharge machining of Titanium alloy: A review

Authors: A. Pramanik, A.K. Basak, G. Littlefair, S. Debnath, C. Prakash, Meinam Annebushan Singh, Deepak Marla, Ramesh Singh

Journal: Heylion

Volume: 6(12), e0554

Year: 2020

Identification of wire electrical discharge machinability of SiC sintered using rapid hot pressing technique

Authors: Meinam Annebushan Singh, Kamlesh Joshi, Ondrej Hanzel, Ramesh Singh, Pavol Šajgalík, Deepak Marla

Journal: Ceramics International

Volume: 46(11), Part A, 17261-17271

Year: 2020

Laser surface modification of wire-electric discharge machined graphene nanoparticle reinforced SiC composites

Authors: Meinam Annebushan Singh, Ondrej Hanzel, Ramesh Singh, Pavol Šajgalík, Deepak Marla

Journal: Journal of Micro and Nano-Manufacturing

Volume: 8(1), 010908

Year: 2020

Influence of open voltage and servo voltage during Wire-EDM of silicon carbides

Authors: Meinam Annebushan Singh, Kamlesh Joshi, Ondrej Hanzel, Ramesh Singh, Pavol Šajgalík, Deepak Marla

Journal: Procedia CIRP

Volume: 95, 285-289

Year: 2020

Wire electrical discharge machinable SiC with GNPs and GO as the electrically conducting filler

Authors: Ondrej Hanzel, Meinam Annebushan Singh, Deepak Marla, Richard Sedlák, Pavol Šajgalík

Journal: Journal of the European Ceramic Society

Volume: 39(8), 2626-2633

Year: 2019

Numerical and experimental investigations into microchannel formation in glass substrate using electrochemical discharge machining

Authors: Dileep Kumar Mishra, Aman Kumar Verma, Julfekar Arab, Deepak Marla, Pradeep Dixit

Journal: Journal of Micromechanics and Microengineering

Volume: 29(7), 075004

Year: 2019

Experimental Investigation of Oil Mist Assisted Cooling on Orthogonal Cutting of Ti6Al4V

Authors: Siddharam Mane, Jai Ramchandani, Deepak Marla, Suhas S Joshi

Journal: Procedia Manufacturing

Volume: 34, 369-378

Year: 2019

Modeling of nanosecond pulsed laser processing of polymers in air and water

Authors: Deepak Marla, Yang Zhang, Jesper H. Hattel, Jon Spangenberg

Journal: Modelling and Simulation in Materials Science and Engineering

Volume: 26, 055007

Year: 2018

A study of laser surface modification of polymers: A comparison in air and water

Authors: Deepak Marla, Sebastian A. Andersen, Yang Zhang, Jesper H. Hattel, Jon Spangenberg

Journal: Journal of Manufacturing Processes

Volume: 32, 432-437

Year: 2018

A Thermal Model to Predict Tool Temperature in Machining of Ti-6Al-4V alloy with an Atomization-Based Cutting Fluid Spray System

Authors: Asif Tanveer, Deepak Marla, Shiv G. Kapoor

Journal: Journal of Manufacturing Science and Engineering

Volume: 139(7), 071016

Year: 2017

A Study on Curved Surface Laser Ablation Using Beam Profile Approach

Authors: Vivek Garg, Deepak Marla, Suhas S. Joshi

Journal: International Journal of Additive and Subtractive Materials Manufacturing

Volume: 1(1), 42-56

Year: 2017

A computational model for heterogeneous heating during laser irradiation of polymers doped with light absorbing micro-particles

Authors: Deepak Marla, Yang Zhang, Masoud Jabbari, Mads R. Sonne, Jon Spangenberg, Jesper H. Hattel

Journal: Applied Physics A

Volume: 122, 1042

Year: 2016

Improvement in surface characteristics of polymers for subsequent electroless plating using liquid assisted laser processing

Authors: Deepak Marla, Yang Zhang, Masoud Jabbari, Mads R. Sonne, Jon Spangenberg, Jesper H. Hattel

Journal: Physics Procedia

Volume: 83, 211-217

Year: 2016

A Computational Model to Study Film Formation and Debris Flushing Phenomena in Spray-Electric Discharge Machining

Authors: Arvind Pattabhiraman, Deepak Marla, Shiv G. Kapoor

Journal: Journal of Micro and Nano-Manufacturing

Volume: 4(3), 031002

Year: 2016

Experimental Analysis of Burr Formation in Drilling of Ti-6Al-4V Alloy

Authors: Rahul Patil, Sagar Shinde, Deepak Marla

Journal: International Journal of Mechatronics and Manufacturing Systems

Volume: 9(3), 215-236

Year: 2016

Atomized Dielectric Spray-Based Electric Discharge Machining for Sustainable Manufacturing

Authors: Arvind Pattabhiraman, Deepak Marla, Shiv G. Kapoor

Journal: Journal of Micro and Nano-Manufacturing

Volume: 3(4), 041008

Year: 2015

Models for predicting temperature dependence of material properties of aluminum

Authors: Deepak Marla, Upendra V. Bhandarkar, Suhas S. Joshi

Journal: Journal of Physics D: Applied Physics

Volume: 47, 105306

Year: 2014

A model of laser ablation with temperature-dependent material properties, vaporization, phase explosion and plasma shielding

Authors: Deepak Marla, Upendra V. Bhandarkar, Suhas S. Joshi

Journal: Applied Physics A

Volume: 116(1), 273–285

Year: 2014

Modeling of Nanosecond Laser Ablation of Metals: A focus on temperature dependence of material properties

Authors: Deepak Marla, Upendra V. Bhandarkar, Suhas S. Joshi

Journal: Manufacturing Letters

Volume: 2(2), 13–16

Year: 2014

Transient Analysis of Laser Ablation Process with Plasma Shielding: One Dimensional Model using Finite Volume Method

Authors: Deepak Marla, Upendra V. Bhandarkar, Suhas S. Joshi

Journal: Journal of Micro and Nano-Manufacturing

Volume: 1, 011007

Year: 2013

Analytical Model to Predict Temperature Distribution and Ablation Depth in Excimer Laser Micromachining

Authors: Deepak Marla, Vishal P. Barde, Suhas S. Joshi

Journal: International Journal of Precision Engineering and Manufacturing

Volume: 1, 011007

Year: 2013

Critical assessment of the issues in the modeling of ablation and plasma expansion processes in the Pulsed Laser Deposition of Metals

Authors: Deepak Marla, Upendra V. Bhandarkar, Suhas S. Joshi

Journal: Journal of Applied Physics

Volume: 109, 021101

Year: 2011

Modeling of electrochemical micromachining: comparison to experiments

Authors: Deepak Marla, Suhas S. Joshi, Sushanta K. Mitra

Journal: Journal of Micro/Nanolithography, MEMS and MOEMS

Volume: 7(3), 033015

Year: 2008